[PATCH v4 5/8] drm: atmel_hlcdc: Add support for XLCDC in atmel LCD driver

From: Manikandan Muralidharan
Date: Fri Aug 25 2023 - 08:56:40 EST


- XLCDC in SAM9X7 has different sets of registers and additional
configuration bits when compared to previous HLCDC IP. Read/write
operation on the controller registers is now separated using the
XLCDC status flag.
- HEO scaling, window resampling, Alpha blending, YUV-to-RGB
conversion in XLCDC is derived and handled using additional
configuration bits and registers.
- Writing one to the Enable fields of each layer in LCD_ATTRE
is required to reflect the values set in Configuration, FBA, Enable
registers of each layer

Signed-off-by: Manikandan Muralidharan <manikandan.m@xxxxxxxxxxxxx>
Co-developed-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@xxxxxxxxxxxxx>
Signed-off-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@xxxxxxxxxxxxx>
Co-developed-by: Durai Manickam KR <durai.manickamkr@xxxxxxxxxxxxx>
Signed-off-by: Durai Manickam KR <durai.manickamkr@xxxxxxxxxxxxx>
---
.../gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 25 +-
.../gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 333 +++++++++++++++---
2 files changed, 299 insertions(+), 59 deletions(-)

diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
index cc5cf4c2faf7..4b11a1de8af4 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
@@ -79,6 +79,7 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
unsigned int mask = ATMEL_HLCDC_CLKDIV_MASK | ATMEL_HLCDC_CLKPOL;
unsigned int cfg = 0;
int div, ret;
+ bool is_xlcdc = crtc->dc->desc->is_xlcdc;

/* get encoder from crtc */
drm_for_each_encoder(en_iter, ddev) {
@@ -164,10 +165,10 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
state = drm_crtc_state_to_atmel_hlcdc_crtc_state(c->state);
cfg = state->output_mode << 8;

- if (adj->flags & DRM_MODE_FLAG_NVSYNC)
+ if (!is_xlcdc && (adj->flags & DRM_MODE_FLAG_NVSYNC))
cfg |= ATMEL_HLCDC_VSPOL;

- if (adj->flags & DRM_MODE_FLAG_NHSYNC)
+ if (!is_xlcdc && (adj->flags & DRM_MODE_FLAG_NHSYNC))
cfg |= ATMEL_HLCDC_HSPOL;

regmap_update_bits(regmap, ATMEL_HLCDC_CFG(5),
@@ -202,6 +203,16 @@ static void atmel_hlcdc_crtc_atomic_disable(struct drm_crtc *c,

pm_runtime_get_sync(dev->dev);

+ if (crtc->dc->desc->is_xlcdc) {
+ regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_XLCDC_CM);
+ regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
+ !(status & ATMEL_XLCDC_CM), 10, 0);
+
+ regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_XLCDC_SD);
+ regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
+ status & ATMEL_XLCDC_SD, 10, 0);
+ }
+
regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_HLCDC_DISP);
while (!regmap_read(regmap, ATMEL_HLCDC_SR, &status) &&
(status & ATMEL_HLCDC_DISP))
@@ -256,6 +267,16 @@ static void atmel_hlcdc_crtc_atomic_enable(struct drm_crtc *c,
!(status & ATMEL_HLCDC_DISP))
cpu_relax();

+ if (crtc->dc->desc->is_xlcdc) {
+ regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_XLCDC_CM);
+ regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
+ status & ATMEL_XLCDC_CM, 10, 0);
+
+ regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_XLCDC_SD);
+ regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
+ !(status & ATMEL_XLCDC_SD), 10, 0);
+ }
+
pm_runtime_put_sync(dev->dev);

}
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
index daa508504f47..26caf4cddfa4 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
@@ -330,11 +330,59 @@ static void atmel_hlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
yfactor));
}

+static void atmel_xlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
+ struct atmel_hlcdc_plane_state *state)
+{
+ const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+ u32 xfactor, yfactor;
+
+ if (!desc->layout.scaler_config)
+ return;
+
+ if (state->crtc_w == state->src_w && state->crtc_h == state->src_h) {
+ atmel_hlcdc_layer_write_cfg(&plane->layer,
+ desc->layout.scaler_config, 0);
+ return;
+ }
+
+ /* xfactor = round[(2^20 * XMEMSIZE)/XSIZE)] */
+ xfactor = (u32)(((1 << 20) * state->src_w) / state->crtc_w);
+
+ /* yfactor = round[(2^20 * YMEMSIZE)/YSIZE)] */
+ yfactor = (u32)(((1 << 20) * state->src_h) / state->crtc_h);
+
+ atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config,
+ ATMEL_XLCDC_LAYER_VSCALER_LUMA_ENABLE |
+ ATMEL_XLCDC_LAYER_VSCALER_CHROMA_ENABLE |
+ ATMEL_XLCDC_LAYER_HSCALER_LUMA_ENABLE |
+ ATMEL_XLCDC_LAYER_HSCALER_CHROMA_ENABLE);
+
+ atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 1,
+ yfactor);
+ atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 3,
+ xfactor);
+
+ /* As per YCbCr window resampling configuration */
+ if (state->base.fb->format->format == DRM_FORMAT_YUV420) {
+ atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 2,
+ yfactor / 2);
+ atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 4,
+ xfactor / 2);
+ } else {
+ /* As per ARGB window resampling configuration */
+ atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 2,
+ yfactor);
+ atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 4,
+ xfactor);
+ }
+}
+
static void
atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane,
struct atmel_hlcdc_plane_state *state)
{
const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+ struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;

if (desc->layout.size)
atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.size,
@@ -352,7 +400,10 @@ atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane,
ATMEL_HLCDC_LAYER_POS(state->crtc_x,
state->crtc_y));

- atmel_hlcdc_plane_setup_scaler(plane, state);
+ if (dc->desc->is_xlcdc)
+ atmel_xlcdc_plane_setup_scaler(plane, state);
+ else
+ atmel_hlcdc_plane_setup_scaler(plane, state);
}

static void
@@ -393,6 +444,40 @@ atmel_hlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
cfg);
}

+static void
+atmel_xlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
+ struct atmel_hlcdc_plane_state *state)
+{
+ unsigned int cfg;
+ const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+ const struct drm_format_info *format = state->base.fb->format;
+
+ atmel_hlcdc_layer_write_cfg(&plane->layer, ATMEL_XLCDC_LAYER_DMA_CFG,
+ ATMEL_HLCDC_LAYER_DMA_BLEN_INCR16 | state->ahb_id);
+
+ cfg = ATMEL_XLCDC_LAYER_DMA | ATMEL_XLCDC_LAYER_REP;
+
+ if (plane->base.type != DRM_PLANE_TYPE_PRIMARY) {
+ /*
+ * Alpha Blending bits specific to SAM9X7 SoC
+ */
+ cfg |= ATMEL_XLCDC_LAYER_SFACTC_A0_MULT_AS |
+ ATMEL_XLCDC_LAYER_SFACTA_ONE |
+ ATMEL_XLCDC_LAYER_DFACTC_M_A0_MULT_AS |
+ ATMEL_XLCDC_LAYER_DFACTA_ONE;
+ if (format->has_alpha)
+ cfg |= ATMEL_XLCDC_LAYER_A0(0xff);
+ else
+ cfg |= ATMEL_XLCDC_LAYER_A0(state->base.alpha);
+ }
+
+ if (state->disc_h && state->disc_w)
+ cfg |= ATMEL_XLCDC_LAYER_DISCEN;
+
+ atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.general_config,
+ cfg);
+}
+
static void atmel_hlcdc_plane_update_format(struct atmel_hlcdc_plane *plane,
struct atmel_hlcdc_plane_state *state)
{
@@ -437,36 +522,55 @@ static void atmel_hlcdc_plane_update_clut(struct atmel_hlcdc_plane *plane,
}
}

+static void update_hlcdc_buffers(struct atmel_hlcdc_plane *plane,
+ struct atmel_hlcdc_plane_state *state, u32 sr, int i)
+{
+ atmel_hlcdc_layer_write_reg(&plane->layer,
+ ATMEL_HLCDC_LAYER_PLANE_HEAD(i),
+ state->dscrs[i]->self);
+
+ if (!(sr & ATMEL_HLCDC_LAYER_EN)) {
+ atmel_hlcdc_layer_write_reg(&plane->layer,
+ ATMEL_HLCDC_LAYER_PLANE_ADDR(i),
+ state->dscrs[i]->addr);
+ atmel_hlcdc_layer_write_reg(&plane->layer,
+ ATMEL_HLCDC_LAYER_PLANE_CTRL(i),
+ state->dscrs[i]->ctrl);
+ atmel_hlcdc_layer_write_reg(&plane->layer,
+ ATMEL_HLCDC_LAYER_PLANE_NEXT(i),
+ state->dscrs[i]->self);
+ }
+}
+
+static void update_xlcdc_buffers(struct atmel_hlcdc_plane *plane,
+ struct atmel_hlcdc_plane_state *state, int i)
+{
+ atmel_hlcdc_layer_write_reg(&plane->layer,
+ ATMEL_XLCDC_LAYER_PLANE_ADDR(i),
+ state->dscrs[i]->addr);
+}
+
static void atmel_hlcdc_plane_update_buffers(struct atmel_hlcdc_plane *plane,
- struct atmel_hlcdc_plane_state *state)
+ struct atmel_hlcdc_plane_state *state)
{
const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+ struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
struct drm_framebuffer *fb = state->base.fb;
u32 sr;
int i;

- sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
+ if (!dc->desc->is_xlcdc)
+ sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);

for (i = 0; i < state->nplanes; i++) {
struct drm_gem_dma_object *gem = drm_fb_dma_get_gem_obj(fb, i);

state->dscrs[i]->addr = gem->dma_addr + state->offsets[i];

- atmel_hlcdc_layer_write_reg(&plane->layer,
- ATMEL_HLCDC_LAYER_PLANE_HEAD(i),
- state->dscrs[i]->self);
-
- if (!(sr & ATMEL_HLCDC_LAYER_EN)) {
- atmel_hlcdc_layer_write_reg(&plane->layer,
- ATMEL_HLCDC_LAYER_PLANE_ADDR(i),
- state->dscrs[i]->addr);
- atmel_hlcdc_layer_write_reg(&plane->layer,
- ATMEL_HLCDC_LAYER_PLANE_CTRL(i),
- state->dscrs[i]->ctrl);
- atmel_hlcdc_layer_write_reg(&plane->layer,
- ATMEL_HLCDC_LAYER_PLANE_NEXT(i),
- state->dscrs[i]->self);
- }
+ if (dc->desc->is_xlcdc)
+ update_xlcdc_buffers(plane, state, i);
+ else
+ update_hlcdc_buffers(plane, state, sr, i);

if (desc->layout.xstride[i])
atmel_hlcdc_layer_write_cfg(&plane->layer,
@@ -712,11 +816,8 @@ static int atmel_hlcdc_plane_atomic_check(struct drm_plane *p,
return 0;
}

-static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
- struct drm_atomic_state *state)
+static void hlcdc_atomic_disable(struct atmel_hlcdc_plane *plane)
{
- struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
-
/* Disable interrupts */
atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IDR,
0xffffffff);
@@ -731,6 +832,72 @@ static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
}

+static void xlcdc_atomic_disable(struct atmel_hlcdc_plane *plane)
+{
+ /* Disable interrupts */
+ atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_IDR,
+ 0xffffffff);
+
+ /* Disable the layer */
+ atmel_hlcdc_layer_write_reg(&plane->layer,
+ ATMEL_XLCDC_LAYER_ENR, 0);
+
+ /* Clear all pending interrupts */
+ atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR);
+}
+
+static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
+ struct drm_atomic_state *state)
+{
+ struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
+ struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
+
+ if (dc->desc->is_xlcdc)
+ xlcdc_atomic_disable(plane);
+ else
+ hlcdc_atomic_disable(plane);
+}
+
+static void hlcdc_atomic_update(struct atmel_hlcdc_plane *plane)
+{
+ u32 sr;
+
+ /* Enable the overrun interrupts. */
+ atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IER,
+ ATMEL_HLCDC_LAYER_OVR_IRQ(0) |
+ ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
+ ATMEL_HLCDC_LAYER_OVR_IRQ(2));
+
+ /* Apply the new config at the next SOF event. */
+ sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
+ atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHER,
+ ATMEL_HLCDC_LAYER_UPDATE |
+ (sr & ATMEL_HLCDC_LAYER_EN ?
+ ATMEL_HLCDC_LAYER_A2Q : ATMEL_HLCDC_LAYER_EN));
+}
+
+static void xlcdc_atomic_update(struct atmel_hlcdc_plane *plane,
+ struct atmel_hlcdc_dc *dc)
+{
+ /* Enable the overrun interrupts. */
+ atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_IER,
+ ATMEL_XLCDC_LAYER_OVR_IRQ(0) |
+ ATMEL_XLCDC_LAYER_OVR_IRQ(1) |
+ ATMEL_XLCDC_LAYER_OVR_IRQ(2));
+
+ atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_ENR,
+ ATMEL_XLCDC_LAYER_EN);
+
+ /*
+ * Updating XLCDC_xxxCFGx, XLCDC_xxxFBA and XLCDC_xxxEN,
+ * (where xxx indicates each layer) requires writing one to the
+ * Update Attribute field for each layer in LCDC_ATTRE register for SAM9X7.
+ */
+ regmap_write(dc->hlcdc->regmap, ATMEL_XLCDC_ATTRE, ATMEL_XLCDC_BASE_UPDATE |
+ ATMEL_XLCDC_OVR1_UPDATE | ATMEL_XLCDC_OVR3_UPDATE |
+ ATMEL_XLCDC_HEO_UPDATE);
+}
+
static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
struct drm_atomic_state *state)
{
@@ -739,7 +906,7 @@ static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
struct atmel_hlcdc_plane_state *hstate =
drm_plane_state_to_atmel_hlcdc_plane_state(new_s);
- u32 sr;
+ struct atmel_hlcdc_dc *dc = p->dev->dev_private;

if (!new_s->crtc || !new_s->fb)
return;
@@ -750,29 +917,67 @@ static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
}

atmel_hlcdc_plane_update_pos_and_size(plane, hstate);
- atmel_hlcdc_plane_update_general_settings(plane, hstate);
+ if (dc->desc->is_xlcdc)
+ atmel_xlcdc_plane_update_general_settings(plane, hstate);
+ else
+ atmel_hlcdc_plane_update_general_settings(plane, hstate);
atmel_hlcdc_plane_update_format(plane, hstate);
atmel_hlcdc_plane_update_clut(plane, hstate);
atmel_hlcdc_plane_update_buffers(plane, hstate);
atmel_hlcdc_plane_update_disc_area(plane, hstate);

- /* Enable the overrun interrupts. */
- atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IER,
- ATMEL_HLCDC_LAYER_OVR_IRQ(0) |
- ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
- ATMEL_HLCDC_LAYER_OVR_IRQ(2));
+ if (dc->desc->is_xlcdc)
+ xlcdc_atomic_update(plane, dc);
+ else
+ hlcdc_atomic_update(plane);
+}

- /* Apply the new config at the next SOF event. */
- sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
- atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHER,
- ATMEL_HLCDC_LAYER_UPDATE |
- (sr & ATMEL_HLCDC_LAYER_EN ?
- ATMEL_HLCDC_LAYER_A2Q : ATMEL_HLCDC_LAYER_EN));
+u32 hlcdc_csc_coeffs[] = {
+ 0x4c900091,
+ 0x7a5f5090,
+ 0x40040890
+};
+
+u32 xlcdc_csc_coeffs[] = {
+ 0x00000488,
+ 0x00000648,
+ 0x1EA00480,
+ 0x00001D28,
+ 0x08100480,
+ 0x00000000,
+ 0x00000007
+};
+
+static void hlcdc_csc_init(struct atmel_hlcdc_plane *plane,
+ const struct atmel_hlcdc_layer_desc *desc)
+{
+ /*
+ * TODO: declare a "yuv-to-rgb-conv-factors" property to let
+ * userspace modify these factors (using a BLOB property ?).
+ */
+ for (int i = 0; i < ARRAY_SIZE(hlcdc_csc_coeffs); i++)
+ atmel_hlcdc_layer_write_cfg(&plane->layer,
+ desc->layout.csc + i,
+ hlcdc_csc_coeffs[i]);
+}
+
+static void xlcdc_csc_init(struct atmel_hlcdc_plane *plane,
+ const struct atmel_hlcdc_layer_desc *desc)
+{
+ /*
+ * yuv-to-rgb-conv-factors are now defined from LCDC_HEOCFG16 to
+ * LCDC_HEOCFG21 registers in SAM9X7.
+ */
+ for (int i = 0; i < ARRAY_SIZE(xlcdc_csc_coeffs); i++)
+ atmel_hlcdc_layer_write_cfg(&plane->layer,
+ desc->layout.csc + i,
+ xlcdc_csc_coeffs[i]);
}

static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane)
{
const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+ struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;

if (desc->type == ATMEL_HLCDC_OVERLAY_LAYER ||
desc->type == ATMEL_HLCDC_CURSOR_LAYER) {
@@ -796,31 +1001,19 @@ static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane)
return ret;
}

- if (desc->layout.csc) {
- /*
- * TODO: decare a "yuv-to-rgb-conv-factors" property to let
- * userspace modify these factors (using a BLOB property ?).
- */
- atmel_hlcdc_layer_write_cfg(&plane->layer,
- desc->layout.csc,
- 0x4c900091);
- atmel_hlcdc_layer_write_cfg(&plane->layer,
- desc->layout.csc + 1,
- 0x7a5f5090);
- atmel_hlcdc_layer_write_cfg(&plane->layer,
- desc->layout.csc + 2,
- 0x40040890);
- }
+ if (dc->desc->is_xlcdc && desc->layout.csc)
+ xlcdc_csc_init(plane, desc);
+ else
+ if (desc->layout.csc)
+ hlcdc_csc_init(plane, desc);

return 0;
}

-void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
+static void hlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
+ const struct atmel_hlcdc_layer_desc *desc)
{
- const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
- u32 isr;
-
- isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
+ u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);

/*
* There's not much we can do in case of overrun except informing
@@ -830,8 +1023,34 @@ void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
if (isr &
(ATMEL_HLCDC_LAYER_OVR_IRQ(0) | ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
ATMEL_HLCDC_LAYER_OVR_IRQ(2)))
- dev_dbg(plane->base.dev->dev, "overrun on plane %s\n",
- desc->name);
+ pr_warn("%s: overrun on plane %s\n", __func__, desc->name);
+}
+
+static void xlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
+ const struct atmel_hlcdc_layer_desc *desc)
+{
+ u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR);
+
+ /*
+ * There's not much we can do in case of overrun except informing
+ * the user. However, we are in interrupt context here, hence the
+ * use of dev_dbg().
+ */
+ if (isr &
+ (ATMEL_XLCDC_LAYER_OVR_IRQ(0) | ATMEL_XLCDC_LAYER_OVR_IRQ(1) |
+ ATMEL_XLCDC_LAYER_OVR_IRQ(2)))
+ pr_warn("%s: overrun on plane %s\n", __func__, desc->name);
+}
+
+void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
+{
+ const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
+ struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
+
+ if (dc->desc->is_xlcdc)
+ xlcdc_irq_dbg(plane, desc);
+ else
+ hlcdc_irq_dbg(plane, desc);
}

static const struct drm_plane_helper_funcs atmel_hlcdc_layer_plane_helper_funcs = {
--
2.25.1