Re: [PATCH v2] i2c: designware: Fix corrupted memory seen in the ISR

From: Yann Sionneau
Date: Sun Sep 17 2023 - 16:09:33 EST

Hi all,

Le 17/09/2023 à 02:01, Serge Semin a écrit :
To += Catalin, Will

Could you please join the discussion and clarify some ARM64 barriers
aspects?

On Fri, Sep 15, 2023 at 06:47:55PM -0700, Jan Bottorff wrote:
On 9/15/2023 8:21 AM, Serge Semin wrote:
...
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index ca1035e010c7..1694ac6bb592 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -248,6 +248,14 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
/* Dummy read to avoid the register getting stuck on Bay Trail */
regmap_read(dev->map, DW_IC_ENABLE_STATUS, &dummy);

+ /*
+ * To guarantee data written by the current core is visible to
+ * all cores, a write barrier is required. This needs to be
+ * before an interrupt causes execution on another core.
+ * For ARM processors, this needs to be a DSB barrier.
+ */
+ wmb();
Based on the patch log and the comment, smp_wmb() seems to be more
suitable here since the problem looks like SMP-specific. Most
importantly the smp_wmb() will get to be just the compiler barrier on
the UP system, so no cache and pipeline flushes in that case.
Meanwhile

I am not ARM expert, but based on the problem and the DMB/DSB barriers
descriptions using DMB should be enough in your case since you only
need memory syncs.

Hi Serge,

I looked at the definition of smp_wmb, and it looks like on arm64 it uses a
DMB barrier not a DSB barrier.

In /arch/arm64/include/asm/barrier.h:
...
#define __arm_heavy_mb(x...) dsb(x)
...
#if defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP)
...
#define wmb() __arm_heavy_mb(st)
...
#define __smp_wmb() dmb(ishst)

And then in /include/asm-generic/barrier.h it says:
#ifdef CONFIG_SMP
...
#ifndef smp_wmb
#define smp_wmb() do { kcsan_wmb(); __smp_wmb(); } while (0)
#endif

This looks like wmb() is a DSB and smp_wmb() is a DMB on SMP systems, so the
two functions are not equivalent on SMP systems.
Right. They aren't. That's why I added a note regarding the DMB
instruction. Anyway see further for detailed explantation of my point.

So lets explore if we think DMB or DSB is the correct barrier.

The ARM barrier docs I referred to has a specific example that says this:

"In some message passing systems, it is common for one observer to update
memory and then send an interrupt using a mailbox of some sort to a second
observer to indicate that memory has been updated and the new
contents have been read. Even though the sending of the interrupt using a
mailbox might be initiated using a memory access, a DSB barrier
must be used to ensure the completion of previous memory accesses.

Therefore the following sequence is needed to ensure that P2 sees the
updated value.

P1:
STR R5, [R1] ; message stored to shared memory location
DSB [ST]
STR R1, [R4] ; R4 contains the address of a mailbox

P2:
; interrupt service routine
LDR R5, [R1]

Even if R4 is a pointer to Strongly-Ordered memory, the update to R1 might
not be visible without the DSB executed by P1.
It should be appreciated that these rules are required in connection to the
ARM Generic Interrupt Controller (GIC).
"

I don't positivly understand why it needs to be a DSB and not just a DMB,
but this example matches what happens in the driver. The ARM docs do some
hand waving that DSB is required because of the GIC.

Unless we can come up with a reason why this example in the ARM Barrier docs
is not a match for what happens in the i2c driver, then ARM is saying it has
to be a DSB not a DMB. If it needs to be a DSB then smb_wmb is insufficient.

Does anybody else have a different interpretation of this section in the ARM
barrier docs? They use the word mailbox, and show a shared memory write, an
interrupt triggering write, and a read of shared memory on a different core.
Some would describe that as a software mailbox.

I did read someplace (although don't have a specific reference I can give)
that ordering applied to normal memory writes are in a different group than
ordering applied between strongly ordered accesses. The excerpt from the ARM
barrier document above does say "Even if R4 is a pointer to Strongly-Ordered
memory, the update to R1 might not be visible without the DSB executed by
P1", which implies a DMB is insufficient to cause ordering between normal
memory writes and strongly-ordered device memory writes.

I know currently on ARM64 Windows, the low-level kernel device MMIO access
functions (like WRITE_REGISTER_ULONG) all have a DSB before the MMIO memory
access. That seems a little heavy handed to me, but it also may be that was
required to get all the current driver code written for AMD/Intel processors
to work correctly on ARM64 without adding barriers in the drivers. There are
also non-barrier variants that can be used if a driver wants to optimize
performance. Defaulting to correct operation with minimal code changes would
reduce the risk to delivery schedules.

Linux doesn't seem to make any attempt to have barriers in the low level
MMIO access functions. If Linux had chosen to do that on ARM64, this patch
would not have been required. For a low speed device like an i2c controller,
optimizing barriers likely make little difference in performance.
* AFAICS it does for the write(b|w|l|q)() accessors. See __dma_wb(),
* __io_bw() and __raw_write*() macros. The former one is converted
* to DMB.

Let's look at it from a risk analysis viewpoint. Say a DMB is sufficient and
we use the stronger DSB variant, the downside is a few cpu cycles will be
wasted in i2c transfers. Say we use a DMB when a DSB is required for correct
operation, the downside is i2c operations may malfunction. In this case,
using a few extra cpu cycles for an operation that does not happen at high
frequency is lower risk than failures in i2c transfers. If there is any
uncertainty in what barrier type to use, picking DSB over DMB would be
better. We determined from the include fragments above that wmb() give the
DSB and smp_wmb() does not.

Based on the above info, I think wmb() is still the correct function, and a
change to smp_wmb() would not be correct.

Sorry for the long message, I know some of you will be inspired to think
deeply about barriers, and some will be annoyed that I spent this much space
to explain how I came to the choice of wmb().
Thank you very much for the very-very-very detailed justification of
your point. I well understand why you insist on using the mandatory
barrier on your platform. The thing is that your patch concerns the
generic driver which is also executed on another archs. Thus we need
to be very careful with the barrier selection since it may cause
unpleasant side effects there. For instance some time ago I met a
problem with using memory barriers on the MMIO accesses on the MIPS
arch. Full mem access barrier caused the program execution stalling
for too long so it failed to fetch data from a device Rx FIFO on time.
FIFO got overrun, data got lost and communications were aborted with an
error returned. I am not saying that the same problem may happen here,
but just pointing out that selecting a correct barrier is important.

Since you are fixing a generic driver code we should make the
decisions based on the problem description and the barriers semantic
defined by the kernel. If for some reason the solution turns to be not
working, then it might as well indicate that the barrier isn't working
as expected by the kernel. Thorough studying the platform-specific
barrier implementation will be necessary then (what you've already
done).

Here is what you say regarding the found problem:

"Errors were happening in the ISR that looked like corrupted memory.
This was because memory writes from the core enabling interrupts were
not yet visible to the core running the ISR... Add a write barrier
before enabling interrupts to assure data written by the current core
is visible to all cores before the interrupt fires."

Based on that, I can infer that the problem is relevant for the
SMP-systems only and the root of it is in one CPU/core not seeing data
written by another CPU/core. Indeed adding a barrier shall fix it.
Seeing neither uni-processor systems nor any peripheral devices are
affected, SMP-conditional barrier shall be enough. Here is what [1]
says regarding the mandatory (mb/rmb/wmb) and SMP-conditional barriers
(smp_mb, smp_rmb, smp_wmb):

"Note that SMP memory barriers _must_ be used to control the ordering
of references to shared memory on SMP systems, though the use of
locking instead is sufficient. ... Mandatory barriers should not be
used to control SMP effects, since mandatory barriers impose
unnecessary overhead on both SMP and UP systems. They may, however, be
used to control MMIO effects on accesses through relaxed memory I/O
windows. ... SMP memory barriers are reduced to compiler barriers on
uniprocessor compiled systems because it is assumed that a CPU will
appear to be self-consistent, and will order overlapping accesses
correctly with respect to itself."

[1] "CPU MEMORY BARRIERS", Documentation/memory-barriers.txt

(note [1] also contains an example of using the smp_rmb()/smp_wmb()
barriers in a case similar to yours but involving two tasks instead of
a task and ISR)

Based on that description, the mandatory and SMP-conditional barriers
are supposed to similarly function when it comes to ordering the
shared memory accesses in the SMP systems. Meanwhile the former ones
cause additional overhead on UPs and MMIO which is out of the defined
problem scope.

Thus this also indicate that smp_wmb() is your choice here. But adding
it didn't solve the problem meanwhile using wmb() did. And here we are
getting to these barriers implementation on ARM64:
wmb() -> DSB
smp_wmb() -> DMB
Again I am not the ARM expert, but based on the text cited in your
message and what can be found in the Internet I can guess that DMB
doesn't guarantee the memory write _completion_, but instead make sure
that the accesses are just orderly executed on the core pipeline (for
instance just by fetching and dispatching these instructions within
different core cycles). The writes _completion_ is guaranteed by the
DSB barrier. Seeing in order to solve the problem you described all
the writes before the IRQ is raised _must_ be finished for sure to be
visible on another core executing an ISR, the barrier you need is DSB.

Unless I am mistaken in some aspects all of the considerations above
make me thinking that perhaps the smp_mb/smp_rmb/smp_wmb barriers
implementations on ARM64 are incorrect in using DMB and instead should
be converted to using DSB. Then you'll be able to freely utilize the
smp_wmb() barrier in the i2c-driver.

Catalin, Will could you please clarify whether what is stated above is
wrong or correct? Could you give your opinion regarding the issue
here?

Indeed I agree with all that's been said by Serge here.

I'm just adding some piece of information here to help understand the issue and then decide what's to be done.

* some ARM blog tips about when to use wmb() and smp_wmb() : https://community.arm.com/arm-community-blogs/b/architectures-and-processors-blog/posts/memory-access-ordering-part-2---barriers-and-the-linux-kernel

* some details about ARMv7 barrier instructions: isb, dmb, dsb: https://community.arm.com/arm-community-blogs/b/architectures-and-processors-blog/posts/memory-access-ordering-part-3---memory-access-ordering-in-the-arm-architecture

* The kernel doc about memory barriers, even if I guess everybody here knows this resource already: https://www.kernel.org/doc/Documentation/memory-barriers.txt

If I understand correctly what I've read in the 2nd link, indeed the DMB does not guarantee that the write *completes*. So if the write was for instance targeting DDR: it does not guarantee that the write reached the DDR before another core could be running the ISR and checks for the data.

*But*, it guarantees that "All data accesses by this processor/core before the DMB will be visible to all other masters within the specified shareability domain before any of the data accesses after it."

In other word (If I understand correctly): maybe it won't have reached the DDR yet *but* the cache coherency mechanism is done and all other cores would read the new data if they load at this address.

That seems to me to do the job for our use case.

The difference between DMB and DSB is that the DSB, on top of doing what the DMB does, stalls *all* instructions (and not just stores) until the synchronization mechanism is done.

That's my understanding but let's wait for the experts to enlighten us :)

Regards,

--

Yann