Re: [PATCH v4 9/9] ARM: dts: stm32: Add Octavo OSD32MP1-RED board

From: Alexandre TORGUE
Date: Thu Aug 10 2023 - 07:38:04 EST


Hi Sean

On 7/12/23 14:42, Sean Nyekjaer wrote:
Add support for the Octavo OSD32MP1-RED development board.

General features:
- STM32MP157C
- 512MB DDR3
- CAN-FD
- HDMI
- USB-C OTG
- UART

Signed-off-by: Sean Nyekjaer <sean@xxxxxxxxxx>
Reviewed-by: Olivier Moysan <olivier.moysan@xxxxxxxxxxx>
---
Changes since v1:
- Fixed comments from Ahmad

Changes since v2:
- Reordered phandles alfabetically
- Added devicetree to Makefile

Changes since v3:
- Explained the dma disable
- Removed the status ok for hdmi-transmitter

arch/arm/boot/dts/st/Makefile | 3 +-
.../boot/dts/st/stm32mp157c-osd32mp1-red.dts | 226 ++++++++++++++++++
2 files changed, 228 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts


Sorry for my late answer (just back from vacations). I got some build issue:

make W=1 st/stm32mp157c-osd32mp1-red.dtb

DTC arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dtb
arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts:138.4-14: Warning (reg_format): /soc/display-controller@5a001000/port/endpoint@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts:137.28-140.5: Warning (avoid_default_addr_size): /soc/display-controller@5a001000/port/endpoint@0: Relying on default #address-cells value
arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts:137.28-140.5: Warning (avoid_default_addr_size): /soc/display-controller@5a001000/port/endpoint@0: Relying on default #size-cells value
arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dtb: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size'
arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size'
arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts:137.28-140.5: Warning (graph_endpoint): /soc/display-controller@5a001000/port/endpoint@0: graph node '#address-cells' is -1, must be 1
arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts:137.28-140.5: Warning (graph_endpoint): /soc/display-controller@5a001000/port/endpoint@0: graph node '#size-cells' is -1, must be 0


And Yaml verification issue:


make CHECK_DTBS=y st/stm32mp157c-osd32mp1-red.dtb

UPD include/config/kernel.release
LINT Documentation/devicetree/bindings
CHKDT Documentation/devicetree/bindings/processed-schema.json
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml: properties:adi,ext1-burnout-current-nanoamp: '$ref' should not be valid under {'const': '$ref'}
from schema $id: http://devicetree.org/meta-schemas/core.yaml#
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml: properties:adi,ext2-burnout-current-nanoamp: '$ref' should not be valid under {'const': '$ref'}
from schema $id: http://devicetree.org/meta-schemas/core.yaml#
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml: properties:adi,viout-burnout-current-nanoamp: '$ref' should not be valid under {'const': '$ref'}
from schema $id: http://devicetree.org/meta-schemas/core.yaml#
SCHEMA Documentation/devicetree/bindings/processed-schema.json
DTC_CHK arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dtb

/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dtb: audio-controller@4000b000: port:endpoint: Unevaluated properties are not allowed ('format' was unexpected)
from schema $id: http://devicetree.org/schemas/sound/st,stm32-i2s.yaml#
/local/home/frq08678/STLINUX/kernel/my-kernel/stm32/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dtb: audio-controller@4000b000: Unevaluated properties are not allowed ('port' was unexpected)
from schema $id: http://devicetree.org/schemas/sound/st,stm32-i2s.yaml#


I think we recently fixed some of them for ST boards, you could have a look on correction we did.

Regards
Alex


diff --git a/arch/arm/boot/dts/st/Makefile b/arch/arm/boot/dts/st/Makefile
index 44b264c399ec..94feb1f1d569 100644
--- a/arch/arm/boot/dts/st/Makefile
+++ b/arch/arm/boot/dts/st/Makefile
@@ -59,7 +59,8 @@ dtb-$(CONFIG_ARCH_STM32) += \
stm32mp157c-lxa-tac-gen1.dtb \
stm32mp157c-lxa-tac-gen2.dtb \
stm32mp157c-odyssey.dtb \
- stm32mp157c-phycore-stm32mp1-3.dtb
+ stm32mp157c-phycore-stm32mp1-3.dtb \
+ stm32mp157c-osd32mp1-red.dtb
dtb-$(CONFIG_ARCH_U8500) += \
ste-snowball.dtb \
ste-hrefprev60-stuib.dtb \
diff --git a/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts b/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts
new file mode 100644
index 000000000000..2e2751a62aaf
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Geanix ApS 2023 - All Rights Reserved
+ * Author: Sean Nyekjaer <sean@xxxxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15xx-osd32.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+/ {
+ model = "Octavo OSD32MP1 RED board";
+ compatible = "oct,stm32mp157c-osd32-red", "oct,stm32mp15xx-osd32", "st,stm32mp157";
+
+ aliases {
+ serial0 = &uart4;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ led-controller-0 {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "heartbeat";
+ gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&crc1 {
+ status = "okay";
+};
+
+&dts {
+ status = "okay";
+};
+
+&ethernet0 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&ethernet0_rgmii_pins_a>;
+ pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
+ phy-mode = "rgmii-id";
+ max-speed = <1000>;
+ phy-handle = <&phy0>;
+ st,eth-clk-sel;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@3 {
+ reg = <3>;
+ };
+ };
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c1_pins_a>;
+ pinctrl-1 = <&i2c1_sleep_pins_a>;
+ status = "okay";
+ i2c-scl-rising-time-ns = <100>;
+ i2c-scl-falling-time-ns = <7>;
+ /* spare dmas for other usage */
+ /delete-property/dmas;
+ /delete-property/dma-names;
+
+ hdmi-transmitter@39 {
+ compatible = "sil,sii9022";
+ reg = <0x39>;
+ reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpiog>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&ltdc_pins_e>;
+ pinctrl-1 = <&ltdc_sleep_pins_e>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ sii9022_in: endpoint {
+ remote-endpoint = <&ltdc_ep0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ sii9022_tx_endpoint: endpoint {
+ remote-endpoint = <&i2s2_endpoint>;
+ };
+ };
+ };
+ };
+};
+
+&i2s2 {
+ clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc CK_PER>, <&rcc PLL3_R>;
+ clock-names = "pclk", "i2sclk", "x8k", "x11k";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2s2_pins_b>;
+ pinctrl-1 = <&i2s2_sleep_pins_b>;
+ status = "okay";
+
+ i2s2_port: port {
+ i2s2_endpoint: endpoint {
+ remote-endpoint = <&sii9022_tx_endpoint>;
+ format = "i2s";
+ mclk-fs = <256>;
+ };
+ };
+};
+
+&ltdc {
+ status = "okay";
+
+ port {
+ ltdc_ep0_out: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&sii9022_in>;
+ };
+ };
+};
+
+&m_can1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&m_can1_pins_d>;
+ pinctrl-1 = <&m_can1_sleep_pins_d>;
+ status = "okay";
+};
+
+&pwr_regulators {
+ vdd-supply = <&vdd>;
+ vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sdmmc1 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ cd-gpios = <&gpioe 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+ disable-wp;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&v3v3>;
+ status = "okay";
+};
+
+&sdmmc2 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_d>;
+ pinctrl-1 = <&sdmmc2_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_d>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ st,neg-edge;
+ bus-width = <8>;
+ vmmc-supply = <&v3v3>;
+ vqmmc-supply = <&vdd>;
+ mmc-ddr-3_3v;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default", "sleep", "idle";
+ pinctrl-0 = <&uart4_pins_a>;
+ pinctrl-1 = <&uart4_sleep_pins_a>;
+ pinctrl-2 = <&uart4_idle_pins_a>;
+ /* spare dmas for other usage */
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "okay";
+};
+
+&usbh_ehci {
+ phys = <&usbphyc_port0>;
+ phy-names = "usb";
+ status = "okay";
+};
+
+&usbh_ohci {
+ phys = <&usbphyc_port0>;
+ phy-names = "usb";
+ status = "okay";
+};
+
+&usbotg_hs {
+ vbus-supply = <&vbus_otg>;
+};
+
+&usbphyc {
+ status = "okay";
+};
+
+&usbphyc_port0 {
+ phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&vdd_usb>;
+};