Re: [PATCH] ALSA: hda: cs35l41: Support ASUS 2023 laptops with missing DSD

From: Takashi Iwai
Date: Wed Aug 23 2023 - 03:38:05 EST


On Wed, 23 Aug 2023 09:28:39 +0200,
Luke Jones wrote:
>
>
>
> On Wed, Aug 23 2023 at 08:24:51 +02:00:00, Takashi Iwai
> <tiwai@xxxxxxx> wrote:
> > On Wed, 23 Aug 2023 03:10:08 +0200,
> > Luke D. Jones wrote:
> >>
> >> Support adding the missing DSD properties required for ASUS ROG
> >> 2023
> >> laptops and other ASUS laptops to properly utilise the cs35l41.
> >>
> >> This support includes both I2C and SPI connected amps.
> >>
> >> The SPI connected amps may be required to use an external DSD patch
> >> to fix or add the "cs-gpios" property.
> >>
> >> Co-developed-by: Jonathan LoBue <jlobue10@xxxxxxxxx>
> >> Signed-off-by: Jonathan LoBue <jlobue10@xxxxxxxxx>
> >> Co-developed-by: Luke D. Jones <luke@xxxxxxxxxx>
> >> Signed-off-by: Luke D. Jones <luke@xxxxxxxxxx>
> >> ---
> >> sound/pci/hda/cs35l41_hda_property.c | 26
> >> ++++++++++++++++++++++++++
> >> 1 file changed, 26 insertions(+)
> >>
> >> diff --git a/sound/pci/hda/cs35l41_hda_property.c
> >> b/sound/pci/hda/cs35l41_hda_property.c
> >> index 673f23257a09..69879ab57918 100644
> >> --- a/sound/pci/hda/cs35l41_hda_property.c
> >> +++ b/sound/pci/hda/cs35l41_hda_property.c
> >> @@ -43,6 +43,31 @@ static int lenovo_legion_no_acpi(struct
> >> cs35l41_hda *cs35l41, struct device *phy
> >> return 0;
> >> }
> >>
> >> +/*
> >> + * The CSC3551 is used in almost the entire ASUS ROG laptop range
> >> in 2023, this is likely to
> >> + * also include many non ROG labelled laptops. It is also used
> >> with either I2C connection or
> >> + * SPI connection. The SPI connected versions may be missing a
> >> chip select GPIO and require
> >> + * an DSD table patch.
> >> + */
> >> +static int asus_rog_2023_no_acpi(struct cs35l41_hda *cs35l41,
> >> struct device *physdev, int id,
> >> + const char *hid)
> >> +{
> >> + struct cs35l41_hw_cfg *hw_cfg = &cs35l41->hw_cfg;
> >> +
> >> + /* check SPI or I2C address to assign the index */
> >> + cs35l41->index = (id == 0 || id == 0x40) ? 0 : 1;
> >> + cs35l41->channel_index = 0;
> >> + cs35l41->reset_gpio = gpiod_get_index(physdev, NULL, 0,
> >> GPIOD_OUT_HIGH);
> >> + cs35l41->speaker_id = cs35l41_get_speaker_id(physdev, 0, 0, 2);
> >> + hw_cfg->spk_pos = cs35l41->index;
> >> + hw_cfg->gpio2.func = CS35L41_INTERRUPT;
> >> + hw_cfg->gpio2.valid = true;
> >> + hw_cfg->bst_type = CS35L41_EXT_BOOST_NO_VSPK_SWITCH;
> >> + hw_cfg->valid = true;
> >> +
> >> + return 0;
> >> +}
> >> +
> >> struct cs35l41_prop_model {
> >> const char *hid;
> >> const char *ssid;
> >> @@ -53,6 +78,7 @@ struct cs35l41_prop_model {
> >> const struct cs35l41_prop_model cs35l41_prop_model_table[] = {
> >> { "CLSA0100", NULL, lenovo_legion_no_acpi },
> >> { "CLSA0101", NULL, lenovo_legion_no_acpi },
> >> + { "CSC3551", NULL, asus_rog_2023_no_acpi },
> >
> > I believe this breaks things badly. cs35l41_add_dsd_properties() is
> > always called no matter whether _DSD is found or not. So this will
> > override the setup of all machines with CSC3551 even if it has a
> > proper _DSD.
>
> These are the entries I know of so far since they definitely had to be
> added and have a DSD patch:
>
> - SPI_2
> - 0x1043, 0x1473, "ASUS GU604V"
> - 0x1043, 0x1483, "ASUS GU603V"
> - 0x1043, 0x1493, "ASUS GV601V"
> - 0x1043, 0x1573, "ASUS GZ301V"
> - 0x1043, 0x1c9f, "ASUS G614JI"
> - SPI_4
> - 0x1043, 0x1caf, "ASUS G634JYR/JZR"
> - I2C_2
> - 0x1043, 0x1d1f, "ASUS ROG Strix G17
> - 0x1043, 0x1463, "Asus GA402X"
> - 0x1043, 0x1433, "ASUS GX650P"
> - ROG ALLY
>
> You can see the variants are V, J, X, and P. A grep through the DSL
> dumps I have collected reveals that these machines are all indeed
> missing DSD entries. These are a mix of I2C and SPI.
>
> The patch I submitted was based on Stefan's work only, and tested on 3
> SPI machines plus 2 I2C machines with no issues except the SPI
> machines needing a chipselect DSD patch.
>
> It's worth stating that the DSD patches people were using all followed
> the exact same template except for the SPI number, or speaker ID.
>
> I'd wager it being a safe bet to assume that every one of the ASUS
> laptops this year using the CSC3551 will be missing the required DSD
> entries given the trend so far.

Yes, I know that there are tons of such devices that need the
workaround for missing _DSD. My point is, however, that your patch
breaks the devices that *do have* _DSD, because the function always
overrides.

> > The existing entries of CLSA0100 and CLSA0101 are OK since
> > (supposedly) those never had _DSD. The current code is a bit
> > misleading as if it's applicable easily, though.
> >
> > That said, we have to apply the setup only conditionally for each
> > specific device. One easy thing would be to move the function call
> > after _DSD check. But, I *guess* that Stefan applied the function at
> > the top so that it may cover the all cases including incorrect _DSD
> > properties.
>
> Given the trend of what I've seen this seems like a reasonable
> assumption and desired.

... and it's not enough. That's another point. The parameters aren't
always same for all devices but may vary. That is, it must have some
check of devices and models to identify which parameters may be used.

> > And, the question is how to be specific to each device. This can be
> > messy, as the sub-codec driver is probed independently from Realtek
> > codec driver, hence you can't pass any flag from Realtek to CS driver
> > at the probe time. In the end, we might need to keep another table of
> > IDs (either the same SSID or DMI) to distinguish which machine needs
> > which properties.
>
> Is there some other ID we can use? I see:
> [ 13.569242] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: Cirrus Logic
> CS35L41 (35a40), Revision: B2
> and I'd assume that 35a40 is unique? A bit of searching on my discord
> reveals that all the machines I listed that require the same patch
> also have this identifier (including a ProArt laptop).

That's not unique to each *device* (not the chip model). Say, we want
to distinguish ASUS GU604V and ASUS G64JYR. They may have different
setups.

I guess only DMI is suitable at the time of probing this driver.


Takashi