Re: [PATCH V10 11/23] mmc: sdhci-uhs2: add set_power() to support vdd2

From: Adrian Hunter
Date: Thu Aug 31 2023 - 04:27:05 EST


On 18/08/23 13:02, Victor Shih wrote:
> From: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>
>
> This is a UHS-II version of sdhci's set_power operation. VDD2, as
> well as VDD, is handled here.
>
> Signed-off-by: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi@xxxxxxxxxx>
> Signed-off-by: Victor Shih <victor.shih@xxxxxxxxxxxxxxxxxxx>

Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>

> ---
>
> Updates in V10: - Move some definitions of PatchV9[05/23] to
> PatchV10[11/23].
>
> Updates in V9: - Modify annotations in sdhci_get_vdd_value().
>
> Updates in V8: - Adjust the position of matching brackets. - Add the
> initial value of the pwr in sdhci_uhs2_set_power().
>
> Updates in V7: - Add clear the power reg before setting a new value
> in sdhci_uhs2_set_power(). - Add MMC_VDD_34_35 case and MMC_VDD_35_36
> case in sdhci_get_vdd_value(). - Drop pwr variable in
> sdhci_get_vdd_value().
>
> Updates in V6: - Add mmc_opt_regulator_set_ocr(). - Remove
> unnecessary functions.
>
> ---
>
> drivers/mmc/host/sdhci-uhs2.c | 48 +++++++++++++++++++++++++++
> drivers/mmc/host/sdhci.c | 61
> +++++++++++++++++++---------------- drivers/mmc/host/sdhci.h |
> 1 + include/linux/mmc/host.h | 1 + 4 files changed, 83
> insertions(+), 28 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-uhs2.c
> b/drivers/mmc/host/sdhci-uhs2.c index dfc80a7f1bad..fc37a34629c2
> 100644 --- a/drivers/mmc/host/sdhci-uhs2.c +++
> b/drivers/mmc/host/sdhci-uhs2.c @@ -57,6 +57,13 @@
> EXPORT_SYMBOL_GPL(sdhci_uhs2_dump_regs); *
> *
> \*****************************************************************************/
>
> +static inline int mmc_opt_regulator_set_ocr(struct mmc_host *mmc, +
> struct regulator *supply, + unsigned short vdd_bit) +{ +
> return IS_ERR_OR_NULL(supply) ? 0 : mmc_regulator_set_ocr(mmc,
> supply, vdd_bit); +} + bool sdhci_uhs2_mode(struct sdhci_host *host)
> { return host->mmc->flags & MMC_UHS2_SUPPORT; @@ -94,6 +101,47 @@
> void sdhci_uhs2_reset(struct sdhci_host *host, u16 mask) }
> EXPORT_SYMBOL_GPL(sdhci_uhs2_reset);
>
> +static void sdhci_uhs2_set_power(struct sdhci_host *host, unsigned
> char mode, unsigned short vdd) +{ + struct mmc_host *mmc =
> host->mmc; + u8 pwr = 0; + + if (mode != MMC_POWER_OFF) { + pwr =
> sdhci_get_vdd_value(vdd); + if (!pwr) + WARN(1, "%s: Invalid vdd
> %#x\n", + mmc_hostname(host->mmc), vdd); + pwr |=
> SDHCI_VDD2_POWER_180; + } + + if (host->pwr == pwr) + return; +
> host->pwr = pwr; + + if (pwr == 0) { + sdhci_writeb(host, 0,
> SDHCI_POWER_CONTROL); + + mmc_opt_regulator_set_ocr(mmc,
> mmc->supply.vmmc, 0); + mmc_opt_regulator_set_ocr(mmc,
> mmc->supply.vmmc2, 0); + } else { + mmc_opt_regulator_set_ocr(mmc,
> mmc->supply.vmmc, vdd); + /* support 1.8v only for now */ +
> mmc_opt_regulator_set_ocr(mmc, mmc->supply.vmmc2,
> fls(MMC_VDD_165_195) - 1); + + /* Clear the power reg before setting
> a new value */ + sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); + + /*
> vdd first */ + pwr |= SDHCI_POWER_ON; + sdhci_writeb(host, pwr &
> 0xf, SDHCI_POWER_CONTROL); + mdelay(5); + + pwr |=
> SDHCI_VDD2_POWER_ON; + sdhci_writeb(host, pwr,
> SDHCI_POWER_CONTROL); + mdelay(5); + } +} +
> /*****************************************************************************\
>
>
* *
> * Driver init/exit
> * diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 753b251179f2..eca54a16e7fc 100644 ---
> a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -23,7
> +23,7 @@ #include <linux/regulator/consumer.h> #include
> <linux/pm_runtime.h> #include <linux/of.h> - +#include <linux/bug.h>
> #include <linux/leds.h>
>
> #include <linux/mmc/mmc.h> @@ -2061,41 +2061,46 @@ static void
> sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode,
> sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); }
>
> +unsigned short sdhci_get_vdd_value(unsigned short vdd) +{ + switch
> (1 << vdd) { + case MMC_VDD_165_195: + /* + * Without a regulator,
> SDHCI does not support 2.0v + * so we only get here if the driver
> deliberately + * added the 2.0v range to ocr_avail. Map it to 1.8v +
> * for the purpose of turning on the power. + */ + case
> MMC_VDD_20_21: + return SDHCI_POWER_180; + case MMC_VDD_29_30: +
> case MMC_VDD_30_31: + return SDHCI_POWER_300; + case MMC_VDD_32_33:
> + case MMC_VDD_33_34: + /* + * 3.4V ~ 3.6V are valid only for those
> platforms where it's + * known that the voltage range is supported
> by hardware. + */ + case MMC_VDD_34_35: + case MMC_VDD_35_36: +
> return SDHCI_POWER_330; + default: + return 0; + } +}
> +EXPORT_SYMBOL_GPL(sdhci_get_vdd_value); + void
> sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
> unsigned short vdd) { u8 pwr = 0;
>
> if (mode != MMC_POWER_OFF) { - switch (1 << vdd) { - case
> MMC_VDD_165_195: - /* - * Without a regulator, SDHCI does not
> support 2.0v - * so we only get here if the driver deliberately -
> * added the 2.0v range to ocr_avail. Map it to 1.8v - * for the
> purpose of turning on the power. - */ - case MMC_VDD_20_21: -
> pwr = SDHCI_POWER_180; - break; - case MMC_VDD_29_30: - case
> MMC_VDD_30_31: - pwr = SDHCI_POWER_300; - break; - case
> MMC_VDD_32_33: - case MMC_VDD_33_34: - /* - * 3.4 ~ 3.6V are
> valid only for those platforms where it's - * known that the
> voltage range is supported by hardware. - */ - case
> MMC_VDD_34_35: - case MMC_VDD_35_36: - pwr = SDHCI_POWER_330; -
> break; - default: + pwr = sdhci_get_vdd_value(vdd); + if (!pwr) {
> WARN(1, "%s: Invalid vdd %#x\n", mmc_hostname(host->mmc), vdd); -
> break; } }
>
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 43ad3f4b7672..f3bd558b337f 100644 ---
> a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -837,6
> +837,7 @@ void sdhci_set_power(struct sdhci_host *host, unsigned char
> mode, void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,
> unsigned char mode, unsigned short vdd); +unsigned short
> sdhci_get_vdd_value(unsigned short vdd); void
> sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
> unsigned short vdd); int sdhci_get_cd_nogpio(struct mmc_host *mmc);
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index e38c45392079..1eba64228725 100644 ---
> a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -357,6
> +357,7 @@ struct mmc_pwrseq;
>
> struct mmc_supply { struct regulator *vmmc; /* Card power supply */
> + struct regulator *vmmc2; /* UHS2 VDD2 power supply */ struct
> regulator *vqmmc; /* Optional Vccq supply */ struct regulator
> *vqmmc2; /* Optional supply for phy */ };