[RESEND PATCH v6 3/3] input: pm8xxx-vibrator: add new SPMI vibrator support

From: Fenglin Wu
Date: Mon Aug 28 2023 - 01:34:06 EST


Add new SPMI vibrator module which is very similar to the SPMI vibrator
module inside PM8916 but just has a finer drive voltage step (1mV vs
100mV) hence its drive level control is expanded to across 2 registers.
The vibrator module can be found in Qualcomm PMIC PMI632, then following
PM7250B, PM7325B, PM7550BA PMICs.

Signed-off-by: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
Tested-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx> # sdm632-fairphone-fp3 (pmi632)
---
drivers/input/misc/pm8xxx-vibrator.c | 55 +++++++++++++++++++++++++---
1 file changed, 50 insertions(+), 5 deletions(-)

diff --git a/drivers/input/misc/pm8xxx-vibrator.c b/drivers/input/misc/pm8xxx-vibrator.c
index d6b468324c77..990e8a9ac018 100644
--- a/drivers/input/misc/pm8xxx-vibrator.c
+++ b/drivers/input/misc/pm8xxx-vibrator.c
@@ -21,6 +21,13 @@
#define SPMI_VIB_DRV_LEVEL_MASK GENMASK(4, 0)
#define SPMI_VIB_DRV_SHIFT 0

+#define SPMI_VIB_GEN2_DRV_REG 0x40
+#define SPMI_VIB_GEN2_DRV_MASK GENMASK(7, 0)
+#define SPMI_VIB_GEN2_DRV_SHIFT 0
+#define SPMI_VIB_GEN2_DRV2_REG 0x41
+#define SPMI_VIB_GEN2_DRV2_MASK GENMASK(3, 0)
+#define SPMI_VIB_GEN2_DRV2_SHIFT 8
+
#define SPMI_VIB_EN_REG 0x46
#define SPMI_VIB_EN_BIT BIT(7)

@@ -33,12 +40,14 @@
enum vib_hw_type {
SSBI_VIB,
SPMI_VIB,
+ SPMI_VIB_GEN2
};

struct pm8xxx_vib_data {
enum vib_hw_type hw_type;
unsigned int enable_addr;
unsigned int drv_addr;
+ unsigned int drv2_addr;
};

static const struct pm8xxx_vib_data ssbi_vib_data = {
@@ -52,6 +61,13 @@ static const struct pm8xxx_vib_data spmi_vib_data = {
.drv_addr = SPMI_VIB_DRV_REG,
};

+static const struct pm8xxx_vib_data spmi_vib_gen2_data = {
+ .hw_type = SPMI_VIB_GEN2,
+ .enable_addr = SPMI_VIB_EN_REG,
+ .drv_addr = SPMI_VIB_GEN2_DRV_REG,
+ .drv2_addr = SPMI_VIB_GEN2_DRV2_REG,
+};
+
/**
* struct pm8xxx_vib - structure to hold vibrator data
* @vib_input_dev: input device supporting force feedback
@@ -85,12 +101,24 @@ static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on)
{
int rc;
unsigned int val = vib->reg_vib_drv;
- u32 mask = SPMI_VIB_DRV_LEVEL_MASK;
- u32 shift = SPMI_VIB_DRV_SHIFT;
+ u32 mask, shift;

- if (vib->data->hw_type == SSBI_VIB) {
+
+ switch (vib->data->hw_type) {
+ case SSBI_VIB:
mask = SSBI_VIB_DRV_LEVEL_MASK;
shift = SSBI_VIB_DRV_SHIFT;
+ break;
+ case SPMI_VIB:
+ mask = SPMI_VIB_DRV_LEVEL_MASK;
+ shift = SPMI_VIB_DRV_SHIFT;
+ break;
+ case SPMI_VIB_GEN2:
+ mask = SPMI_VIB_GEN2_DRV_MASK;
+ shift = SPMI_VIB_GEN2_DRV_SHIFT;
+ break;
+ default:
+ return -EINVAL;
}

if (on)
@@ -104,6 +132,19 @@ static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on)

vib->reg_vib_drv = val;

+ if (vib->data->hw_type == SPMI_VIB_GEN2) {
+ mask = SPMI_VIB_GEN2_DRV2_MASK;
+ shift = SPMI_VIB_GEN2_DRV2_SHIFT;
+ if (on)
+ val = (vib->level >> shift) & mask;
+ else
+ val = 0;
+ rc = regmap_update_bits(vib->regmap,
+ vib->reg_base + vib->data->drv2_addr, mask, val);
+ if (rc < 0)
+ return rc;
+ }
+
if (vib->data->hw_type == SSBI_VIB)
return 0;

@@ -128,10 +169,13 @@ static void pm8xxx_work_handler(struct work_struct *work)
vib->active = true;
vib->level = ((VIB_MAX_LEVELS * vib->speed) / MAX_FF_SPEED) +
VIB_MIN_LEVEL_mV;
- vib->level /= 100;
+ if (vib->data->hw_type != SPMI_VIB_GEN2)
+ vib->level /= 100;
} else {
vib->active = false;
- vib->level = VIB_MIN_LEVEL_mV / 100;
+ vib->level = VIB_MIN_LEVEL_mV;
+ if (vib->data->hw_type != SPMI_VIB_GEN2)
+ vib->level /= 100;
}

pm8xxx_vib_set(vib, vib->active);
@@ -266,6 +310,7 @@ static const struct of_device_id pm8xxx_vib_id_table[] = {
{ .compatible = "qcom,pm8058-vib", .data = &ssbi_vib_data },
{ .compatible = "qcom,pm8921-vib", .data = &ssbi_vib_data },
{ .compatible = "qcom,pm8916-vib", .data = &spmi_vib_data },
+ { .compatible = "qcom,pmi632-vib", .data = &spmi_vib_gen2_data },
{ }
};
MODULE_DEVICE_TABLE(of, pm8xxx_vib_id_table);
--
2.25.1