Re: [PATCH v3] riscv: dts: allwinner: d1: Add CAN controller nodes

[Chen-Yu Tsai]

On Sun, Aug 13, 2023 at 12:23 PM John Watts <contact@xxxxxxxxxx> wrote:
>
> On Sun, Aug 13, 2023 at 12:17:27PM +0800, Chen-Yu Tsai wrote:
> > > Signed-off-by: John Watts <contact@xxxxxxxxxx>
> > > ---
> > > Changes in v3:
> > > - Set default pinctrl for can controller
> > > - Moved can nodes to proper location
> > > - Moved can pins to proper location
> > >
> > >  .../boot/dts/allwinner/sunxi-d1s-t113.dtsi    | 34 +++++++++++++++++++
> > >  1 file changed, 34 insertions(+)
> > >
> > > diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> > > index d59b4acf183a..24f2e70d5886 100644
> > > --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> > > +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> > > @@ -52,6 +52,18 @@ pio: pinctrl@2000000 {
> > >                         #gpio-cells = <3>;
> > >                         #interrupt-cells = <3>;
> > >
> > > +                       /omit-if-no-ref/
> >
> > Just FYI this likely ends up doing nothing if you also have them
> > referenced through a default pinctrl setting. They end up always
> > referenced and always included. For the D1 series it looks like no
> > peripheral has default pinctrl setting given.
> >
> > We can still keep it though. It would help when future chip variants
> > specify different pinmuxes.
>
> Oops, thanks for pointing that out. I'll try to avoid that mistake in future.
>
> > The compatible string should be the first property. In other sunxi SoC dtsi
> > files, we put the pinctrl just before the "status" property if it's present
> > to specify a default pin muxing.
>
> Oh that makes sense.
>
> >
> > I can fix it up while applying.
>
> Please do!

Applied. Please check here:

https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git/commit/?h=sunxi/dt-for-6.6&id=f05af44f691351bfd954f39ec376666dc5e1b869