Re: [PATCH] lkdtm/bugs: add test for panic() with stuck secondary CPUs

From: Sumit Garg
Date: Thu Aug 31 2023 - 08:45:45 EST


Hi Mark,

Thanks for putting up a test case for this.

On Thu, 31 Aug 2023 at 15:40, Mark Rutland <mark.rutland@xxxxxxx> wrote:
>
> Upon a panic() the kernel will use either smp_send_stop() or
> crash_smp_send_stop() to attempt to stop secondary CPUs via an IPI,
> which may or may not be an NMI. Generally it's preferable that this is an
> NMI so that CPUs can be stopped in as many situations as possible, but
> it's not always possible to provide an NMI, and there are cases where
> CPUs may be unable to handle the NMI regardless.
>
> This patch adds a test for panic() where all other CPUs are stuck with
> interrupts disabled, which can be used to check whether the kernel
> gracefully handles CPUs failing to respond to a stop, and whe NMIs stops

s/whe/when/

> work.
>
> For example, on arm64 *without* an NMI, this results in:
>
> | # echo PANIC_STOP_IRQOFF > /sys/kernel/debug/provoke-crash/DIRECT
> | lkdtm: Performing direct entry PANIC_STOP_IRQOFF
> | Kernel panic - not syncing: panic stop irqoff test
> | CPU: 2 PID: 24 Comm: migration/2 Not tainted 6.5.0-rc3-00077-ge6c782389895-dirty #4
> | Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
> | Stopper: multi_cpu_stop+0x0/0x1a0 <- stop_machine_cpuslocked+0x158/0x1a4
> | Call trace:
> | dump_backtrace+0x94/0xec
> | show_stack+0x18/0x24
> | dump_stack_lvl+0x74/0xc0
> | dump_stack+0x18/0x24
> | panic+0x358/0x3e8
> | lkdtm_PANIC+0x0/0x18
> | multi_cpu_stop+0x9c/0x1a0
> | cpu_stopper_thread+0x84/0x118
> | smpboot_thread_fn+0x224/0x248
> | kthread+0x114/0x118
> | ret_from_fork+0x10/0x20
> | SMP: stopping secondary CPUs
> | SMP: failed to stop secondary CPUs 0-3
> | Kernel Offset: 0x401cf3490000 from 0xffff800080000000
> | PHYS_OFFSET: 0x40000000
> | CPU features: 0x00000000,68c167a1,cce6773f
> | Memory Limit: none
> | ---[ end Kernel panic - not syncing: panic stop irqoff test ]---
>
> On arm64 *with* an NMI, this results in:

I suppose a more interesting test scenario to show difference among
NMI stop IPI and regular stop IPI would be:

- First put any CPU into hard lockup state via:
$ echo HARDLOCKUP > /sys/kernel/debug/provoke-crash/DIRECT

- And then provoke following from other CPU:
$ echo PANIC_STOP_IRQOFF > /sys/kernel/debug/provoke-crash/DIRECT

>
> | # echo PANIC_STOP_IRQOFF > /sys/kernel/debug/provoke-crash/DIRECT
> | lkdtm: Performing direct entry PANIC_STOP_IRQOFF
> | Kernel panic - not syncing: panic stop irqoff test
> | CPU: 1 PID: 19 Comm: migration/1 Not tainted 6.5.0-rc3-00077-ge6c782389895-dirty #4
> | Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
> | Stopper: multi_cpu_stop+0x0/0x1a0 <- stop_machine_cpuslocked+0x158/0x1a4
> | Call trace:
> | dump_backtrace+0x94/0xec
> | show_stack+0x18/0x24
> | dump_stack_lvl+0x74/0xc0
> | dump_stack+0x18/0x24
> | panic+0x358/0x3e8
> | lkdtm_PANIC+0x0/0x18
> | multi_cpu_stop+0x9c/0x1a0
> | cpu_stopper_thread+0x84/0x118
> | smpboot_thread_fn+0x224/0x248
> | kthread+0x114/0x118
> | ret_from_fork+0x10/0x20
> | SMP: stopping secondary CPUs
> | Kernel Offset: 0x55a9c0bc0000 from 0xffff800080000000
> | PHYS_OFFSET: 0x40000000
> | CPU features: 0x00000000,68c167a1,fce6773f
> | Memory Limit: none
> | ---[ end Kernel panic - not syncing: panic stop irqoff test ]---
>
> Signed-off-by: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: Douglas Anderson <dianders@xxxxxxxxxxxx>
> Cc: Kees Cook <keescook@xxxxxxxxxxxx>
> Cc: Stephen Boyd <swboyd@xxxxxxxxxxxx
> Cc: Sumit Garg <sumit.garg@xxxxxxxxxx>
> ---
> drivers/misc/lkdtm/bugs.c | 29 ++++++++++++++++++++++++++++-
> 1 file changed, 28 insertions(+), 1 deletion(-)
>
> I've tested this with the arm64 NMI IPI patches:
>
> https://lore.kernel.org/linux-arm-kernel/20230830191314.1618136-1-dianders@xxxxxxxxxxxx/
>
> Specifically, with the patch that uses an NMI for IPI_CPU_STOP and
> IPI_CPU_CRASH_STOP:
>
> https://lore.kernel.org/linux-arm-kernel/20230830121115.v12.5.Ifadbfd45b22c52edcb499034dd4783d096343260@changeid/
>
> Mark.
>
> diff --git a/drivers/misc/lkdtm/bugs.c b/drivers/misc/lkdtm/bugs.c
> index 3c95600ab2f71..368da8b83cd1c 100644
> --- a/drivers/misc/lkdtm/bugs.c
> +++ b/drivers/misc/lkdtm/bugs.c
> @@ -6,12 +6,14 @@
> * test source files.
> */
> #include "lkdtm.h"
> +#include <linux/cpu.h>
> #include <linux/list.h>
> #include <linux/sched.h>
> #include <linux/sched/signal.h>
> #include <linux/sched/task_stack.h>
> -#include <linux/uaccess.h>
> #include <linux/slab.h>
> +#include <linux/stop_machine.h>
> +#include <linux/uaccess.h>
>
> #if IS_ENABLED(CONFIG_X86_32) && !IS_ENABLED(CONFIG_UML)
> #include <asm/desc.h>
> @@ -73,6 +75,30 @@ static void lkdtm_PANIC(void)
> panic("dumptest");
> }
>
> +static int panic_stop_irqoff_fn(void *arg)
> +{
> + atomic_t *v = arg;
> +
> + /*
> + * Trigger the panic after all other CPUs have entered this function,
> + * so that they are guaranteed to have IRQs disabled.
> + */
> + if (atomic_inc_return(v) == num_online_cpus())
> + panic("panic stop irqoff test");
> +
> + for (;;)
> + cpu_relax();
> +}
> +
> +static void lkdtm_PANIC_STOP_IRQOFF(void)
> +{
> + atomic_t v = ATOMIC_INIT(0);
> +
> + cpus_read_lock();
> + stop_machine(panic_stop_irqoff_fn, &v, cpu_online_mask);
> + cpus_read_unlock();

stop_machine() does internally use cpus_read_{lock/unlock}(), is there
any need to have them here as well?

-Sumit

> +}
> +
> static void lkdtm_BUG(void)
> {
> BUG();
> @@ -598,6 +624,7 @@ static noinline void lkdtm_CORRUPT_PAC(void)
>
> static struct crashtype crashtypes[] = {
> CRASHTYPE(PANIC),
> + CRASHTYPE(PANIC_STOP_IRQOFF),
> CRASHTYPE(BUG),
> CRASHTYPE(WARNING),
> CRASHTYPE(WARNING_MESSAGE),
> --
> 2.30.2
>