selftests: net: pmtu.sh: Unable to handle kernel paging request at virtual address

[Naresh Kamboju]

The selftests: net: pmtu.sh running on Linux next got this kernel panic on
qemu-arm64.


logs:
====
[    0.000000] Linux version 6.5.0 (tuxmake@tuxmake) (Debian clang
version 18.0.0 (++20230822112105+841c4dc7e51e-1~exp1~20230822112223.851),
Debian LLD 18.0.0) #1 SMP PREEMPT @1693176139

...
# selftests: net: pmtu.sh
# TEST: ipv4: PMTU exceptions                                         [ OK ]
# TEST: ipv4: PMTU exceptions - nexthop objects                       [ OK ]
# TEST: ipv6: PMTU exceptions                                         [ OK ]
# TEST: ipv6: PMTU exceptions - nexthop objects                       [ OK ]

...

# TEST: vti4: PMTU exceptions, routed (ESP-in-UDP)                    [FAIL]
#   PMTU exception wasn't created after exceeding PMTU (IP payload length 1438)
# ./pmtu.sh: 938: kill: No such process
#
# ./pmtu.sh: 938: kill: No such process
#
<47>[  366.411270] systemd-journald[84]: Sent WATCHDOG=1 notification.
# TEST: vti4: default MTU assignment                                  [ OK ]
# TEST: vti6: default MTU assignment                                  [ OK ]
# TEST: vti4: MTU setting on link creation                            [ OK ]
# TEST: vti6: MTU setting on link creation                            [ OK ]
# TEST: vti6: MTU changes on link changes                             [ OK ]
# TEST: ipv4: cleanup of cached exceptions                            [ OK ]
# TEST: ipv4: cleanup of cached exceptions - nexthop objects          [ OK ]
# TEST: ipv6: cleanup of cached exceptions                            [ OK ]
# TEST: ipv6: cleanup of cached exceptions - nexthop objects          [ OK ]
<1>[  398.987591] Unable to handle kernel paging request at virtual
address ffff5dbb8189f000
<1>[  398.988469] Mem abort info:
<1>[  398.988712]   ESR = 0x0000000097b58004
<1>[  398.989264]   EC = 0x25: DABT (current EL), IL = 32 bits
<1>[  398.989893]   SET = 0, FnV = 0
<1>[  398.990312]   EA = 0, S1PTW = 0
<1>[  398.990768]   FSC = 0x04: level 0 translation fault
<1>[  398.992330] Data abort info:
<1>[  398.992591]   Access size = 4 byte(s)
<1>[  398.992811]   SSE = 1, SRT = 21
<1>[  398.993008]   SF = 1, AR = 0
<1>[  398.993243]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
<1>[  398.993601]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
<1>[  398.994094] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041d49000
<1>[  398.994603] [ffff5dbb8189f000] pgd=0000000000000000, p4d=0000000000000000
<0>[  398.995464] Internal error: Oops: 0000000097b58004 [#1] PREEMPT SMP
<4>[  398.996177] Modules linked in: fou6 sit fou bridge stp llc vxlan
ip6_udp_tunnel udp_tunnel act_csum libcrc32c act_pedit cls_flower
sch_prio veth vrf macvtap macvlan tap crct10dif_ce sm3_ce sm3 sha3_ce
sha512_ce sha512_arm64 fuse drm dm_mod ip_tables x_tables [last
unloaded: test_blackhole_dev]
<4>[  398.999384] CPU: 1 PID: 132 Comm: kworker/u4:3 Not tainted 6.5.0 #1
<4>[  399.000045] Hardware name: linux,dummy-virt (DT)
<4>[  399.001079] Workqueue: netns cleanup_net
<4>[  399.002441] pstate: 824000c9 (Nzcv daIF +PAN -UAO +TCO -DIT
-SSBS BTYPE=--)
<4>[  399.003881] pc : percpu_counter_add_batch+0x28/0xd0
<4>[  399.004637] lr : dst_destroy+0x44/0x1e4
<4>[  399.004904] sp : ffff80008000be70
<4>[  399.005864] x29: ffff80008000be70 x28: ffffa2457df6ea40 x27:
ffffa2457df24008
<4>[  399.006586] x26: ffffa2457dffa000 x25: 000000000000000a x24:
0000000000000002
<4>[  399.007360] x23: 0000000000000000 x22: 000000000000000a x21:
ffff0000c0e90ec0
<4>[  399.008276] x20: 0000000000000000 x19: ffff0000c4f83440 x18:
0000000000000000
<4>[  399.009327] x17: ffff5dbb8189f000 x16: ffff800080008000 x15:
0000000000000010
<4>[  399.009653] x14: 0000000000000010 x13: 0000000000000004 x12:
0000000000000701
<4>[  399.010159] x11: 0000000000000001 x10: fffffc00030c7260 x9 :
ffff5dbb8189f000
<4>[  399.010742] x8 : 0000000000000000 x7 : 7f7f7f7f7f7f7f7f x6 :
fefefefefefefeff
<4>[  399.012056] x5 : 000000000010000e x4 : fffffc00030c7260 x3 :
000000000010000e
<4>[  399.013082] x2 : 0000000000000020 x1 : ffffffffffffffff x0 :
ffff0000c4f83440
<4>[  399.014716] Call trace:
<4>[  399.015702]  percpu_counter_add_batch+0x28/0xd0
<4>[  399.016399]  dst_destroy+0x44/0x1e4
<4>[  399.016681]  dst_destroy_rcu+0x14/0x20
<4>[  399.017009]  rcu_core+0x2d0/0x5e0
<4>[  399.017311]  rcu_core_si+0x10/0x1c
<4>[  399.017609]  __do_softirq+0xd4/0x23c
<4>[  399.017991]  ____do_softirq+0x10/0x1c
<4>[  399.018320]  call_on_irq_stack+0x24/0x4c
<4>[  399.018723]  do_softirq_own_stack+0x1c/0x28
<4>[  399.022639]  __irq_exit_rcu+0x6c/0xcc
<4>[  399.023434]  irq_exit_rcu+0x10/0x1c
<4>[  399.023962]  el1_interrupt+0x8c/0xc0
<4>[  399.024810]  el1h_64_irq_handler+0x18/0x24
<4>[  399.025324]  el1h_64_irq+0x64/0x68
<4>[  399.025612]  _raw_spin_lock_bh+0x0/0x6c
<4>[  399.026102]  cleanup_net+0x280/0x45c
<4>[  399.026403]  process_one_work+0x1d4/0x310
<4>[  399.027140]  worker_thread+0x248/0x470
<4>[  399.027621]  kthread+0xfc/0x184
<4>[  399.028068]  ret_from_fork+0x10/0x20
<0>[  399.029333] Code: d50343df aa0003f3 f9401008 d53cd049 (b8a86935)
<4>[  399.030578] ---[ end trace 0000000000000000 ]---
<0>[  399.031422] Kernel panic - not syncing: Oops: Fatal exception in interrupt
<2>[  399.032320] SMP: stopping secondary CPUs
<0>[  399.033487] Kernel Offset: 0x2244fc200000 from 0xffff800080000000
<0>[  399.033819] PHYS_OFFSET: 0x40000000
<0>[  399.034096] CPU features: 0x00000000,68f167a1,ccc6773f
<0>[  399.034779] Memory Limit: none
<0>[  399.035768] ---[ end Kernel panic - not syncing: Oops: Fatal
exception in interrupt ]---

Links:
 - https://qa-reports.linaro.org/lkft/linux-mainline-master/build/v6.5/testrun/19373075/suite/log-parser-test/test/check-kernel-oops/log
 - https://qa-reports.linaro.org/lkft/linux-mainline-master/build/v6.5/testrun/19373075/suite/log-parser-test/tests/
 -   https://storage.tuxsuite.com/public/linaro/lkft/builds/2UaRggcJ0lNsDMIbbFaiyz3Qwsi/

Steps to reproduce:
===================
#
# To install tuxrun to your home directory at ~/.local/bin:
# pip3 install -U --user tuxrun==0.48.0
#
# Or install a deb/rpm depending on the running distribution
# See https://tuxmake.org/install-deb/ or
# https://tuxmake.org/install-rpm/
#
# See https://tuxrun.org/ for complete documentation.
#
# Please follow the additional instructions if the tests are related to FVP:
# https://tuxrun.org/run-fvp/
#

tuxrun --runtime podman --device qemu-arm64 --boot-args rw --kernel
https://storage.tuxsuite.com/public/linaro/lkft/builds/2UaRggcJ0lNsDMIbbFaiyz3Qwsi/Image.gz
--modules https://storage.tuxsuite.com/public/linaro/lkft/builds/2UaRggcJ0lNsDMIbbFaiyz3Qwsi/modules.tar.xz
--rootfs https://storage.tuxboot.com/debian/bookworm/arm64/rootfs.ext4.xz
--parameters SHARD_INDEX=1 --parameters SKIPFILE=skipfile-lkft.yaml
--parameters SHARD_NUMBER=5 --parameters
KSELFTEST=https://storage.tuxsuite.com/public/linaro/lkft/builds/2UaRggcJ0lNsDMIbbFaiyz3Qwsi/kselftest.tar.xz
--image docker.io/linaro/tuxrun-dispatcher:v0.48.0 --tests
kselftest-net --timeouts boot=30 kselftest-net=30


--
Linaro LKFT
https://lkft.linaro.org