[PATCH v3] serial: 8250_bcm7271: improve bcm7271 8250 port

From: Justin Chen
Date: Fri Aug 18 2023 - 17:27:16 EST


The 8250 BCM7271 UART is not a direct match to PORT_16550A and other
generic ports do not match its hardware capabilities. PORT_ALTR matches
the rx trigger levels, but its vendor configurations are not compatible.
Unfortunately this means we need to create another port to fully capture
the hardware capabilities of the BCM7271 UART.

To alleviate some latency pressures, we default the rx trigger level to 8.

Signed-off-by: Justin Chen <justin.chen@xxxxxxxxxxxx>
Reviewed-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
Acked-by: Doug Berger <opendmb@xxxxxxxxx>
---
v3
- Switch PORT_BCM7271 to 13
- Added trailing comma to struct declaration

v2
- Switch PORT_BCM7271 to 76
- Elaborated commit message
- Renamed port name

drivers/tty/serial/8250/8250_bcm7271.c | 4 +---
drivers/tty/serial/8250/8250_port.c | 8 ++++++++
include/uapi/linux/serial_core.h | 1 +
3 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c
index d4b05d7ad9e8..aa5aff046756 100644
--- a/drivers/tty/serial/8250/8250_bcm7271.c
+++ b/drivers/tty/serial/8250/8250_bcm7271.c
@@ -1042,7 +1042,7 @@ static int brcmuart_probe(struct platform_device *pdev)
dev_dbg(dev, "DMA is %senabled\n", priv->dma_enabled ? "" : "not ");

memset(&up, 0, sizeof(up));
- up.port.type = PORT_16550A;
+ up.port.type = PORT_BCM7271;
up.port.uartclk = clk_rate;
up.port.dev = dev;
up.port.mapbase = mapbase;
@@ -1056,8 +1056,6 @@ static int brcmuart_probe(struct platform_device *pdev)
| UPF_FIXED_PORT | UPF_FIXED_TYPE;
up.port.dev = dev;
up.port.private_data = priv;
- up.capabilities = UART_CAP_FIFO | UART_CAP_AFE;
- up.port.fifosize = 32;

/* Check for a fixed line number */
ret = of_alias_get_id(np, "serial");
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 16aeb1420137..7fb1d7c00001 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -322,6 +322,14 @@ static const struct serial8250_config uart_config[] = {
.rxtrig_bytes = {2, 66, 130, 194},
.flags = UART_CAP_FIFO,
},
+ [PORT_BCM7271] = {
+ .name = "Broadcom BCM7271 UART",
+ .fifo_size = 32,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01,
+ .rxtrig_bytes = {1, 8, 16, 30},
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
};

/* Uart divisor latch read */
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index 281fa286555c..04ea56a0c342 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -26,6 +26,7 @@
/*
* The type definitions. These are from Ted Ts'o's serial.h
*/
+#define PORT_BCM7271 13 /* Broadcom BCM7271 UART */
#define PORT_NS16550A 14
#define PORT_XSCALE 15
#define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */
--
2.7.4

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature