Re: [PATCH v2 2/3] thermal: sun8i: Add support for H616 THS controller

[Andre Przywara]

On Mon, 21 Aug 2023 16:03:47 +0200
Martin Botka <martin.botka@xxxxxxxxxxxxxx> wrote:

Hi Martin,

thanks for the changes, that looks good to me now.
Just some tiny nitpick below, but only if you need to re-spin the series
for whatever reason.

> Add support for the thermal sensor found in H616 SoC
> which slightly resembles the H6 thermal sensor
> controller with few changes like 4 sensors.

Regardless:

> Signed-off-by: Martin Botka <martin.botka@xxxxxxxxxxxxxx>

Reviewed-by: Andre Przywara <andre.przywara@xxxxxxx>

> ---
>  drivers/thermal/sun8i_thermal.c | 74 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 74 insertions(+)
> 
> diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
> index 195f3c5d0b38..cf96ab6a445b 100644
> --- a/drivers/thermal/sun8i_thermal.c
> +++ b/drivers/thermal/sun8i_thermal.c
> @@ -278,6 +278,66 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
>  	return 0;
>  }
>  
> +static int sun50i_h616_ths_calibrate(struct ths_device *tmdev,
> +				     u16 *caldata, int callen)
> +{
> +	struct device *dev = tmdev->dev;
> +	int i, ft_temp;
> +
> +	if (!caldata[0])
> +		return -EINVAL;
> +
> +	/*
> +	 * h616 efuse THS calibration data layout:
> +	 *
> +	 * 0      11  16     27   32     43   48    57
> +	 * +----------+-----------+-----------+-----------+
> +	 * |  temp |  |sensor0|   |sensor1|   |sensor2|   |
> +	 * +----------+-----------+-----------+-----------+
> +	 *                      ^           ^           ^
> +	 *                      |           |           |
> +	 *                      |           |           sensor3[11:8]
> +	 *                      |           sensor3[7:4]
> +	 *                      sensor3[3:0]
> +	 *
> +	 * The calibration data on the H616 is the ambient temperature and
> +	 * sensor values that are filled during the factory test stage.
> +	 *
> +	 * The unit of stored FT temperature is 0.1 degree celsius.
> +	 */
> +	ft_temp = caldata[0] & FT_TEMP_MASK;
> +
> +	for (i = 0; i < tmdev->chip->sensor_num; i++) {
> +		int delta, cdata, offset, reg;
> +
> +		if (i == 3)
> +			reg = (caldata[1] >> 12)
> +			      | ((caldata[2] >> 12) << 4)
> +			      | ((caldata[3] >> 12) << 8);
> +		else
> +			reg = (int)caldata[i + 1] & TEMP_CALIB_MASK;
> +
> +		int sensor_temp = tmdev->chip->calc_temp(tmdev, i, reg);

If you shorten that variable name by a bit, you can fit the division on
the same line below. And that it looks all neat and satisfying again ;-)

Cheers,
Andre

> +
> +		delta = (sensor_temp - ft_temp * 100) * 10;
> +		delta /= tmdev->chip->scale;
> +		cdata = CALIBRATE_DEFAULT - delta;
> +		if (cdata & ~TEMP_CALIB_MASK) {
> +			dev_warn(dev, "sensor%d is not calibrated.\n", i);
> +
> +			continue;
> +		}
> +
> +		offset = (i % 2) * 16;
> +		regmap_update_bits(tmdev->regmap,
> +				   SUN50I_H6_THS_TEMP_CALIB + (i / 2 * 4),
> +				   TEMP_CALIB_MASK << offset,
> +				   cdata << offset);
> +	}
> +
> +	return 0;
> +}
> +
>  static int sun8i_ths_calibrate(struct ths_device *tmdev)
>  {
>  	struct nvmem_cell *calcell;
> @@ -608,6 +668,19 @@ static const struct ths_thermal_chip sun50i_h6_ths = {
>  	.calc_temp = sun8i_ths_calc_temp,
>  };
>  
> +static const struct ths_thermal_chip sun50i_h616_ths = {
> +	.sensor_num = 4,
> +	.has_bus_clk_reset = true,
> +	.ft_deviation = 8000,
> +	.offset = 263655,
> +	.scale = 810,
> +	.temp_data_base = SUN50I_H6_THS_TEMP_DATA,
> +	.calibrate = sun50i_h616_ths_calibrate,
> +	.init = sun50i_h6_thermal_init,
> +	.irq_ack = sun50i_h6_irq_ack,
> +	.calc_temp = sun8i_ths_calc_temp,
> +};
> +
>  static const struct of_device_id of_ths_match[] = {
>  	{ .compatible = "allwinner,sun8i-a83t-ths", .data = &sun8i_a83t_ths },
>  	{ .compatible = "allwinner,sun8i-h3-ths", .data = &sun8i_h3_ths },
> @@ -616,6 +689,7 @@ static const struct of_device_id of_ths_match[] = {
>  	{ .compatible = "allwinner,sun50i-a100-ths", .data = &sun50i_a100_ths },
>  	{ .compatible = "allwinner,sun50i-h5-ths", .data = &sun50i_h5_ths },
>  	{ .compatible = "allwinner,sun50i-h6-ths", .data = &sun50i_h6_ths },
> +	{ .compatible = "allwinner,sun50i-h616-ths", .data = &sun50i_h616_ths },
>  	{ /* sentinel */ },
>  };
>  MODULE_DEVICE_TABLE(of, of_ths_match);
>