Re: [PATCH v7 3/6] media: starfive: camss: Add basic driver
From: Jack Zhu
Date: Mon Jul 31 2023 - 23:24:36 EST
Hi Laurent,
Thank you for your comments.
On 2023/7/27 19:33, Laurent Pinchart wrote:
> Hi Jack,
>
> Thank you for the patch.
>
> On Mon, Jun 19, 2023 at 07:28:35PM +0800, Jack Zhu wrote:
>> Add basic platform driver for StarFive Camera Subsystem.
>>
>> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
>> Signed-off-by: Jack Zhu <jack.zhu@xxxxxxxxxxxxxxxx>
>> ---
>> MAINTAINERS | 1 +
>> drivers/media/platform/Kconfig | 1 +
>> drivers/media/platform/Makefile | 1 +
>> drivers/media/platform/starfive/Kconfig | 5 +
>> drivers/media/platform/starfive/Makefile | 2 +
>> drivers/media/platform/starfive/camss/Kconfig | 16 +
>> .../media/platform/starfive/camss/Makefile | 8 +
>> .../media/platform/starfive/camss/stf_camss.c | 338 ++++++++++++++++++
>> .../media/platform/starfive/camss/stf_camss.h | 146 ++++++++
>> 9 files changed, 518 insertions(+)
>> create mode 100644 drivers/media/platform/starfive/Kconfig
>> create mode 100644 drivers/media/platform/starfive/Makefile
>> create mode 100644 drivers/media/platform/starfive/camss/Kconfig
>> create mode 100644 drivers/media/platform/starfive/camss/Makefile
>> create mode 100644 drivers/media/platform/starfive/camss/stf_camss.c
>> create mode 100644 drivers/media/platform/starfive/camss/stf_camss.h
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 71291dc58671..62f9e3593eab 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -20077,6 +20077,7 @@ L: linux-media@xxxxxxxxxxxxxxx
>> S: Maintained
>> F: Documentation/admin-guide/media/starfive_camss.rst
>> F: Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
>> +F: drivers/media/platform/starfive/camss
>>
>> STARFIVE DEVICETREES
>> M: Emil Renner Berthing <kernel@xxxxxxxx>
>> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
>> index ee579916f874..627eaa0ab3ee 100644
>> --- a/drivers/media/platform/Kconfig
>> +++ b/drivers/media/platform/Kconfig
>> @@ -80,6 +80,7 @@ source "drivers/media/platform/renesas/Kconfig"
>> source "drivers/media/platform/rockchip/Kconfig"
>> source "drivers/media/platform/samsung/Kconfig"
>> source "drivers/media/platform/st/Kconfig"
>> +source "drivers/media/platform/starfive/Kconfig"
>> source "drivers/media/platform/sunxi/Kconfig"
>> source "drivers/media/platform/ti/Kconfig"
>> source "drivers/media/platform/verisilicon/Kconfig"
>> diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
>> index 5453bb868e67..5a038498a370 100644
>> --- a/drivers/media/platform/Makefile
>> +++ b/drivers/media/platform/Makefile
>> @@ -23,6 +23,7 @@ obj-y += renesas/
>> obj-y += rockchip/
>> obj-y += samsung/
>> obj-y += st/
>> +obj-y += starfive/
>> obj-y += sunxi/
>> obj-y += ti/
>> obj-y += verisilicon/
>> diff --git a/drivers/media/platform/starfive/Kconfig b/drivers/media/platform/starfive/Kconfig
>> new file mode 100644
>> index 000000000000..7955c2a0a4a3
>> --- /dev/null
>> +++ b/drivers/media/platform/starfive/Kconfig
>> @@ -0,0 +1,5 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +
>> +comment "StarFive media platform drivers"
>> +
>> +source "drivers/media/platform/starfive/camss/Kconfig"
>> diff --git a/drivers/media/platform/starfive/Makefile b/drivers/media/platform/starfive/Makefile
>> new file mode 100644
>> index 000000000000..4639fa1bca32
>> --- /dev/null
>> +++ b/drivers/media/platform/starfive/Makefile
>> @@ -0,0 +1,2 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +obj-y += camss/
>> diff --git a/drivers/media/platform/starfive/camss/Kconfig b/drivers/media/platform/starfive/camss/Kconfig
>> new file mode 100644
>> index 000000000000..dafe1d24324b
>> --- /dev/null
>> +++ b/drivers/media/platform/starfive/camss/Kconfig
>> @@ -0,0 +1,16 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +config VIDEO_STARFIVE_CAMSS
>> + tristate "Starfive Camera Subsystem driver"
>> + depends on V4L_PLATFORM_DRIVERS
>> + depends on VIDEO_DEV && OF
>> + depends on HAS_DMA
>
> You need to depend on PM, otherwise the runtime PM operations will be
> no-ops and the driver won't work as clocks won't be enabled.
>
OK, I will add dependency.
>> + select MEDIA_CONTROLLER
>> + select VIDEO_V4L2_SUBDEV_API
>> + select VIDEOBUF2_DMA_CONTIG
>> + select V4L2_FWNODE
>> + help
>> + Enable this to support for the Starfive Camera subsystem
>> + found on Starfive JH7110 SoC.
>> +
>> + To compile this driver as a module, choose M here: the
>> + module will be called stf-camss.
>> diff --git a/drivers/media/platform/starfive/camss/Makefile b/drivers/media/platform/starfive/camss/Makefile
>> new file mode 100644
>> index 000000000000..d56ddd078a71
>> --- /dev/null
>> +++ b/drivers/media/platform/starfive/camss/Makefile
>> @@ -0,0 +1,8 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +#
>> +# Makefile for StarFive Camera Subsystem driver
>> +#
>> +
>> +starfive-camss-objs += stf_camss.o
>> +
>> +obj-$(CONFIG_VIDEO_STARFIVE_CAMSS) += starfive-camss.o
>> diff --git a/drivers/media/platform/starfive/camss/stf_camss.c b/drivers/media/platform/starfive/camss/stf_camss.c
>> new file mode 100644
>> index 000000000000..dc2b5dba7bd4
>> --- /dev/null
>> +++ b/drivers/media/platform/starfive/camss/stf_camss.c
>> @@ -0,0 +1,338 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * stf_camss.c
>> + *
>> + * Starfive Camera Subsystem driver
>> + *
>> + * Copyright (C) 2021-2023 StarFive Technology Co., Ltd.
>> + */
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_graph.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/videodev2.h>
>> +#include <media/v4l2-fwnode.h>
>> +#include <media/v4l2-mc.h>
>> +
>> +#include "stf_camss.h"
>> +
>> +static const char * const stfcamss_clocks[] = {
>> + "clk_apb_func",
>> + "clk_wrapper_clk_c",
>> + "clk_dvp_inv",
>> + "clk_axiwr",
>> + "clk_mipi_rx0_pxl",
>> + "clk_ispcore_2x",
>> + "clk_isp_axi",
>> +};
>> +
>> +static const char * const stfcamss_resets[] = {
>> + "rst_wrapper_p",
>> + "rst_wrapper_c",
>> + "rst_axird",
>> + "rst_axiwr",
>> + "rst_isp_top_n",
>> + "rst_isp_top_axi",
>> +};
>> +
>> +static int stfcamss_get_mem_res(struct platform_device *pdev,
>> + struct stfcamss *stfcamss)
>> +{
>> + stfcamss->syscon_base =
>> + devm_platform_ioremap_resource_byname(pdev, "syscon");
>> + if (IS_ERR(stfcamss->syscon_base))
>> + return PTR_ERR(stfcamss->syscon_base);
>> +
>> + stfcamss->isp_base =
>> + devm_platform_ioremap_resource_byname(pdev, "isp");
>
> This hols on a single line:
>
> stfcamss->isp_base = devm_platform_ioremap_resource_byname(pdev, "isp");
>
> I would do the same above too.
>
OK, I will modify.
>> + if (IS_ERR(stfcamss->isp_base))
>> + return PTR_ERR(stfcamss->isp_base);
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * stfcamss_of_parse_endpoint_node - Parse port endpoint node
>> + * @dev: Device
>> + * @node: Device node to be parsed
>> + * @csd: Parsed data from port endpoint node
>> + *
>> + * Return 0 on success or a negative error code on failure
>> + */
>> +static int stfcamss_of_parse_endpoint_node(struct device *dev,
>
> For consistency, pass the stfcamss pointer to this function, not the
> struct device.
>
OK, will fix it.
>> + struct device_node *node,
>> + struct stfcamss_async_subdev *csd)
>> +{
>> + struct v4l2_fwnode_endpoint vep = { { 0 } };
>> +
>> + v4l2_fwnode_endpoint_parse(of_fwnode_handle(node), &vep);
>> + dev_dbg(dev, "vep.base.port = %d, id = %d\n",
>> + vep.base.port, vep.base.id);
>
> There are debug messages in v4l2_fwnode_endpoint_parse() already, you
> can drop this one.
>
OK, will drop it.
>> +
>> + csd->port = vep.base.port;
>> +
>> + return 0;
>> +}
>> +
>> +/*
>> + * stfcamss_of_parse_ports - Parse ports node
>> + * @stfcamss: STFCAMSS device
>> + *
>> + * Return number of "port" nodes found in "ports" node
>> + */
>> +static int stfcamss_of_parse_ports(struct stfcamss *stfcamss)
>> +{
>> + struct device *dev = stfcamss->dev;
>> + struct device_node *node = NULL;
>> + int ret, num_subdevs = 0;
>> +
>> + for_each_endpoint_of_node(dev->of_node, node) {
>
> for_each_endpoint_of_node(stfcamss->dev->of_node, node) {
>
> and drop the local dev variable.
>
OK, will modify it.
>> + struct stfcamss_async_subdev *csd;
>> +
>> + if (!of_device_is_available(node))
>> + continue;
>> +
>> + csd = v4l2_async_nf_add_fwnode_remote(&stfcamss->notifier,
>> + of_fwnode_handle(node),
>> + struct stfcamss_async_subdev);
>> + if (IS_ERR(csd)) {
>> + ret = PTR_ERR(csd);
>> + goto err_cleanup;
>> + }
>> +
>> + ret = stfcamss_of_parse_endpoint_node(dev, node, csd);
>> + if (ret < 0)
>> + goto err_cleanup;
>> +
>> + num_subdevs++;
>> + }
>> +
>> + return num_subdevs;
>> +
>> +err_cleanup:
>> + of_node_put(node);
>> + return ret;
>> +}
>> +
>> +static int stfcamss_subdev_notifier_bound(struct v4l2_async_notifier *async,
>> + struct v4l2_subdev *subdev,
>> + struct v4l2_async_subdev *asd)
>> +{
>> + struct media_pad *pad[STF_PADS_NUM];
>> + unsigned int i, pad_num = 0;
>> +
>> + for (i = 0; i < pad_num; ++i) {
>
> The loop never runs as pad_num is 0. This is modified in subsequent
> patches in the series, but it makes it hard to review the patches
> individually. Is there any way you could restructure the series to avoid
> this ?
>
OK, I will modify the code.
>> + int ret;
>> +
>> + ret = v4l2_create_fwnode_links_to_pad(subdev, pad[i], 0);
>> + if (ret < 0)
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int stfcamss_subdev_notifier_complete(struct v4l2_async_notifier *ntf)
>> +{
>> + struct stfcamss *stfcamss =
>> + container_of(ntf, struct stfcamss, notifier);
>> +
>> + return v4l2_device_register_subdev_nodes(&stfcamss->v4l2_dev);
>> +}
>> +
>> +static const struct v4l2_async_notifier_operations
>> +stfcamss_subdev_notifier_ops = {
>> + .bound = stfcamss_subdev_notifier_bound,
>> + .complete = stfcamss_subdev_notifier_complete,
>> +};
>> +
>> +static const struct media_device_ops stfcamss_media_ops = {
>> + .link_notify = v4l2_pipeline_link_notify,
>
> You can drop this, link management notification only serves to call the
> subdev .s_power() operations, which are a deprecated API.
>
OK, will drop it.
>> +};
>> +
>> +static void stfcamss_mc_init(struct platform_device *pdev,
>> + struct stfcamss *stfcamss)
>> +{
>> + stfcamss->media_dev.dev = stfcamss->dev;
>> + strscpy(stfcamss->media_dev.model, "Starfive Camera Subsystem",
>> + sizeof(stfcamss->media_dev.model));
>> + stfcamss->media_dev.ops = &stfcamss_media_ops;
>> + media_device_init(&stfcamss->media_dev);
>> +
>> + stfcamss->v4l2_dev.mdev = &stfcamss->media_dev;
>> +}
>> +
>> +/*
>> + * stfcamss_probe - Probe STFCAMSS platform device
>> + * @pdev: Pointer to STFCAMSS platform device
>> + *
>> + * Return 0 on success or a negative error code on failure
>> + */
>> +static int stfcamss_probe(struct platform_device *pdev)
>> +{
>> + struct stfcamss *stfcamss;
>> + struct device *dev = &pdev->dev;
>> + int ret, num_subdevs;
>> + unsigned int i;
>> +
>> + stfcamss = devm_kzalloc(dev, sizeof(*stfcamss), GFP_KERNEL);
>> + if (!stfcamss)
>> + return -ENOMEM;
>> +
>> + for (i = 0; i < ARRAY_SIZE(stfcamss->irq); ++i) {
>> + stfcamss->irq[i] = platform_get_irq(pdev, i);
>> + if (stfcamss->irq[i] < 0)
>> + return dev_err_probe(&pdev->dev, stfcamss->irq[i],
>> + "Failed to get irq%d", i);
>> + }
>> +
>> + stfcamss->nclks = ARRAY_SIZE(stfcamss->sys_clk);
>> + for (i = 0; i < stfcamss->nclks; ++i)
>> + stfcamss->sys_clk[i].id = stfcamss_clocks[i];
>> + ret = devm_clk_bulk_get(dev, stfcamss->nclks, stfcamss->sys_clk);
>> + if (ret) {
>> + dev_err(dev, "Failed to get clk controls\n");
>> + return ret;
>> + }
>> +
>> + stfcamss->nrsts = ARRAY_SIZE(stfcamss->sys_rst);
>> + for (i = 0; i < stfcamss->nrsts; ++i)
>> + stfcamss->sys_rst[i].id = stfcamss_resets[i];
>> + ret = devm_reset_control_bulk_get_shared(dev, stfcamss->nrsts,
>> + stfcamss->sys_rst);
>> + if (ret) {
>> + dev_err(dev, "Failed to get reset controls\n");
>> + return ret;
>> + }
>> +
>> + ret = stfcamss_get_mem_res(pdev, stfcamss);
>> + if (ret) {
>> + dev_err(dev, "Could not map registers\n");
>> + return ret;
>> + }
>> +
>> + stfcamss->dev = dev;
>
> Move this right after allocating stfcamss, and drop the pdev argument to
> stfcamss_get_mem_res(). The platform device can be retrieved in the
> function using to_platform_device().
>
OK, I will modify.
>> + platform_set_drvdata(pdev, stfcamss);
>> +
>> + v4l2_async_nf_init(&stfcamss->notifier);
>> +
>> + num_subdevs = stfcamss_of_parse_ports(stfcamss);
>> + if (num_subdevs < 0) {
>> + ret = -ENODEV;
>
> An error message would be useful, silent errors are hard to debug.
>
OK, will add error printing information.
>> + goto err_cleanup_notifier;
>> + }
>> +
>> + stfcamss_mc_init(pdev, stfcamss);
>> +
>> + ret = v4l2_device_register(stfcamss->dev, &stfcamss->v4l2_dev);
>> + if (ret < 0) {
>> + dev_err(dev, "Failed to register V4L2 device: %d\n", ret);
>> + goto err_cleanup_notifier;
>> + }
>> +
>> + ret = media_device_register(&stfcamss->media_dev);
>> + if (ret) {
>> + dev_err(dev, "Failed to register media device: %d\n", ret);
>> + goto err_unregister_device;
>> + }
>> +
>> + pm_runtime_enable(dev);
>
> Would it be useful to enable autosuspend too, to avoid expensive
> suspend/resume cycles when userspace wants to briefly stop capture and
> restart it immediately ?
>
It seems rare to use autosuspend in the Linux camera system.
>> +
>> + stfcamss->notifier.ops = &stfcamss_subdev_notifier_ops;
>> + ret = v4l2_async_nf_register(&stfcamss->v4l2_dev, &stfcamss->notifier);
>> + if (ret) {
>> + dev_err(dev, "Failed to register async subdev nodes: %d\n",
>> + ret);
>> + goto err_unregister_media_dev;
>
> You need to disable runtime PM in this error path.
>
OK, will fix it.
>> + }
>> +
>> + return 0;
>> +
>> +err_unregister_media_dev:
>> + media_device_unregister(&stfcamss->media_dev);
>> +err_unregister_device:
>> + v4l2_device_unregister(&stfcamss->v4l2_dev);
>> +err_cleanup_notifier:
>> + v4l2_async_nf_cleanup(&stfcamss->notifier);
>> + return ret;
>> +}
>> +
>> +/*
>> + * stfcamss_remove - Remove STFCAMSS platform device
>> + * @pdev: Pointer to STFCAMSS platform device
>> + *
>> + * Always returns 0.
>> + */
>> +static int stfcamss_remove(struct platform_device *pdev)
>> +{
>> + struct stfcamss *stfcamss = platform_get_drvdata(pdev);
>> +
>> + v4l2_device_unregister(&stfcamss->v4l2_dev);
>> + media_device_cleanup(&stfcamss->media_dev);
>> + pm_runtime_disable(&pdev->dev);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id stfcamss_of_match[] = {
>> + { .compatible = "starfive,jh7110-camss" },
>> + { /* sentinel */ },
>> +};
>> +
>> +MODULE_DEVICE_TABLE(of, stfcamss_of_match);
>> +
>> +static int __maybe_unused stfcamss_runtime_suspend(struct device *dev)
>> +{
>> + struct stfcamss *stfcamss = dev_get_drvdata(dev);
>> +
>> + reset_control_assert(stfcamss->sys_rst[STF_RST_AXIWR].rstc);
>> + reset_control_assert(stfcamss->sys_rst[STF_RST_ISP_TOP_AXI].rstc);
>> + reset_control_assert(stfcamss->sys_rst[STF_RST_ISP_TOP_N].rstc);
>
> The reset bulk API (reset_control_bulk_assert() and
> reset_control_bulk_deassert() for below) would help.
OK, I will use the bulk API.
>
>> + clk_disable_unprepare(stfcamss->sys_clk[STF_CLK_ISP_AXI].clk);
>> + clk_disable_unprepare(stfcamss->sys_clk[STF_CLK_ISPCORE_2X].clk);
>
> Same for clocks, possibly.
>
>> +
>> + return 0;
>> +}
>> +
>> +static int __maybe_unused stfcamss_runtime_resume(struct device *dev)
>> +{
>> + struct stfcamss *stfcamss = dev_get_drvdata(dev);
>> + int ret;
>> +
>> + ret = clk_prepare_enable(stfcamss->sys_clk[STF_CLK_ISPCORE_2X].clk);
>> + if (ret)
>> + return ret;
>> +
>> + ret = clk_prepare_enable(stfcamss->sys_clk[STF_CLK_ISP_AXI].clk);
>> + if (ret)
>
> You need to disable the STF_CLK_ISPCORE_2X clock here.
>
OK, I will fix it.
>> + return ret;
>> +
>> + reset_control_deassert(stfcamss->sys_rst[STF_RST_ISP_TOP_N].rstc);
>> + reset_control_deassert(stfcamss->sys_rst[STF_RST_ISP_TOP_AXI].rstc);
>> + reset_control_deassert(stfcamss->sys_rst[STF_RST_AXIWR].rstc);
>
> These calls can fail too.
>
> Error handling would be easier with the reset and clk bulk APIs.
>
OK, I will modify it.
>> +
>> + return 0;
>> +}
>> +
>> +static const struct dev_pm_ops stfcamss_pm_ops = {
>> + SET_RUNTIME_PM_OPS(stfcamss_runtime_suspend,
>> + stfcamss_runtime_resume,
>> + NULL)
>> +};
>> +
>> +static struct platform_driver stfcamss_driver = {
>> + .probe = stfcamss_probe,
>> + .remove = stfcamss_remove,
>> + .driver = {
>> + .name = "starfive-camss",
>> + .pm = &stfcamss_pm_ops,
>> + .of_match_table = of_match_ptr(stfcamss_of_match),
>
> The driver depends on OF, so let's drop the of_match_ptr().
>
OK, will drop it.
>> + },
>> +};
>> +
>> +module_platform_driver(stfcamss_driver);
>> +
>> +MODULE_AUTHOR("StarFive Corporation");
>> +MODULE_DESCRIPTION("StarFive Camera Subsystem driver");
>> +MODULE_LICENSE("GPL");
>> diff --git a/drivers/media/platform/starfive/camss/stf_camss.h b/drivers/media/platform/starfive/camss/stf_camss.h
>> new file mode 100644
>> index 000000000000..15c4f34b9054
>> --- /dev/null
>> +++ b/drivers/media/platform/starfive/camss/stf_camss.h
>> @@ -0,0 +1,146 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * stf_camss.h
>> + *
>> + * Starfive Camera Subsystem driver
>> + *
>> + * Copyright (C) 2021-2023 StarFive Technology Co., Ltd.
>> + */
>> +
>> +#ifndef STF_CAMSS_H
>> +#define STF_CAMSS_H
>> +
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/reset.h>
>> +#include <media/media-device.h>
>> +#include <media/media-entity.h>
>> +#include <media/v4l2-async.h>
>> +#include <media/v4l2-device.h>
>> +
>> +#define STF_DVP_NAME "stf_dvp"
>> +#define STF_CSI_NAME "cdns_csi2rx"
>> +#define STF_ISP_NAME "stf_isp"
>> +#define STF_VIN_NAME "stf_vin"
>> +
>> +#define STF_PAD_SINK 0
>> +#define STF_PAD_SRC 1
>> +#define STF_PADS_NUM 2
>> +
>> +enum stf_port_num {
>> + STF_PORT_DVP = 0,
>> + STF_PORT_CSI2RX
>> +};
>> +
>> +enum stf_clk {
>> + STF_CLK_APB_FUNC = 0,
>> + STF_CLK_WRAPPER_CLK_C,
>> + STF_CLK_DVP_INV,
>> + STF_CLK_AXIWR,
>> + STF_CLK_MIPI_RX0_PXL,
>> + STF_CLK_ISPCORE_2X,
>> + STF_CLK_ISP_AXI,
>> + STF_CLK_NUM
>> +};
>> +
>> +enum stf_rst {
>> + STF_RST_WRAPPER_P = 0,
>> + STF_RST_WRAPPER_C,
>> + STF_RST_AXIRD,
>> + STF_RST_AXIWR,
>> + STF_RST_ISP_TOP_N,
>> + STF_RST_ISP_TOP_AXI,
>> + STF_RST_NUM
>> +};
>> +
>> +enum stf_irq {
>> + STF_IRQ_VINWR = 0,
>> + STF_IRQ_ISP,
>> + STF_IRQ_ISPCSIL,
>> + STF_IRQ_NUM
>> +};
>> +
>> +struct stfcamss {
>> + struct v4l2_device v4l2_dev;
>> + struct media_device media_dev;
>> + struct media_pipeline pipe;
>> + struct device *dev;
>> + struct v4l2_async_notifier notifier;
>> + void __iomem *syscon_base;
>> + void __iomem *isp_base;
>> + int irq[STF_IRQ_NUM];
>> + struct clk_bulk_data sys_clk[STF_CLK_NUM];
>> + int nclks;
>> + struct reset_control_bulk_data sys_rst[STF_RST_NUM];
>> + int nrsts;
>> +};
>> +
>> +struct stfcamss_async_subdev {
>> + struct v4l2_async_subdev asd; /* must be first */
>> + enum stf_port_num port;
>> +};
>> +
>> +static inline u32 stf_isp_reg_read(struct stfcamss *stfcamss, u32 reg)
>> +{
>> + return ioread32(stfcamss->isp_base + reg);
>> +}
>> +
>> +static inline void stf_isp_reg_write(struct stfcamss *stfcamss,
>> + u32 reg, u32 val)
>> +{
>> + iowrite32(val, stfcamss->isp_base + reg);
>> +}
>> +
>> +static inline void stf_isp_reg_write_delay(struct stfcamss *stfcamss,
>> + u32 reg, u32 val, u32 delay)
>> +{
>> + iowrite32(val, stfcamss->isp_base + reg);
>> + usleep_range(1000 * delay, 1000 * delay + 100);
>> +}
>> +
>> +static inline void stf_isp_reg_set_bit(struct stfcamss *stfcamss,
>> + u32 reg, u32 mask, u32 val)
>> +{
>> + u32 value;
>> +
>> + value = ioread32(stfcamss->isp_base + reg) & ~mask;
>> + val &= mask;
>> + val |= value;
>> + iowrite32(val, stfcamss->isp_base + reg);
>> +}
>> +
>> +static inline void stf_isp_reg_set(struct stfcamss *stfcamss, u32 reg, u32 mask)
>> +{
>> + iowrite32(ioread32(stfcamss->isp_base + reg) | mask,
>> + stfcamss->isp_base + reg);
>> +}
>> +
>> +static inline u32 stf_syscon_reg_read(struct stfcamss *stfcamss, u32 reg)
>> +{
>> + return ioread32(stfcamss->syscon_base + reg);
>> +}
>> +
>> +static inline void stf_syscon_reg_write(struct stfcamss *stfcamss,
>> + u32 reg, u32 val)
>> +{
>> + iowrite32(val, stfcamss->syscon_base + reg);
>> +}
>> +
>> +static inline void stf_syscon_reg_set_bit(struct stfcamss *stfcamss,
>> + u32 reg, u32 bit_mask)
>> +{
>> + u32 value;
>> +
>> + value = ioread32(stfcamss->syscon_base + reg);
>> + iowrite32(value | bit_mask, stfcamss->syscon_base + reg);
>> +}
>> +
>> +static inline void stf_syscon_reg_clear_bit(struct stfcamss *stfcamss,
>> + u32 reg, u32 bit_mask)
>> +{
>> + u32 value;
>> +
>> + value = ioread32(stfcamss->syscon_base + reg);
>> + iowrite32(value & ~bit_mask, stfcamss->syscon_base + reg);
>> +}
>> +#endif /* STF_CAMSS_H */
>
--
Regards,
Jack Zhu