Re: [PATCH v14 3/9] dt-bindings: soc: qcom: cpr3: Add bindings for CPR3 driver

From: Ulf Hansson
Date: Tue Aug 29 2023 - 07:03:31 EST


On Mon, 28 Aug 2023 at 13:42, Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:
>
> From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
>
> Add the bindings for the CPR3 driver to the documentation.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
> [Konrad: Make binding check pass; update AGdR's email]
> Tested-by: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> ---
> .../devicetree/bindings/soc/qcom/qcom,cpr3.yaml | 286 +++++++++++++++++++++
> 1 file changed, 286 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,cpr3.yaml
> new file mode 100644
> index 000000000000..acf2e294866b

[...]

> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,gcc-msm8998.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + compatible = "qcom,kryo280";
> + device_type = "cpu";
> + reg = <0x0 0x0>;
> + operating-points-v2 = <&cpu0_opp_table>;
> + power-domains = <&apc_cprh 0>;
> + power-domain-names = "cprh";

Rather than using a Qcom specific power-domain-name, perhaps a common
power-domain-name for cpus, that can be used for "the performance
domain" would be a good idea here?

I have suggested using "perf" for the SCMI performance domain [1],
perhaps that description should be extended to cover this and other
performance domains too?

> + };
> +
> + cpu@100 {
> + compatible = "qcom,kryo280";
> + device_type = "cpu";
> + reg = <0x0 0x100>;
> + operating-points-v2 = <&cpu4_opp_table>;
> + power-domains = <&apc_cprh 1>;
> + power-domain-names = "cprh";
> + };
> + };

[...]

Kind regards
Uffe

[1]
https://lore.kernel.org/linux-arm-kernel/20230825112633.236607-9-ulf.hansson@xxxxxxxxxx/