[PATCH v4 2/2] gpio: loongson: add more gpio chip support

From: Yinbo Zhu
Date: Tue Aug 22 2023 - 23:34:43 EST


This patch was to add loongson 2k0500, 2k2000 and 3a5000 gpio chip
driver support.

Signed-off-by: Yinbo Zhu <zhuyinbo@xxxxxxxxxxx>
---
drivers/gpio/gpio-loongson-64bit.c | 136 +++++++++++++++++++++++++++--
1 file changed, 128 insertions(+), 8 deletions(-)

diff --git a/drivers/gpio/gpio-loongson-64bit.c b/drivers/gpio/gpio-loongson-64bit.c
index 06213bbfabdd..8786d0a21bbb 100644
--- a/drivers/gpio/gpio-loongson-64bit.c
+++ b/drivers/gpio/gpio-loongson-64bit.c
@@ -23,9 +23,10 @@ enum loongson_gpio_mode {
struct loongson_gpio_chip_data {
const char *label;
enum loongson_gpio_mode mode;
- unsigned int conf_offset;
- unsigned int out_offset;
- unsigned int in_offset;
+ u32 conf_offset;
+ u32 out_offset;
+ u32 in_offset;
+ u32 inten_offset;
};

struct loongson_gpio_chip {
@@ -117,7 +118,17 @@ static void loongson_gpio_set(struct gpio_chip *chip, unsigned int pin, int valu

static int loongson_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
{
+ unsigned int u;
struct platform_device *pdev = to_platform_device(chip->parent);
+ struct loongson_gpio_chip *lgpio = to_loongson_gpio_chip(chip);
+
+ if (lgpio->chip_data->mode == BIT_CTRL_MODE) {
+ u = readl(lgpio->reg_base + lgpio->chip_data->inten_offset + offset / 32 * 4);
+ u |= BIT(offset % 32);
+ writel(u, lgpio->reg_base + lgpio->chip_data->inten_offset + offset / 32 * 4);
+ } else {
+ writeb(1, lgpio->reg_base + lgpio->chip_data->inten_offset + offset);
+ }

return platform_get_irq(pdev, offset);
}
@@ -127,11 +138,30 @@ static int loongson_gpio_init(struct device *dev, struct loongson_gpio_chip *lgp
{
int ret;
u32 ngpios;
+ unsigned int io_width;

lgpio->reg_base = reg_base;
+ if (device_property_read_u32(dev, "ngpios", &ngpios) || !ngpios)
+ return -EINVAL;
+
+ ret = DIV_ROUND_UP(ngpios, 8);
+ switch (ret) {
+ case 1 ... 2:
+ io_width = ret;
+ break;
+ case 3 ... 4:
+ io_width = 0x4;
+ break;
+ case 5 ... 8:
+ io_width = 0x8;
+ break;
+ default:
+ dev_err(dev, "unsupported io width\n");
+ return -EINVAL;
+ }

if (lgpio->chip_data->mode == BIT_CTRL_MODE) {
- ret = bgpio_init(&lgpio->chip, dev, 8,
+ ret = bgpio_init(&lgpio->chip, dev, io_width,
lgpio->reg_base + lgpio->chip_data->in_offset,
lgpio->reg_base + lgpio->chip_data->out_offset,
NULL, NULL,
@@ -151,12 +181,11 @@ static int loongson_gpio_init(struct device *dev, struct loongson_gpio_chip *lgp
spin_lock_init(&lgpio->lock);
}

- device_property_read_u32(dev, "ngpios", &ngpios);
-
- lgpio->chip.can_sleep = 0;
lgpio->chip.ngpio = ngpios;
lgpio->chip.label = lgpio->chip_data->label;
- lgpio->chip.to_irq = loongson_gpio_to_irq;
+ lgpio->chip.can_sleep = 0;
+ if (lgpio->chip_data->inten_offset)
+ lgpio->chip.to_irq = loongson_gpio_to_irq;

return devm_gpiochip_add_data(dev, &lgpio->chip, lgpio);
}
@@ -187,6 +216,57 @@ static const struct loongson_gpio_chip_data loongson_gpio_ls2k_data = {
.conf_offset = 0x0,
.in_offset = 0x20,
.out_offset = 0x10,
+ .inten_offset = 0x30,
+};
+
+static const struct loongson_gpio_chip_data loongson_gpio_ls2k0500_data0 = {
+ .label = "ls2k0500_gpio",
+ .mode = BIT_CTRL_MODE,
+ .conf_offset = 0x0,
+ .in_offset = 0x8,
+ .out_offset = 0x10,
+ .inten_offset = 0xb0,
+};
+
+static const struct loongson_gpio_chip_data loongson_gpio_ls2k0500_data1 = {
+ .label = "ls2k0500_gpio",
+ .mode = BIT_CTRL_MODE,
+ .conf_offset = 0x0,
+ .in_offset = 0x8,
+ .out_offset = 0x10,
+ .inten_offset = 0x98,
+};
+
+static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data0 = {
+ .label = "ls2k2000_gpio",
+ .mode = BIT_CTRL_MODE,
+ .conf_offset = 0x0,
+ .in_offset = 0xc,
+ .out_offset = 0x8,
+};
+
+static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data1 = {
+ .label = "ls2k2000_gpio",
+ .mode = BIT_CTRL_MODE,
+ .conf_offset = 0x0,
+ .in_offset = 0x20,
+ .out_offset = 0x10,
+};
+
+static const struct loongson_gpio_chip_data loongson_gpio_ls2k2000_data2 = {
+ .label = "ls2k2000_gpio",
+ .mode = BIT_CTRL_MODE,
+ .conf_offset = 0x84,
+ .in_offset = 0x88,
+ .out_offset = 0x80,
+};
+
+static const struct loongson_gpio_chip_data loongson_gpio_ls3a5000_data = {
+ .label = "ls3a5000_gpio",
+ .mode = BIT_CTRL_MODE,
+ .conf_offset = 0x0,
+ .in_offset = 0xc,
+ .out_offset = 0x8,
};

static const struct loongson_gpio_chip_data loongson_gpio_ls7a_data = {
@@ -202,6 +282,30 @@ static const struct of_device_id loongson_gpio_of_match[] = {
.compatible = "loongson,ls2k-gpio",
.data = &loongson_gpio_ls2k_data,
},
+ {
+ .compatible = "loongson,ls2k0500-gpio0",
+ .data = &loongson_gpio_ls2k0500_data0,
+ },
+ {
+ .compatible = "loongson,ls2k0500-gpio1",
+ .data = &loongson_gpio_ls2k0500_data1,
+ },
+ {
+ .compatible = "loongson,ls2k2000-gpio0",
+ .data = &loongson_gpio_ls2k2000_data0,
+ },
+ {
+ .compatible = "loongson,ls2k2000-gpio1",
+ .data = &loongson_gpio_ls2k2000_data1,
+ },
+ {
+ .compatible = "loongson,ls2k2000-gpio2",
+ .data = &loongson_gpio_ls2k2000_data2,
+ },
+ {
+ .compatible = "loongson,ls3a5000-gpio",
+ .data = &loongson_gpio_ls3a5000_data,
+ },
{
.compatible = "loongson,ls7a-gpio",
.data = &loongson_gpio_ls7a_data,
@@ -215,6 +319,22 @@ static const struct acpi_device_id loongson_gpio_acpi_match[] = {
.id = "LOON0002",
.driver_data = (kernel_ulong_t)&loongson_gpio_ls7a_data,
},
+ {
+ .id = "LOON0007",
+ .driver_data = (kernel_ulong_t)&loongson_gpio_ls3a5000_data,
+ },
+ {
+ .id = "LOON000A",
+ .driver_data = (kernel_ulong_t)&loongson_gpio_ls2k2000_data0,
+ },
+ {
+ .id = "LOON000B",
+ .driver_data = (kernel_ulong_t)&loongson_gpio_ls2k2000_data1,
+ },
+ {
+ .id = "LOON000C",
+ .driver_data = (kernel_ulong_t)&loongson_gpio_ls2k2000_data2,
+ },
{}
};
MODULE_DEVICE_TABLE(acpi, loongson_gpio_acpi_match);
--
2.20.1