[RFC][PATCH 16/17] x86/alternatives: Simplify ALTERNATIVE_n()

From: Peter Zijlstra
Date: Wed Aug 09 2023 - 03:27:29 EST


Instead of making increasingly complicated ALTERNATIVE_n()
implementations, use a nested alternative expression.

The only difference between:

ALTERNATIVE_2(oldinst, newinst1, flag1, newinst2, flag2)

and

ALTERNATIVE(ALTERNATIVE(oldinst, newinst1, flag1),
newinst2, flag2)

is that the outer alternative can add additional padding when the
inner alternative is the shorter one, which then results in
alt_instr::instrlen being inconsistent.

However, this is easily remedied since the alt_instr entries will be
consecutive and it is trivial to compute the max(alt_instr::instrlen)
at runtime while patching.

Specifically, after this patch the ALTERNATIVE_2 macro, after CPP
expansion (and manual layout), looks like this:

.macro ALTERNATIVE_2 oldinstr, newinstr1, ft_flags1, newinstr2, ft_flags2
140:

140: \oldinstr ;
141: .skip -(((144f-143f)-(141b-140b)) > 0) * ((144f-143f)-(141b-140b)),0x90 ;
142: .pushsection .altinstructions,"a" ;
altinstr_entry 140b,143f,\ft_flags1,142b-140b,144f-143f ;
.popsection ; .pushsection .altinstr_replacement,"ax" ;
143: \newinstr1 ;
144: .popsection ; ;

141: .skip -(((144f-143f)-(141b-140b)) > 0) * ((144f-143f)-(141b-140b)),0x90 ;
142: .pushsection .altinstructions,"a" ;
altinstr_entry 140b,143f,\ft_flags2,142b-140b,144f-143f ;
.popsection ;
.pushsection .altinstr_replacement,"ax" ;
143: \newinstr2 ;
144: .popsection ;
.endm

The only label that is ambiguous is 140, however they all reference
the same spot, so that doesn't matter.

NOTE: obviously only @oldinstr may be an alternative; making @newinstr
an alternative would mean patching .altinstr_replacement which very
likely isn't what is intended, also the labels will be confused in
that case.

Signed-off-by: Peter Zijlstra (Intel) <peterz@xxxxxxxxxxxxx>
Link: https://lkml.kernel.org/r/20230628104952.GA2439977@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
---
arch/x86/include/asm/alternative.h | 206 ++++++++++---------------------------
arch/x86/kernel/alternative.c | 13 ++
tools/objtool/arch/x86/special.c | 23 ++++
tools/objtool/special.c | 16 +-
4 files changed, 100 insertions(+), 158 deletions(-)

--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -150,102 +150,60 @@ static inline int alternatives_text_rese
}
#endif /* CONFIG_SMP */

-#define b_replacement(num) "664"#num
-#define e_replacement(num) "665"#num
-
-#define alt_end_marker "663"
#define alt_slen "662b-661b"
-#define alt_total_slen alt_end_marker"b-661b"
-#define alt_rlen(num) e_replacement(num)"f-"b_replacement(num)"f"
+#define alt_total_slen "663b-661b"
+#define alt_rlen "665f-664f"

-#define OLDINSTR(oldinstr, num) \
+#define OLDINSTR(oldinstr) \
"# ALT: oldnstr\n" \
"661:\n\t" oldinstr "\n662:\n" \
"# ALT: padding\n" \
- ".skip -(((" alt_rlen(num) ")-(" alt_slen ")) > 0) * " \
- "((" alt_rlen(num) ")-(" alt_slen ")),0x90\n" \
- alt_end_marker ":\n"
-
-/*
- * gas compatible max based on the idea from:
- * http://graphics.stanford.edu/~seander/bithacks.html#IntegerMinOrMax
- *
- * The additional "-" is needed because gas uses a "true" value of -1.
- */
-#define alt_max_short(a, b) "((" a ") ^ (((" a ") ^ (" b ")) & -(-((" a ") < (" b ")))))"
+ ".skip -(((" alt_rlen ")-(" alt_slen ")) > 0) * " \
+ "((" alt_rlen ")-(" alt_slen ")),0x90\n" \
+ "663:\n"

-/*
- * Pad the second replacement alternative with additional NOPs if it is
- * additionally longer than the first replacement alternative.
- */
-#define OLDINSTR_2(oldinstr, num1, num2) \
- "# ALT: oldinstr2\n" \
- "661:\n\t" oldinstr "\n662:\n" \
- "# ALT: padding2\n" \
- ".skip -((" alt_max_short(alt_rlen(num1), alt_rlen(num2)) " - (" alt_slen ")) > 0) * " \
- "(" alt_max_short(alt_rlen(num1), alt_rlen(num2)) " - (" alt_slen ")), 0x90\n" \
- alt_end_marker ":\n"
-
-#define OLDINSTR_3(oldinsn, n1, n2, n3) \
- "# ALT: oldinstr3\n" \
- "661:\n\t" oldinsn "\n662:\n" \
- "# ALT: padding3\n" \
- ".skip -((" alt_max_short(alt_max_short(alt_rlen(n1), alt_rlen(n2)), alt_rlen(n3)) \
- " - (" alt_slen ")) > 0) * " \
- "(" alt_max_short(alt_max_short(alt_rlen(n1), alt_rlen(n2)), alt_rlen(n3)) \
- " - (" alt_slen ")), 0x90\n" \
- alt_end_marker ":\n"
-
-#define ALTINSTR_ENTRY(ft_flags, num) \
+#define ALTINSTR_ENTRY(ft_flags) \
+ ".pushsection .altinstructions,\"a\"\n" \
" .long 661b - .\n" /* label */ \
- " .long " b_replacement(num)"f - .\n" /* new instruction */ \
+ " .long 664f - .\n" /* new instruction */ \
" .4byte " __stringify(ft_flags) "\n" /* feature + flags */ \
" .byte " alt_total_slen "\n" /* source len */ \
- " .byte " alt_rlen(num) "\n" /* replacement len */
-
-#define ALTINSTR_REPLACEMENT(newinstr, num) /* replacement */ \
- "# ALT: replacement " #num "\n" \
- b_replacement(num)":\n\t" newinstr "\n" e_replacement(num) ":\n"
-
-/* alternative assembly primitive: */
-#define ALTERNATIVE(oldinstr, newinstr, ft_flags) \
- OLDINSTR(oldinstr, 1) \
- ".pushsection .altinstructions,\"a\"\n" \
- ALTINSTR_ENTRY(ft_flags, 1) \
- ".popsection\n" \
- ".pushsection .altinstr_replacement, \"ax\"\n" \
- ALTINSTR_REPLACEMENT(newinstr, 1) \
+ " .byte " alt_rlen "\n" /* replacement len */ \
".popsection\n"

-#define ALTERNATIVE_2(oldinstr, newinstr1, ft_flags1, newinstr2, ft_flags2) \
- OLDINSTR_2(oldinstr, 1, 2) \
- ".pushsection .altinstructions,\"a\"\n" \
- ALTINSTR_ENTRY(ft_flags1, 1) \
- ALTINSTR_ENTRY(ft_flags2, 2) \
- ".popsection\n" \
- ".pushsection .altinstr_replacement, \"ax\"\n" \
- ALTINSTR_REPLACEMENT(newinstr1, 1) \
- ALTINSTR_REPLACEMENT(newinstr2, 2) \
+#define ALTINSTR_REPLACEMENT(newinstr) /* replacement */ \
+ ".pushsection .altinstr_replacement, \"ax\"\n" \
+ "# ALT: replacement \n" \
+ "664:\n\t" newinstr "\n 665:\n" \
".popsection\n"

+/*
+ * Define an alternative between two instructions. If @ft_flags is
+ * present, early code in apply_alternatives() replaces @oldinstr with
+ * @newinstr. ".skip" directive takes care of proper instruction padding
+ * in case @newinstr is longer than @oldinstr.
+ *
+ * Notably: @oldinstr may be an ALTERNATIVE() itself, also see
+ * apply_alternatives()
+ */
+#define ALTERNATIVE(oldinstr, newinstr, ft_flags) \
+ OLDINSTR(oldinstr) \
+ ALTINSTR_ENTRY(ft_flags) \
+ ALTINSTR_REPLACEMENT(newinstr)
+
+#define ALTERNATIVE_2(oldinst, newinst1, flag1, newinst2, flag2) \
+ ALTERNATIVE(ALTERNATIVE(oldinst, newinst1, flag1), \
+ newinst2, flag2)
+
/* If @feature is set, patch in @newinstr_yes, otherwise @newinstr_no. */
#define ALTERNATIVE_TERNARY(oldinstr, ft_flags, newinstr_yes, newinstr_no) \
ALTERNATIVE_2(oldinstr, newinstr_no, X86_FEATURE_ALWAYS, \
newinstr_yes, ft_flags)

-#define ALTERNATIVE_3(oldinsn, newinsn1, ft_flags1, newinsn2, ft_flags2, \
- newinsn3, ft_flags3) \
- OLDINSTR_3(oldinsn, 1, 2, 3) \
- ".pushsection .altinstructions,\"a\"\n" \
- ALTINSTR_ENTRY(ft_flags1, 1) \
- ALTINSTR_ENTRY(ft_flags2, 2) \
- ALTINSTR_ENTRY(ft_flags3, 3) \
- ".popsection\n" \
- ".pushsection .altinstr_replacement, \"ax\"\n" \
- ALTINSTR_REPLACEMENT(newinsn1, 1) \
- ALTINSTR_REPLACEMENT(newinsn2, 2) \
- ALTINSTR_REPLACEMENT(newinsn3, 3) \
- ".popsection\n"
+#define ALTERNATIVE_3(oldinst, newinst1, flag1, newinst2, flag2, \
+ newinst3, flag3) \
+ ALTERNATIVE(ALTERNATIVE_2(oldinst, newinst1, flag1, newinst2, flag2), \
+ newinst3, flag3)

/*
* Alternative instructions for different CPU types or capabilities.
@@ -370,6 +328,21 @@ static inline int alternatives_text_rese
.byte \alt_len
.endm

+#define __ALTERNATIVE(oldinst, newinst, flag) \
+140: \
+ oldinst ; \
+141: \
+ .skip -(((144f-143f)-(141b-140b)) > 0) * ((144f-143f)-(141b-140b)),0x90 ;\
+142: \
+ .pushsection .altinstructions,"a" ; \
+ altinstr_entry 140b,143f,flag,142b-140b,144f-143f ; \
+ .popsection ; \
+ .pushsection .altinstr_replacement,"ax" ; \
+143: \
+ newinst ; \
+144: \
+ .popsection ;
+
/*
* Define an alternative between two instructions. If @feature is
* present, early code in apply_alternatives() replaces @oldinstr with
@@ -377,88 +350,23 @@ static inline int alternatives_text_rese
* in case @newinstr is longer than @oldinstr.
*/
.macro ALTERNATIVE oldinstr, newinstr, ft_flags
-140:
- \oldinstr
-141:
- .skip -(((144f-143f)-(141b-140b)) > 0) * ((144f-143f)-(141b-140b)),0x90
-142:
-
- .pushsection .altinstructions,"a"
- altinstr_entry 140b,143f,\ft_flags,142b-140b,144f-143f
- .popsection
-
- .pushsection .altinstr_replacement,"ax"
-143:
- \newinstr
-144:
- .popsection
+ __ALTERNATIVE(\oldinstr, \newinstr, \ft_flags)
.endm

-#define old_len 141b-140b
-#define new_len1 144f-143f
-#define new_len2 145f-144f
-#define new_len3 146f-145f
-
-/*
- * gas compatible max based on the idea from:
- * http://graphics.stanford.edu/~seander/bithacks.html#IntegerMinOrMax
- *
- * The additional "-" is needed because gas uses a "true" value of -1.
- */
-#define alt_max_2(a, b) ((a) ^ (((a) ^ (b)) & -(-((a) < (b)))))
-#define alt_max_3(a, b, c) (alt_max_2(alt_max_2(a, b), c))
-
-
/*
* Same as ALTERNATIVE macro above but for two alternatives. If CPU
* has @feature1, it replaces @oldinstr with @newinstr1. If CPU has
* @feature2, it replaces @oldinstr with @feature2.
*/
.macro ALTERNATIVE_2 oldinstr, newinstr1, ft_flags1, newinstr2, ft_flags2
-140:
- \oldinstr
-141:
- .skip -((alt_max_2(new_len1, new_len2) - (old_len)) > 0) * \
- (alt_max_2(new_len1, new_len2) - (old_len)),0x90
-142:
-
- .pushsection .altinstructions,"a"
- altinstr_entry 140b,143f,\ft_flags1,142b-140b,144f-143f
- altinstr_entry 140b,144f,\ft_flags2,142b-140b,145f-144f
- .popsection
-
- .pushsection .altinstr_replacement,"ax"
-143:
- \newinstr1
-144:
- \newinstr2
-145:
- .popsection
+ __ALTERNATIVE(__ALTERNATIVE(\oldinstr, \newinstr1, \ft_flags1),
+ \newinstr2, \ft_flags2)
.endm

.macro ALTERNATIVE_3 oldinstr, newinstr1, ft_flags1, newinstr2, ft_flags2, newinstr3, ft_flags3
-140:
- \oldinstr
-141:
- .skip -((alt_max_3(new_len1, new_len2, new_len3) - (old_len)) > 0) * \
- (alt_max_3(new_len1, new_len2, new_len3) - (old_len)),0x90
-142:
-
- .pushsection .altinstructions,"a"
- altinstr_entry 140b,143f,\ft_flags1,142b-140b,144f-143f
- altinstr_entry 140b,144f,\ft_flags2,142b-140b,145f-144f
- altinstr_entry 140b,145f,\ft_flags3,142b-140b,146f-145f
- .popsection
-
- .pushsection .altinstr_replacement,"ax"
-143:
- \newinstr1
-144:
- \newinstr2
-145:
- \newinstr3
-146:
- .popsection
+ __ALTERNATIVE(__ALTERNATIVE(__ALTERNATIVE(\oldinstr, \newinstr1, \ft_flags1),
+ \newinstr2, \ft_flags2),
+ \newinstr3, \ft_flags3)
.endm

/* If @feature is set, patch in @newinstr_yes, otherwise @newinstr_no. */
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -398,7 +398,7 @@ apply_relocation(u8 *buf, size_t len, u8
void __init_or_module noinline apply_alternatives(struct alt_instr *start,
struct alt_instr *end)
{
- struct alt_instr *a;
+ struct alt_instr *a, *b;
u8 *instr, *replacement;
u8 insn_buff[MAX_PATCH_LEN];

@@ -415,6 +415,17 @@ void __init_or_module noinline apply_alt
for (a = start; a < end; a++) {
int insn_buff_sz = 0;

+ /*
+ * In case of nested ALTERNATIVE()s the outer alternative might
+ * add more padding. To ensure consistent patching find the max
+ * padding for all alt_instr entries for this site (nested
+ * alternatives result in consecutive entries).
+ */
+ for (b = a+1; b < end && b->instr_offset == a->instr_offset; b++) {
+ u8 len = max(a->instrlen, b->instrlen);
+ a->instrlen = b->instrlen = len;
+ }
+
instr = (u8 *)&a->instr_offset + a->instr_offset;
replacement = (u8 *)&a->repl_offset + a->repl_offset;
BUG_ON(a->instrlen > sizeof(insn_buff));
--- a/tools/objtool/arch/x86/special.c
+++ b/tools/objtool/arch/x86/special.c
@@ -9,6 +9,29 @@

void arch_handle_alternative(unsigned short feature, struct special_alt *alt)
{
+ static struct special_alt *group, *prev;
+
+ /*
+ * Recompute orig_len for nested ALTERNATIVE()s.
+ */
+ if (group && group->orig_sec == alt->orig_sec &&
+ group->orig_off == alt->orig_off) {
+
+ struct special_alt *iter = group;
+ for (;;) {
+ unsigned int len = max(iter->orig_len, alt->orig_len);
+ iter->orig_len = alt->orig_len = len;
+
+ if (iter == prev)
+ break;
+
+ iter = list_next_entry(iter, list);
+ }
+
+ } else group = alt;
+
+ prev = alt;
+
switch (feature) {
case X86_FEATURE_SMAP:
/*
--- a/tools/objtool/special.c
+++ b/tools/objtool/special.c
@@ -84,6 +84,14 @@ static int get_alt_entry(struct elf *elf
entry->new_len);
}

+ orig_reloc = find_reloc_by_dest(elf, sec, offset + entry->orig);
+ if (!orig_reloc) {
+ WARN_FUNC("can't find orig reloc", sec, offset + entry->orig);
+ return -1;
+ }
+
+ reloc_to_sec_off(orig_reloc, &alt->orig_sec, &alt->orig_off);
+
if (entry->feature) {
unsigned short feature;

@@ -94,14 +102,6 @@ static int get_alt_entry(struct elf *elf
arch_handle_alternative(feature, alt);
}

- orig_reloc = find_reloc_by_dest(elf, sec, offset + entry->orig);
- if (!orig_reloc) {
- WARN_FUNC("can't find orig reloc", sec, offset + entry->orig);
- return -1;
- }
-
- reloc_to_sec_off(orig_reloc, &alt->orig_sec, &alt->orig_off);
-
if (!entry->group || alt->new_len) {
new_reloc = find_reloc_by_dest(elf, sec, offset + entry->new);
if (!new_reloc) {