Re: [syzbot] [input?] KASAN: slab-use-after-free Read in input_dev_uevent

From: Dmitry Torokhov
Date: Wed Aug 23 2023 - 13:57:58 EST


On Wed, Aug 23, 2023 at 10:04:34AM -0700, Rahul Rameshbabu wrote:
> On Wed, 23 Aug, 2023 07:55:17 -0700 Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> wrote:
> > Hi Maxime,
> >
> > On Wed, Aug 23, 2023 at 03:16:02PM +0200, Maxime Ripard wrote:
> >> Hi Dmitry,
> >>
> >> On Wed, Aug 23, 2023 at 05:51:00AM -0700, Dmitry Torokhov wrote:
> >> > On Wed, Aug 23, 2023 at 09:44:22AM +0200, Maxime Ripard wrote:
> >> > > On Tue, Aug 22, 2023 at 08:57:41AM -0700, Rahul Rameshbabu wrote:
> >> > > > On Tue, 22 Aug, 2023 11:12:28 +0200 Maxime Ripard <mripard@xxxxxxxxxx> wrote:
> >> > > > > Hi,
> >> > > > >
> >> > > > > So, we discussed it this morning with Benjamin, and I think the culprit
> >> > > > > is that the uclogic driver will allocate a char array with devm_kzalloc
> >> > > > > in uclogic_input_configured()
> >> > > > > (https://elixir.bootlin.com/linux/latest/source/drivers/hid/hid-uclogic-core.c#L149),
> >> > > > > and will assign input_dev->name to that pointer.
> >> > > > >
> >> > > > > When the device is removed, the devm-allocated array is freed, and the
> >> > > > > input framework will send a uevent in input_dev_uevent() using the
> >> > > > > input_dev->name field:
> >> > > > >
> >> > > > > https://elixir.bootlin.com/linux/latest/source/drivers/input/input.c#L1688
> >> > > > >
> >> > > > > So it's a classic dangling pointer situation.
> >> > > > >
> >> > > > > And even though it was revealed by that patch, I think the issue is
> >> > > > > unrelated. The fundamental issue seems to be that the usage of devm in
> >> > > > > that situation is wrong.
> >> > > > >
> >> > > > > input_dev->name is accessed by input_dev_uevent, which for KOBJ_UNBIND
> >> > > > > and KOBJ_REMOVE will be called after remove.
> >> > > > >
> >> > > > > For example, in __device_release_driver() (with the driver remove hook
> >> > > > > being called in device_remove() and devres_release_all() being called in
> >> > > > > device_unbind_cleanup()):
> >> > > > > https://elixir.bootlin.com/linux/latest/source/drivers/base/dd.c#L1278
> >> > > > >
> >> > > > > So, it looks to me that, with or without the patch we merged recently,
> >> > > > > the core has always sent uevent after device-managed resources were
> >> > > > > freed. Thus, the uclogic (and any other input driver) was wrong in
> >> > > > > allocating its input_dev name with devm_kzalloc (or the phys and uniq
> >> > > > > fields in that struct).
> >> > > > >
> >> > > > > Note that freeing input_dev->name in remove would have been just as bad.
> >> > > > >
> >> > > > > Looking at the code quickly, at least hid-playstation,
> >> > > > > hid-nvidia-shield, hid-logitech-hidpp, mms114 and tsc200x seem to be
> >> > > > > affected by the same issue.
> >> > > >
> >> > > > I agree with this analysis overall. At least in hid-nvidia-shield, I can
> >> > > > not use devm for allocating the input name string and explicitly free it
> >> > > > after calling input_unregister_device. In this scenario, the name string
> >> > > > would have been freed explicitly after input_put_device was called
> >> > > > (since the input device is not devres managed). input_put_device would
> >> > > > drop the reference count to zero and the device would be cleaned up at
> >> > > > that point triggering KOBJ_REMOVE and firing off that final
> >> > > > input_dev_uevent.
> >> > > >
> >> > > > I think this can be done for a number of the drivers as a workaround
> >> > > > till this issue is properly resolved. If this seems appropriate, I can
> >> > > > send out a series later in the day. This is just a workaround till the
> >> > > > discussion below converges (which I am interested in).
> >> > >
> >> > > I'm sorry, I don't know the input framework well enough to understand
> >> > > what you had in mind exactly. Could you send a patch with your
> >> > > suggestion for the hid-nvidia-shield so we can discuss this further?
> >> > >
> >> > > That being said, I think that the current design around name, phys and
> >> > > uniq is fairly treacherous to drivers and we should aim for a solution
> >> > > that prevents that issue from being possible at all.
> >> > >
> >> > > I was inclined to go for a char array for each to get rid of the pointer
> >> > > entirely, but Benjamin raised some concerns over the structure size so
> >> > > it's probably not a great solution.
> >> >
> >> > I think everything is much simpler, with uclogic driver being in the
> >> > wrong here: devm resource needs to be attached to the right device
> >> > (instance of HID) rather than to the input device itself (which should
> >> > never have any driver resources attached since it never has a driver).
> >> > Something like this:
> >> >
> >> > diff --git a/drivers/hid/hid-uclogic-core.c b/drivers/hid/hid-uclogic-core.c
> >> > index f67835f9ed4c..f234a7c97360 100644
> >> > --- a/drivers/hid/hid-uclogic-core.c
> >> > +++ b/drivers/hid/hid-uclogic-core.c
> >> > @@ -148,7 +148,7 @@ static int uclogic_input_configured(struct hid_device *hdev,
> >> >
> >> > if (suffix) {
> >> > len = strlen(hdev->name) + 2 + strlen(suffix);
> >> > - name = devm_kzalloc(&hi->input->dev, len, GFP_KERNEL);
> >> > + name = devm_kzalloc(&hdev->dev, len, GFP_KERNEL);
> >> > if (name) {
> >> > snprintf(name, len, "%s %s", hdev->name, suffix);
> >> > hi->input->name = name;
> >> >
> >> > In general, drivers should attach devm resources they allocate to the
> >> > instance of device they are binding to, and nothing else.
> >>
> >> I'm not sure that's enough unfortunately. The fundamental issue here
> >> seems to be that input_dev_uevent follows a pointer that can be
> >> allocated by the driver, and will be free'd before the last call to
> >> input_dev_uevent.
> >
> > Yes, this is a fundamental property of C pointers - you should not free
> > them before exiting last code section that may reference them. For input
> > devices it means that pointers should not be freed until after
> > input_unregister_device() is called.
> >
> > I.e. you have sequence like this:
> >
> > driver_data = kzalloc(...);
> > driver_data->input_name = kstrdup(...);
> > driver_data->input_phys = kstrdup(...);
> > input = input_allocate_device();
> > input->name = driver_data->input_name;
> > input->phys = driver_data->input_phys;
> > input_register_device(input);
> > ...
> >
> > input_unregister_device(input);
> > kfree(driver_data->input_name);
> > kfree(driver_data->input_phys);
> > kfree(driver_data);
> >
> >
> > devm typically helps with resources being freed at the right time, but
> > for that the managed resources should be attached to the *correct
> > device*, with correct device being one the driver is binding to, not any
> > random device structure.
> >
> >>
> >> And I think that's true for both devices here
> >
> > Yes, it looks like the shield is also using wrong device.
>
> This is a problem in shield too. I'll submit a patch. I'll take a look
> at other drivers as well to see if any of them run into this issue.
>
> idev->name = devm_kasprintf(&idev->dev, GFP_KERNEL, "%s %s", hdev->name,
> name_suffix);

I did a quick scan in drivers/hid and it looks like hid-multitouch.c
also has this issue. So that makes 3 - hid-multitouch, uclogic and the
shield drivers.

Thanks.

--
Dmitry