[PATCH 0/7] Add support for IPQ5018 tsens

[Sricharan Ramabadhran]

IPQ5018 has tsens V1.0 IP with 4 sensors and 1 interrupt.
There is no RPM present in the soc to do tsens early enable.
Adding support for the same here.

Sricharan Ramabadhran (7):
  dt-bindings: thermal: qcom-tsens: Add ipq5018 compatible
  thermal/drivers/qcom: Add new feat for soc without rpm
  thermal/drivers/qcom/tsens: Add support for IPQ5018 tsens.
  thermal/drivers/qcom: Add IPQ5018 compatible.
  dt-bindings: nvmem: Add compatible for IPQ5018
  arm64: dts: qcom: ipq5018: Add tsens node
  arm64: dts: qcom: ipq5018: Add thermal zones

 .../bindings/nvmem/qcom,qfprom.yaml           |   1 +
 .../bindings/thermal/qcom-tsens.yaml          |  19 +++
 arch/arm64/boot/dts/qcom/ipq5018.dtsi         |  81 ++++++++++++
 drivers/thermal/qcom/tsens-v1.c               | 115 ++++++++++++++++++
 drivers/thermal/qcom/tsens.c                  |   5 +-
 drivers/thermal/qcom/tsens.h                  |   5 +-
 6 files changed, 224 insertions(+), 2 deletions(-)

-- 
2.34.1