Re: [PATCH v1 3/3] riscv: dts: allwinner: d1: Add QSPI pins node for pinmux PC port

[Maxim Kiselev]

пн, 31 июл. 2023 г. в 01:30, Jernej Škrabec <jernej.skrabec@xxxxxxxxx>:
>
> Dne sobota, 24. junij 2023 ob 15:16:24 CEST je Maksim Kiselev napisal(a):
> > Add pinmux node that describes pins on PC port which required for
> > QSPI mode.
> >
> > Signed-off-by: Maksim Kiselev <bigunclemax@xxxxxxxxx>
> > ---
> >  arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 7 +++++++
> >  1 file changed, 7 insertions(+)
> >
> > diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> > b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi index
> > 1bb1e5cae602..9f754dd03d85 100644
> > --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> > +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> > @@ -131,6 +131,13 @@ uart3_pb_pins: uart3-pb-pins {
> >                               pins = "PB6", "PB7";
> >                               function = "uart3";
> >                       };
> > +
> > +                     /omit-if-no-ref/
> > +                     qspi0_pc_pins: qspi0-pc-pins {
> > +                             pins = "PC2", "PC3", "PC4", "PC5",
> "PC6",
> > +                                    "PC7";
> > +                             function = "spi0";
> > +                     };
>
> Sorry for late review, but it seems I'm missing something. D1 manual says
> those are pins for ordinary SPI, with HOLD and WP signals. Can they be
> repurposed for quad SPI?
>
Yes, they can. Here is a quote from D1 datasheet (9.3.3.8 SPI
Quad-Input/Quad-Output Mode):
"Using the quad mode allows data to be transferred to or from the
device at 4 times the rate of standard single mode, the data can be
read
at fast speed using four data bits (MOSI, MISO, IO2 (WP#) and IO3
(HOLD#)) at the same time."