Re: [PATCH 3/3] gpio: sprd: Add clear interrupt

[Andy Shevchenko]

On Thu, Aug 10, 2023 at 10:27 AM wenhua lin <wenhua.lin1994@xxxxxxxxx> wrote:
> On Tue, Aug 8, 2023 at 9:25 PM Andy Shevchenko <andy@xxxxxxxxxx> wrote:
> > On Tue, Aug 08, 2023 at 11:31:44AM +0800, Wenhua Lin wrote:
> > > Clear interrupt after set the interrupt type.
> >
> > Why?
> >
> > Can't it be done in the ->init_hw() callback of GPIO IRQ chip?
>
> Hi Andy:
> The initialization state of EIC is high-level trigger. If the external
> level is high and the interrupt condition is met,
> EIC has a latch function. If the module registers the eic interrupt,
> an interrupt will be generated immediately
>  as soon as the eic interrupt is enabled. To solve this problem, our
> processing method is to clear the interrupt
>  once when setting the interrupt trigger type, in order to avoid that
> this interrupt is the last interrupt.

Obvious question, isn't this needed to be added to ->init_hw() as well?

-- 
With Best Regards,
Andy Shevchenko