Re: [PATCH RFC v2 05/18] cxl/port: Add Dynamic Capacity mode support to endpoint decoders

[Fan Ni]

On Mon, Aug 28, 2023 at 10:20:56PM -0700, Ira Weiny wrote:
> Endpoint decoders used to map Dynamic Capacity must be configured to
> point to the correct Dynamic Capacity (DC) Region.  The decoder mode
> currently represents the partition the decoder points to such as ram or
> pmem.
>
> Expand the mode to include DC Regions.
>
> Co-developed-by: Navneet Singh <navneet.singh@xxxxxxxxx>
> Signed-off-by: Navneet Singh <navneet.singh@xxxxxxxxx>
> Signed-off-by: Ira Weiny <ira.weiny@xxxxxxxxx>
>

I have the same question about how dc_mode_to_region_index is
implemented and used as Jonathan.

Nice to see the code spit out, it is easier to review now.

Fan

> ---
> Changes for v2:
> [iweiny: split from region creation patch]
> ---
>  Documentation/ABI/testing/sysfs-bus-cxl | 19 ++++++++++---------
>  drivers/cxl/core/hdm.c                  | 24 ++++++++++++++++++++++++
>  drivers/cxl/core/port.c                 | 16 ++++++++++++++++
>  3 files changed, 50 insertions(+), 9 deletions(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl
> index 6350dd82b9a9..2268ffcdb604 100644
> --- a/Documentation/ABI/testing/sysfs-bus-cxl
> +++ b/Documentation/ABI/testing/sysfs-bus-cxl
> @@ -257,22 +257,23 @@ Description:
>
>  What:		/sys/bus/cxl/devices/decoderX.Y/mode
>  Date:		May, 2022
> -KernelVersion:	v6.0
> +KernelVersion:	v6.0, v6.6 (dcY)
>  Contact:	linux-cxl@xxxxxxxxxxxxxxx
>  Description:
>  		(RW) When a CXL decoder is of devtype "cxl_decoder_endpoint" it
>  		translates from a host physical address range, to a device local
>  		address range. Device-local address ranges are further split
> -		into a 'ram' (volatile memory) range and 'pmem' (persistent
> -		memory) range. The 'mode' attribute emits one of 'ram', 'pmem',
> -		'mixed', or 'none'. The 'mixed' indication is for error cases
> -		when a decoder straddles the volatile/persistent partition
> -		boundary, and 'none' indicates the decoder is not actively
> -		decoding, or no DPA allocation policy has been set.
> +		into a 'ram' (volatile memory) range, 'pmem' (persistent
> +		memory) range, or Dynamic Capacity (DC) range. The 'mode'
> +		attribute emits one of 'ram', 'pmem', 'dcY', 'mixed', or
> +		'none'. The 'mixed' indication is for error cases when a
> +		decoder straddles the volatile/persistent partition boundary,
> +		and 'none' indicates the decoder is not actively decoding, or
> +		no DPA allocation policy has been set.
>
>  		'mode' can be written, when the decoder is in the 'disabled'
> -		state, with either 'ram' or 'pmem' to set the boundaries for the
> -		next allocation.
> +		state, with 'ram', 'pmem', or 'dcY' to set the boundaries for
> +		the next allocation.
>
>
>  What:		/sys/bus/cxl/devices/decoderX.Y/dpa_resource
> diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c
> index a254f79dd4e8..3f4af1f5fac8 100644
> --- a/drivers/cxl/core/hdm.c
> +++ b/drivers/cxl/core/hdm.c
> @@ -267,6 +267,19 @@ static void devm_cxl_dpa_release(struct cxl_endpoint_decoder *cxled)
>  	__cxl_dpa_release(cxled);
>  }
>
> +static int dc_mode_to_region_index(enum cxl_decoder_mode mode)
> +{
> +	int index = 0;
> +
> +	for (int i = CXL_DECODER_DC0; i <= CXL_DECODER_DC7; i++) {
> +		if (mode == i)
> +			return index;
> +		index++;
> +	}
> +
> +	return -EINVAL;
> +}
> +
>  static int __cxl_dpa_reserve(struct cxl_endpoint_decoder *cxled,
>  			     resource_size_t base, resource_size_t len,
>  			     resource_size_t skipped)
> @@ -429,6 +442,7 @@ int cxl_dpa_set_mode(struct cxl_endpoint_decoder *cxled,
>  	switch (mode) {
>  	case CXL_DECODER_RAM:
>  	case CXL_DECODER_PMEM:
> +	case CXL_DECODER_DC0 ... CXL_DECODER_DC7:
>  		break;
>  	default:
>  		dev_dbg(dev, "unsupported mode: %d\n", mode);
> @@ -456,6 +470,16 @@ int cxl_dpa_set_mode(struct cxl_endpoint_decoder *cxled,
>  		goto out;
>  	}
>
> +	for (int i = CXL_DECODER_DC0; i <= CXL_DECODER_DC7; i++) {
> +		int index = dc_mode_to_region_index(i);
> +
> +		if (mode == i && !resource_size(&cxlds->dc_res[index])) {
> +			dev_dbg(dev, "no available dynamic capacity\n");
> +			rc = -ENXIO;
> +			goto out;
> +		}
> +	}
> +
>  	cxled->mode = mode;
>  	rc = 0;
>  out:
> diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
> index f58cf01f8d2c..ce4a66865db3 100644
> --- a/drivers/cxl/core/port.c
> +++ b/drivers/cxl/core/port.c
> @@ -197,6 +197,22 @@ static ssize_t mode_store(struct device *dev, struct device_attribute *attr,
>  		mode = CXL_DECODER_PMEM;
>  	else if (sysfs_streq(buf, "ram"))
>  		mode = CXL_DECODER_RAM;
> +	else if (sysfs_streq(buf, "dc0"))
> +		mode = CXL_DECODER_DC0;
> +	else if (sysfs_streq(buf, "dc1"))
> +		mode = CXL_DECODER_DC1;
> +	else if (sysfs_streq(buf, "dc2"))
> +		mode = CXL_DECODER_DC2;
> +	else if (sysfs_streq(buf, "dc3"))
> +		mode = CXL_DECODER_DC3;
> +	else if (sysfs_streq(buf, "dc4"))
> +		mode = CXL_DECODER_DC4;
> +	else if (sysfs_streq(buf, "dc5"))
> +		mode = CXL_DECODER_DC5;
> +	else if (sysfs_streq(buf, "dc6"))
> +		mode = CXL_DECODER_DC6;
> +	else if (sysfs_streq(buf, "dc7"))
> +		mode = CXL_DECODER_DC7;
>  	else
>  		return -EINVAL;
>
>
> --
> 2.41.0
>