[next-20230731] Kdump fails to capture vmcore (powerpc)
From: Sachin Sant
Date: Mon Jul 31 2023 - 10:12:14 EST
Kernel Crash dump(kdump) and firmware assisted dump on powerpc
fails to capture vmcore on recent linux-next builds.
Starting Kdump Vmcore Save Service...
systemd[1]: Starting Kdump Vmcore Save Service...
kdump[599]: Kdump is using the default log level(3).
kdump[635]: saving to /sysroot/var/crash/127.0.0.1-2023-07-31-09:01:28/
kdump[639]: Remounting the dump target in rw mode.
kdump[643]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2023-07-31-09:01:28/
kdump[649]: saving vmcore-dmesg.txt complete
kdump[651]: saving vmcore
kdump.sh[652]: readpage_elf: Attempt to read non-existent page at 0x4000000000000000.
kdump.sh[652]: readmem: type_addr: 0, addr:0, size:8
kdump.sh[652]: get_vmemmap_list_info: Can't get vmemmap region addresses
kdump.sh[652]: get_machdep_info_ppc64: Can't get vmemmap list info.
kdump.sh[652]: makedumpfile Failed.
kdump[654]: saving vmcore failed, exitcode:1
kdump[656]: saving the /run/initramfs/kexec-dmesg.log to /sysroot/var/crash/127.0.0.1-2023-07-31-09:01:28//
kdump[663]: saving vmcore failed
systemd[1]: kdump-capture.service: Main process exited, code=exited, status=1/FAILURE
systemd[1]: kdump-capture.service: Failed with result 'exit-code'.
systemd[1]: Failed to start Kdump Vmcore Save Service.
[FAILED] Failed to start Kdump Vmcore Save Service.
Git bisect points to following patch:
8dc9a0ad0c3e7f43e4e091e4e24634e21ce17a54 is the first bad commit
commit 8dc9a0ad0c3e7f43e4e091e4e24634e21ce17a54
powerpc/book3s64/vmemmap: switch radix to use a different vmemmap handling function
Have attached the kdump log.
-Sachin
OF stdout device is: /vdevice/vty@30000000
Preparing to boot Linux version 6.5.0-rc4-next-20230731 (root@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc (GCC) 11.3.1 20221121 (Red Hat 11.3.1-4), GNU ld version 2.35.2-39.el9) #16 SMP Mon Jul 31 08:57:57 CDT 2023
Detected machine type: 0000000000000101
command line: BOOT_IMAGE=(ieee1275//vdevice/v-scsi@3000006c/disk@8100000000000000,msdos2)/vmlinuz-6.5.0-rc4-next-20230731 root=UUID=f9147eae-d3ac-44c4-875d-162ec95a7528 ro crashkernel=3072M fadump=on biosdevname=0 selinux=0
Max number of cores passed to firmware: 256 (NR_CPUS = 2048)
Calling ibm,client-architecture-support... done
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000015230000
alloc_top : 0000000020000000
alloc_top_hi : 0000000020000000
rmo_top : 0000000020000000
ram_top : 0000000020000000
instantiating rtas at 0x000000001ec20000... done
instantiating sml at 0x000000001ec10000... done
prom_hold_cpus: skipped
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000015240000 -> 0x00000000152419cf
Device tree struct 0x0000000015250000 -> 0x0000000015260000
Quiescing Open Firmware ...
Booting Linux via __start() @ 0x000000000e550000 ...
[ 0.000000] rtas fadump: Firmware-assisted dump is active.
[ 0.000000] fadump: Firmware-assisted dump is active.
[ 0.000000] fadump: Reserving 58368MB of memory at 0x000000c0000000 for preserving crash data
[ 0.000000] radix-mmu: Page sizes from device-tree:
[ 0.000000] radix-mmu: Page size shift = 12 AP=0x0
[ 0.000000] radix-mmu: Page size shift = 16 AP=0x5
[ 0.000000] radix-mmu: Page size shift = 21 AP=0x1
[ 0.000000] radix-mmu: Page size shift = 30 AP=0x2
[ 0.000000] Activating Kernel Userspace Access Prevention
[ 0.000000] Activating Kernel Userspace Execution Prevention
[ 0.000000] radix-mmu: Mapped 0x0000000000000000-0x0000000002640000 with 64.0 KiB pages (exec)
[ 0.000000] radix-mmu: Mapped 0x0000000002640000-0x0000000f00000000 with 64.0 KiB pages
[ 0.000000] lpar: Using radix MMU under hypervisor
[ 0.000000] Linux version 6.5.0-rc4-next-20230731 (root@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc (GCC) 11.3.1 20221121 (Red Hat 11.3.1-4), GNU ld version 2.35.2-39.el9) #16 SMP Mon Jul 31 08:57:57 CDT 2023
[ 0.000000] Found initrd at 0xc000000011500000:0xc00000001522c688
[ 0.000000] Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1030.20 (NH1030_058) hv:phyp pSeries
[ 0.000000] printk: bootconsole [udbg0] enabled
[ 0.000000] Partition configured for 128 cpus.
[ 0.000000] CPU maps initialized for 8 threads per core
[ 0.000000] numa: Partition configured for 32 NUMA nodes.
[ 0.000000] -----------------------------------------------------
[ 0.000000] phys_mem_size = 0xf00000000
[ 0.000000] dcache_bsize = 0x80
[ 0.000000] icache_bsize = 0x80
[ 0.000000] cpu_features = 0x001c00eb8f5f9187
[ 0.000000] possible = 0x001ffbfbcf5fb187
[ 0.000000] always = 0x0000000380008181
[ 0.000000] cpu_user_features = 0xdc0065c2 0xaef60000
[ 0.000000] mmu_features = 0xbc007641
[ 0.000000] firmware_features = 0x00001dbfc45bfc57
[ 0.000000] vmalloc start = 0xc008000000000000
[ 0.000000] IO start = 0xc00a000000000000
[ 0.000000] vmemmap start = 0xc00c000000000000
[ 0.000000] -----------------------------------------------------
[ 0.000000] numa: NODE_DATA [mem 0x47112e80-0x4711a67f]
[ 0.000000] rfi-flush: fallback displacement flush available
[ 0.000000] count-cache-flush: hardware flush enabled.
[ 0.000000] link-stack-flush: software flush enabled.
[ 0.000000] stf-barrier: eieio barrier available
[ 0.000000] PPC64 nvram contains 15360 bytes
[ 0.000000] barrier-nospec: using ORI speculation barrier
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000effffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000effffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000effffffff]
[ 0.000000] Initializing node 1 as memoryless
[ 0.000000] Initmem setup node 1 as memoryless
[ 0.000000] Initializing node 2 as memoryless
[ 0.000000] Initmem setup node 2 as memoryless
[ 0.000000] Initializing node 3 as memoryless
[ 0.000000] Initmem setup node 3 as memoryless
[ 0.000000] Initializing node 4 as memoryless
[ 0.000000] Initmem setup node 4 as memoryless
[ 0.000000] Initializing node 5 as memoryless
[ 0.000000] Initmem setup node 5 as memoryless
[ 0.000000] Initializing node 6 as memoryless
[ 0.000000] Initmem setup node 6 as memoryless
[ 0.000000] Initializing node 7 as memoryless
[ 0.000000] Initmem setup node 7 as memoryless
[ 0.000000] Initializing node 8 as memoryless
[ 0.000000] Initmem setup node 8 as memoryless
[ 0.000000] Initializing node 9 as memoryless
[ 0.000000] Initmem setup node 9 as memoryless
[ 0.000000] Initializing node 10 as memoryless
[ 0.000000] Initmem setup node 10 as memoryless
[ 0.000000] Initializing node 11 as memoryless
[ 0.000000] Initmem setup node 11 as memoryless
[ 0.000000] Initializing node 12 as memoryless
[ 0.000000] Initmem setup node 12 as memoryless
[ 0.000000] Initializing node 13 as memoryless
[ 0.000000] Initmem setup node 13 as memoryless
[ 0.000000] Initializing node 14 as memoryless
[ 0.000000] Initmem setup node 14 as memoryless
[ 0.000000] Initializing node 15 as memoryless
[ 0.000000] Initmem setup node 15 as memoryless
[ 0.000000] Initializing node 16 as memoryless
[ 0.000000] Initmem setup node 16 as memoryless
[ 0.000000] Initializing node 17 as memoryless
[ 0.000000] Initmem setup node 17 as memoryless
[ 0.000000] Initializing node 18 as memoryless
[ 0.000000] Initmem setup node 18 as memoryless
[ 0.000000] Initializing node 19 as memoryless
[ 0.000000] Initmem setup node 19 as memoryless
[ 0.000000] Initializing node 20 as memoryless
[ 0.000000] Initmem setup node 20 as memoryless
[ 0.000000] Initializing node 21 as memoryless
[ 0.000000] Initmem setup node 21 as memoryless
[ 0.000000] Initializing node 22 as memoryless
[ 0.000000] Initmem setup node 22 as memoryless
[ 0.000000] Initializing node 23 as memoryless
[ 0.000000] Initmem setup node 23 as memoryless
[ 0.000000] Initializing node 24 as memoryless
[ 0.000000] Initmem setup node 24 as memoryless
[ 0.000000] Initializing node 25 as memoryless
[ 0.000000] Initmem setup node 25 as memoryless
[ 0.000000] Initializing node 26 as memoryless
[ 0.000000] Initmem setup node 26 as memoryless
[ 0.000000] Initializing node 27 as memoryless
[ 0.000000] Initmem setup node 27 as memoryless
[ 0.000000] Initializing node 28 as memoryless
[ 0.000000] Initmem setup node 28 as memoryless
[ 0.000000] Initializing node 29 as memoryless
[ 0.000000] Initmem setup node 29 as memoryless
[ 0.000000] Initializing node 30 as memoryless
[ 0.000000] Initmem setup node 30 as memoryless
[ 0.000000] Initializing node 31 as memoryless
[ 0.000000] Initmem setup node 31 as memoryless
[ 0.000000] percpu: Embedded 10 pages/cpu s606888 r0 d48472 u655360
[ 0.000000] Kernel command line: BOOT_IMAGE=(ieee1275//vdevice/v-scsi@3000006c/disk@8100000000000000,msdos2)/vmlinuz-6.5.0-rc4-next-20230731 root=UUID=f9147eae-d3ac-44c4-875d-162ec95a7528 ro crashkernel=3072M fadump=on biosdevname=0 selinux=0
[ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=(ieee1275//vdevice/v-scsi@3000006c/disk@8100000000000000,msdos2)/vmlinuz-6.5.0-rc4-next-20230731 biosdevname=0", will be passed to user space.
[ 0.000000] random: crng init done
[ 0.000000] Dentry cache hash table entries: 131072 (order: 4, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 3, 524288 bytes, linear)
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Fallback order for Node 1: 1 0
[ 0.000000] Fallback order for Node 2: 2 0
[ 0.000000] Fallback order for Node 3: 3 0
[ 0.000000] Fallback order for Node 4: 4 0
[ 0.000000] Fallback order for Node 5: 5 0
[ 0.000000] Fallback order for Node 6: 6 0
[ 0.000000] Fallback order for Node 7: 7 0
[ 0.000000] Fallback order for Node 8: 8 0
[ 0.000000] Fallback order for Node 9: 9 0
[ 0.000000] Fallback order for Node 10: 10 0
[ 0.000000] Fallback order for Node 11: 11 0
[ 0.000000] Fallback order for Node 12: 12 0
[ 0.000000] Fallback order for Node 13: 13 0
[ 0.000000] Fallback order for Node 14: 14 0
[ 0.000000] Fallback order for Node 15: 15 0
[ 0.000000] Fallback order for Node 16: 16 0
[ 0.000000] Fallback order for Node 17: 17 0
[ 0.000000] Fallback order for Node 18: 18 0
[ 0.000000] Fallback order for Node 19: 19 0
[ 0.000000] Fallback order for Node 20: 20 0
[ 0.000000] Fallback order for Node 21: 21 0
[ 0.000000] Fallback order for Node 22: 22 0
[ 0.000000] Fallback order for Node 23: 23 0
[ 0.000000] Fallback order for Node 24: 24 0
[ 0.000000] Fallback order for Node 25: 25 0
[ 0.000000] Fallback order for Node 26: 26 0
[ 0.000000] Fallback order for Node 27: 27 0
[ 0.000000] Fallback order for Node 28: 28 0
[ 0.000000] Fallback order for Node 29: 29 0
[ 0.000000] Fallback order for Node 30: 30 0
[ 0.000000] Fallback order for Node 31: 31 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 982080
[ 0.000000] Policy zone: Normal
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 836608K/62914560K available (16384K kernel code, 5632K rwdata, 16384K rodata, 6400K init, 2793K bss, 62077952K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=128, Nodes=32
[ 0.000000] ftrace: allocating 41776 entries in 16 pages
[ 0.000000] ftrace: allocated 16 pages with 1 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2048 to nr_cpu_ids=128.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=128
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] xive: Using IRQ range [400000-40007f]
[ 0.000000] xive: Interrupt handling initialized with spapr backend
[ 0.000000] xive: Using priority 7 for all interrupts
[ 0.000000] xive: Using 64kB queues
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes to big.
[ 0.000001] time_init: 56 bit decrementer (max: 7fffffffffffff)
[ 0.000016] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x761537d007, max_idle_ns: 440795202126 ns
[ 0.000043] clocksource: timebase mult[1f40000] shift[24] registered
[ 0.000415] kfence: initialized - using 33554432 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.000582] Console: colour dummy device 80x25
[ 0.000597] printk: console [hvc0] enabled
[ 0.000597] printk: console [hvc0] enabled
[ 0.000608] printk: bootconsole [udbg0] disabled
[ 0.000608] printk: bootconsole [udbg0] disabled
[ 0.000721] pid_max: default: 131072 minimum: 1024
[ 0.000946] LSM: initializing lsm=lockdown,capability,yama,bpf,integrity
[ 0.001017] Yama: becoming mindful.
[ 0.001025] LSM support for eBPF active
[ 0.001110] Mount-cache hash table entries: 8192 (order: 0, 65536 bytes, linear)
[ 0.001118] Mountpoint-cache hash table entries: 8192 (order: 0, 65536 bytes, linear)
[ 0.002499] RCU Tasks Rude: Setting shift to 7 and lim to 1 rcu_task_cb_adjust=1.
[ 0.002520] RCU Tasks Trace: Setting shift to 7 and lim to 1 rcu_task_cb_adjust=1.
[ 0.002544] POWER10 performance monitor hardware support registered
[ 0.002573] rcu: Hierarchical SRCU implementation.
[ 0.002575] rcu: Max phase no-delay instances is 1000.
[ 0.003461] smp: Bringing up secondary CPUs ...
[ 0.009325] smp: Brought up 1 node, 32 CPUs
[ 0.009337] numa: Node 0 CPUs: 0-31
[ 0.009342] Big cores detected but using small core scheduling
[ 0.011860] devtmpfs: initialized
[ 0.014364] PCI host bridge /pci@800000020000012 ranges:
[ 0.014373] MEM 0x0000040100000000..0x000004017effffff -> 0x0000000080000000
[ 0.014378] MEM 0x000004c000000000..0x000004ffffffffff -> 0x0006220000000000
[ 0.014396] PCI host bridge /pci@800000020000013 ranges:
[ 0.014401] MEM 0x0000040080000000..0x00000400feffffff -> 0x0000000080000000
[ 0.014404] MEM 0x0000048000000000..0x000004bfffffffff -> 0x0006200000000000
[ 0.014417] PCI host bridge /pci@800000020000014 ranges:
[ 0.014421] MEM 0x0000040000000000..0x000004007effffff -> 0x0000000080000000
[ 0.014424] MEM 0x0000044000000000..0x0000047fffffffff -> 0x0006320000000000
[ 0.014481] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.014487] futex hash table entries: 32768 (order: 6, 4194304 bytes, linear)
[ 0.015151] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.015385] audit: initializing netlink subsys (disabled)
[ 0.015443] audit: type=2000 audit(1690812084.010:1): state=initialized audit_enabled=0 res=1
[ 0.015507] thermal_sys: Registered thermal governor 'fair_share'
[ 0.015509] thermal_sys: Registered thermal governor 'step_wise'
[ 0.015558] cpuidle: using governor menu
[ 0.015703] HugeTLB support is disabled!
[ 0.015934] pstore: Using crash dump compression: deflate
[ 0.015937] pstore: Registered nvram as persistent store backend
[ 0.016318] EEH: pSeries platform initialized
[ 0.016434] plpks: POWER LPAR Platform KeyStore is not supported or enabled
[ 0.021572] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.021816] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.021820] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.046093] cryptd: max_cpu_qlen set to 1000
[ 0.046408] iommu: Default domain type: Translated
[ 0.046411] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.046541] SCSI subsystem initialized
[ 0.046565] usbcore: registered new interface driver usbfs
[ 0.046572] usbcore: registered new interface driver hub
[ 0.046592] usbcore: registered new device driver usb
[ 0.046611] pps_core: LinuxPPS API ver. 1 registered
[ 0.046613] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.046618] PTP clock support registered
[ 0.046697] EDAC MC: Ver: 3.0.0
[ 0.046888] NetLabel: Initializing
[ 0.046891] NetLabel: domain hash size = 128
[ 0.046893] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.046907] NetLabel: unlabeled traffic allowed by default
[ 0.047793] PCI: Probing PCI hardware
[ 0.047834] PCI host bridge to bus 0012:01
[ 0.047837] pci_bus 0012:01: Unknown NUMA node; performance will be reduced
[ 0.047841] pci_bus 0012:01: root bus resource [mem 0x40100000000-0x4017effffff] (bus address [0x80000000-0xfeffffff])
[ 0.047846] pci_bus 0012:01: root bus resource [mem 0x4c000000000-0x4ffffffffff 64bit] (bus address [0x6220000000000-0x6223fffffffff])
[ 0.047850] pci_bus 0012:01: root bus resource [bus 01-ff]
[ 0.052646] IOMMU table initialized, virtual merging enabled
[ 0.052682] PCI host bridge to bus 0013:01
[ 0.052685] pci_bus 0013:01: Unknown NUMA node; performance will be reduced
[ 0.052688] pci_bus 0013:01: root bus resource [mem 0x40080000000-0x400feffffff] (bus address [0x80000000-0xfeffffff])
[ 0.052692] pci_bus 0013:01: root bus resource [mem 0x48000000000-0x4bfffffffff 64bit] (bus address [0x6200000000000-0x6203fffffffff])
[ 0.052696] pci_bus 0013:01: root bus resource [bus 01-ff]
[ 0.057536] PCI host bridge to bus 0014:01
[ 0.057539] pci_bus 0014:01: Unknown NUMA node; performance will be reduced
[ 0.057542] pci_bus 0014:01: root bus resource [mem 0x40000000000-0x4007effffff] (bus address [0x80000000-0xfeffffff])
[ 0.057546] pci_bus 0014:01: root bus resource [mem 0x44000000000-0x47fffffffff 64bit] (bus address [0x6320000000000-0x6323fffffffff])
[ 0.057550] pci_bus 0014:01: root bus resource [bus 01-ff]
[ 0.062360] EEH: No capable adapters found: recovery disabled.
[ 0.062422] vgaarb: loaded
[ 0.062624] clocksource: Switched to clocksource timebase
[ 0.070637] VFS: Disk quotas dquot_6.6.0
[ 0.070682] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
[ 0.072167] NET: Registered PF_INET protocol family
[ 0.072204] IP idents hash table entries: 16384 (order: 1, 131072 bytes, linear)
[ 0.072729] tcp_listen_portaddr_hash hash table entries: 4096 (order: 0, 65536 bytes, linear)
[ 0.072740] Table-perturb hash table entries: 65536 (order: 2, 262144 bytes, linear)
[ 0.072796] TCP established hash table entries: 8192 (order: 0, 65536 bytes, linear)
[ 0.072810] TCP bind hash table entries: 8192 (order: 2, 262144 bytes, linear)
[ 0.072831] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.073030] MPTCP token hash table entries: 4096 (order: 0, 98304 bytes, linear)
[ 0.073052] UDP hash table entries: 2048 (order: 0, 65536 bytes, linear)
[ 0.073060] UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes, linear)
[ 0.073207] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.073215] NET: Registered PF_XDP protocol family
[ 0.073220] PCI: CLS 0 bytes, default 128
[ 0.073268] Trying to unpack rootfs image as initramfs...
[ 0.087602] vio_register_device_node: node lid missing 'reg'
[ 0.087750] vas: GZIP feature is available
[ 0.088851] hv-24x7: read 548 catalog entries, created 387 event attrs (0 failures), 387 descs
[ 0.095330] Initialise system trusted keyrings
[ 0.095450] workingset: timestamp_bits=38 max_order=14 bucket_order=0
[ 0.095476] zbud: loaded
[ 0.103889] NET: Registered PF_ALG protocol family
[ 0.103908] Key type asymmetric registered
[ 0.103912] Asymmetric key parser 'x509' registered
[ 0.400373] Freeing initrd memory: 62592K
[ 0.402888] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.402948] io scheduler mq-deadline registered
[ 0.402951] io scheduler kyber registered
[ 0.402969] io scheduler bfq registered
[ 0.404246] atomic64_test: passed
[ 0.404454] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.404457] PowerPC PowerNV PCI Hotplug Driver version: 0.1
[ 0.404703] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.405164] tpm_ibmvtpm 30000003: CRQ initialization completed
[ 1.436901] rdac: device handler registered
[ 1.436933] hp_sw: device handler registered
[ 1.436936] emc: device handler registered
[ 1.436976] alua: device handler registered
[ 1.437136] usbcore: registered new interface driver usbserial_generic
[ 1.437142] usbserial: USB Serial support registered for generic
[ 1.437165] mousedev: PS/2 mouse device common for all mice
[ 1.437213] rtc-generic rtc-generic: registered as rtc0
[ 1.437231] rtc-generic rtc-generic: setting system clock to 2023-07-31T14:01:26 UTC (1690812086)
[ 1.437294] xcede: xcede_record_size = 10
[ 1.437297] xcede: Record 0 : hint = 1, latency = 0x1800 tb ticks, Wake-on-irq = 1
[ 1.437300] xcede: Record 1 : hint = 2, latency = 0x3c00 tb ticks, Wake-on-irq = 0
[ 1.437303] cpuidle: Skipping the 2 Extended CEDE idle states
[ 1.437305] cpuidle: Fixed up CEDE exit latency to 12 us
[ 1.438255] nx_compress_pseries ibm,compression-v1: nx842_OF_upd: max_sync_size new:65536 old:0
[ 1.438260] nx_compress_pseries ibm,compression-v1: nx842_OF_upd: max_sync_sg new:510 old:0
[ 1.438263] nx_compress_pseries ibm,compression-v1: nx842_OF_upd: max_sg_len new:4080 old:0
[ 1.438318] hid: raw HID events driver (C) Jiri Kosina
[ 1.438335] usbcore: registered new interface driver usbhid
[ 1.438338] usbhid: USB HID core driver
[ 1.438363] drop_monitor: Initializing network drop monitor service
[ 1.438432] Initializing XFRM netlink socket
[ 1.438484] NET: Registered PF_INET6 protocol family
[ 1.438877] Segment Routing with IPv6
[ 1.438883] In-situ OAM (IOAM) with IPv6
[ 1.438900] NET: Registered PF_PACKET protocol family
[ 1.438922] mpls_gso: MPLS GSO support
[ 1.438964] secvar-sysfs: Failed to retrieve secvar operations
[ 1.440071] registered taskstats version 1
[ 1.441166] Loading compiled-in X.509 certificates
[ 1.449350] Loaded X.509 cert 'Build time autogenerated kernel key: 30605ad6e8600e9dfc35dc713fba848168c58686'
[ 1.450839] page_owner is disabled
[ 1.450852] Key type big_key registered
[ 1.452514] Key type trusted registered
[ 1.454302] Key type encrypted registered
[ 1.454326] Secure boot mode disabled
[ 1.454331] Loading compiled-in module X.509 certificates
[ 1.454801] Loaded X.509 cert 'Build time autogenerated kernel key: 30605ad6e8600e9dfc35dc713fba848168c58686'
[ 1.454805] ima: Allocated hash algorithm: sha256
[ 1.465632] Secure boot mode disabled
[ 1.465645] Trusted boot mode disabled
[ 1.465647] ima: No architecture policies found
[ 1.465658] evm: Initialising EVM extended attributes:
[ 1.465660] evm: security.selinux
[ 1.465662] evm: security.SMACK64 (disabled)
[ 1.465664] evm: security.SMACK64EXEC (disabled)
[ 1.465666] evm: security.SMACK64TRANSMUTE (disabled)
[ 1.465668] evm: security.SMACK64MMAP (disabled)
[ 1.465670] evm: security.apparmor (disabled)
[ 1.465672] evm: security.ima
[ 1.465673] evm: security.capability
[ 1.465675] evm: HMAC attrs: 0x1
[ 1.465712] alg: No test for 842 (842-nx)
[ 1.590023] clk: Disabling unused clocks
[ 1.591300] Freeing unused kernel image (initmem) memory: 6400K
[ 1.665298] Checked W+X mappings: passed, no W+X pages found
[ 1.665325] Run /init as init process
[ 1.709784] systemd[1]: systemd 252-15.el9 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 1.709800] systemd[1]: Detected virtualization powervm.
[ 1.709806] systemd[1]: Detected architecture ppc64-le.
[ 1.709810] systemd[1]: Running in initrd.
Welcome to Red Hat Enterprise Linux 9.3 Beta (Plow) dracut-057-21.git20230214.el9 (Initramfs)!
[ 1.709911] systemd[1]: Hostname set to <ltcden8-lp8.aus.stglabs.ibm.com>.
[ 1.789243] systemd-fstab-generator[362]: Failed to create unit file '/run/systemd/generator/sysroot.mount', as it already exists. Duplicate entry in '/etc/fstab'?
[ 1.789463] systemd[359]: /usr/lib/systemd/system-generators/systemd-fstab-generator failed with exit status 1.
[ 1.808243] systemd[1]: /usr/lib/systemd/system/kdump-capture.service:23: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 1.808260] systemd[1]: /usr/lib/systemd/system/kdump-capture.service:24: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 1.819199] systemd[1]: Queued start job for default target Initrd Default Target.
[ 1.819366] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password â?¦ts to Console Directory Watch.
[ 1.819512] systemd[1]: Reached target Initrd /usr File System.
[ OK ] Reached target Initrd /usr File System.
[ 1.819561] systemd[1]: Reached target Local File Systems.
[ OK ] Reached target Local File Systems.
[ 1.819603] systemd[1]: Reached target Path Units.
[ OK ] Reached target Path Units.
[ 1.819654] systemd[1]: Reached target Slice Units.
[ OK ] Reached target Slice Units.
[ 1.819699] systemd[1]: Reached target Swaps.
[ OK ] Reached target Swaps.
[ 1.819743] systemd[1]: Reached target Timer Units.
[ OK ] Reached target Timer Units.
[ 1.819851] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 1.819955] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 1.820067] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 1.820156] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 1.820201] systemd[1]: Reached target Socket Units.
[ OK ] Reached target Socket Units.
[ 1.822070] systemd[1]: Starting Create List of Static Device Nodes...
Starting Create List of Static Device Nodes...
[ 1.823594] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 1.824567] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 1.825421] systemd[1]: Starting Setup Virtual Console...
Starting Setup Virtual Console...
[ 1.825863] systemd[1]: Finished Create List of Static Device Nodes.
[ OK ] Finished Create List of Static Device Nodes.
[ 1.826802] systemd[1]: Starting Create Static Device Nodes in /dev...
Starting Create Static Device Nodes in /dev...
[ 1.827921] fuse: module verification failed: signature and/or required key missing - tainting kernel
[ 1.830943] systemd[1]: Finished Create Static Device Nodes in /dev.
[ OK ] Finished Create Static Device Nodes in /dev.
[ 1.835246] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
Starting Create Volatile Files and Directories...
[ 1.833800] systemd[1]: Starting Create Volatile Files and Directories...
[ 1.847112] fuse: init (API version 7.38)
[ 1.844779] systemd-modules-load[398]: Inserted module 'fuse'
[ OK ] Finished Load Kernel Modules.
[ 1.845059] systemd[1]: Finished Load Kernel Modules.
[ 1.845943] systemd[1]: Starting Apply Kernel Variables...
Starting Apply Kernel Variables...
[ OK ] Finished Setup Virtual Console.
[ 1.846385] systemd[1]: Finished Setup Virtual Console.
Starting dracut ask for additional cmdline parameters...
[ 1.847317] systemd[1]: Starting dracut ask for additional cmdline parameters...
[ OK ] Finished Create Volatile Files and Directories.
[ 1.847539] systemd[1]: Finished Create Volatile Files and Directories.
[ OK ] Finished Apply Kernel Variables.
[ 1.849246] systemd[1]: Finished Apply Kernel Variables.
[ 1.867352] systemd[1]: Finished dracut ask for additional cmdline parameters.
[ OK ] Finished dracut ask for additional cmdline parameters.
[ 1.868350] systemd[1]: Starting dracut cmdline hook...
Starting dracut cmdline hook...
[ 1.874773] dracut-cmdline[425]: dracut-9.3 (Plow) dracut-057-21.git20230214.el9
[ 1.876220] dracut-cmdline[425]: Using kernel command line parameters: root=UUID=f9147eae-d3ac-44c4-875d-162ec95a7528 rootfstype=xfs rootflags=rw,relatime,attr2,inode64,logbufs=8,logbsize=32k,noquota BOOT_IMAGE=(ieee1275//vdevice/v-scsi@3000006c/disk@8100000000000000,msdos2)/vmlinuz-6.5.0-rc4-next-20230731 root=UUID=f9147eae-d3ac-44c4-875d-162ec95a7528 ro crashkernel=3072M fadump=on biosdevname=0 selinux=0
[ 1.888210] systemd[1]: Finished dracut cmdline hook.
[ OK ] Finished dracut cmdline hook.
[ 1.889260] systemd[1]: Starting dracut pre-udev hook...
Starting dracut pre-udev hook...
[ 1.898511] systemd[1]: Finished dracut pre-udev hook.
[ OK ] Finished dracut pre-udev hook.
[ 1.899569] systemd[1]: Starting Rule-based Manager for Device Events and Files...
Starting Rule-based Manageâ?¦for Device Events and Files...
[ 1.912520] systemd-udevd[487]: Using default interface naming scheme 'rhel-9.0'.
[ 1.914238] systemd[1]: Started Rule-based Manager for Device Events and Files.
[ OK ] Started Rule-based Manager for Device Events and Files.
[ 1.914353] systemd[1]: dracut pre-trigger hook was skipped because no trigger condition checks were met.
[ 1.915175] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 1.988975] synth uevent: /devices/vio: failed to send uevent
[ 1.988984] vio vio: uevent: failed to send synthetic uevent: -19
[ 1.986555] udevadm[494]: vio: Failed to write 'add' to '/sys/devices/vio/uevent', ignoring: No such device
[ 1.987473] systemd[1]: sys-module-fuse.device: Failed to enqueue SYSTEMD_WANTS= job, ignoring: Unit sys-fs-fuse-connections.mount not found.
[ 1.995111] synth uevent: /devices/vio/4000: failed to send uevent
[ 1.995117] vio 4000: uevent: failed to send synthetic uevent: -19
[ 1.995136] synth uevent: /devices/vio/4001: failed to send uevent
[ 1.995139] vio 4001: uevent: failed to send synthetic uevent: -19
[ 1.995153] synth uevent: /devices/vio/4002: failed to send uevent
[ 1.995157] vio 4002: uevent: failed to send synthetic uevent: -19
[ 1.995168] synth uevent: /devices/vio/4004: failed to send uevent
[ 1.995171] vio 4004: uevent: failed to send synthetic uevent: -19
[ 1.992556] udevadm[494]: 4000: Failed to write 'add' to '/sys/devices/vio/4000/uevent', ignoring: No such device
[ 1.992707] udevadm[494]: 4001: Failed to write 'add' to '/sys/devices/vio/4001/uevent', ignoring: No such device
[ 1.992783] udevadm[494]: 4002: Failed to write 'add' to '/sys/devices/vio/4002/uevent', ignoring: No such device
[ 1.992853] udevadm[494]: 4004: Failed to write 'add' to '/sys/devices/vio/4004/uevent', ignoring: No such device
[ OK ] Finished Coldplug All udev Devices.
[ 1.993899] systemd[1]: Finished Coldplug All udev Devices.
[ OK ] Reached target System Initialization.
[ 1.995165] systemd[1]: Reached target System Initialization.
[ OK ] Reached target Basic System.
[ 1.995230] systemd[1]: Reached target Basic System.
[ 1.996272] systemd[1]: Starting dracut initqueue hook...
Starting dracut initqueue hook...
[ 2.030645] ibmvscsi 3000006c: SRP_VERSION: 16.a
[ 2.030703] ibmvscsi 3000006c: Maximum ID: 64 Maximum LUN: 32 Maximum Channel: 3
[ 2.030708] scsi host0: IBM POWER Virtual SCSI Adapter 1.5.9
[ 2.030851] ibmvscsi 3000006c: partner initialization complete
[ 2.030871] ibmvscsi 3000006c: host srp version: 16.a, host partition ltcden8-vios1 (100), OS 3, max io 262144
[ 2.030904] ibmvscsi 3000006c: Client reserve enabled
[ 2.030909] ibmvscsi 3000006c: sent SRP login
[ 2.030941] ibmvscsi 3000006c: SRP_LOGIN succeeded
[ 2.062847] scsi 0:0:1:0: Direct-Access AIX VDASD 0001 PQ: 0 ANSI: 3
[ 2.063096] scsi 0:0:2:0: CD-ROM AIX VOPTA PQ: 0 ANSI: 4
[ 2.082957] scsi 0:0:1:0: Attached scsi generic sg0 type 0
[ 2.082987] scsi 0:0:2:0: Attached scsi generic sg1 type 5
[ 2.089688] sr 0:0:2:0: [sr0] scsi-1 drive
[ 2.089694] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.094173] sd 0:0:1:0: [sda] 26214400 4096-byte logical blocks: (107 GB/100 GiB)
[ 2.094202] sd 0:0:1:0: [sda] Write Protect is off
[ 2.094227] sd 0:0:1:0: [sda] Cache data unavailable
[ 2.094232] sd 0:0:1:0: [sda] Assuming drive cache: write through
[ 2.095949] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.096129] sd 0:0:1:0: [sda] Attached SCSI disk
[ 2.114701] systemd[1]: Found device VDASD 2.
[ OK ] Found device VDASD 2.
[ OK ] Found device VDASD 3.
[ 2.118436] systemd[1]: Found device VDASD 3.
[ 2.120504] systemd[1]: Reached target Initrd Root Device.
[ OK ] Reached target Initrd Root Device.
[ 2.131038] systemd[1]: Finished dracut initqueue hook.
[ OK ] Finished dracut initqueue hook.
[ 2.131150] systemd[1]: Reached target Preparation for Remote File Systems.
[ OK ] Reached target Preparation for Remote File Systems.
[ 2.131201] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 2.131270] systemd[1]: dracut pre-mount hook was skipped because no trigger condition checks were met.
Starting File System Checkâ?¦d3ac-44c4-875d-162ec95a7528...
[ 2.220226] systemd[1]: Starting File System Check on /dev/disk/by-uuid/f9147eae-d3ac-44c4-875d-162ec95a7528...
[ 2.224301] systemd-fsck[558]: /usr/sbin/fsck.xfs: XFS file system.
[ 2.224711] systemd[1]: Finished File System Check on /dev/disk/by-uuid/f9147eae-d3ac-44c4-875d-162ec95a7528.
[ OK ] Finished File System Checkâ?¦e-d3ac-44c4-875d-162ec95a7528.
Mounting /sysroot...
[ 2.860241] systemd[1]: Mounting /sysroot...
[ 3.093933] SGI XFS with ACLs, security attributes, scrub, quota, no debug enabled
[ 3.095675] XFS (sda3): Mounting V5 Filesystem f9147eae-d3ac-44c4-875d-162ec95a7528
[ 3.201620] XFS (sda3): Starting recovery (logdev: internal)
[ 3.319312] XFS (sda3): Ending recovery (logdev: internal)
[ 3.317593] systemd[1]: Mounted /sysroot.
[ OK ] Mounted /sysroot.
[ 3.317722] systemd[1]: Reached target Initrd Root File System.
[ OK ] Reached target Initrd Root File System.
Starting Mountpoints Configured in the Real Root...
[ 3.380165] systemd[1]: Starting Mountpoints Configured in the Real Root...
[ 3.387989] systemd[1]: initrd-parse-etc.service: Deactivated successfully.
[ 3.388123] systemd[1]: Finished Mountpoints Configured in the Real Root.
[ OK ] Finished Mountpoints Configured in the Real Root.
[ 3.388263] systemd[1]: Reached target Initrd File Systems.
[ OK ] Reached target Initrd File Systems.
[ 3.388339] systemd[1]: Reached target Initrd Default Target.
[ OK ] Reached target Initrd Default Target.
[ 3.388414] systemd[1]: dracut mount hook was skipped because no trigger condition checks were met.
[ 3.389316] systemd[1]: Starting dracut pre-pivot and cleanup hook...
Starting dracut pre-pivot and cleanup hook...
[ OK ] Finished dracut pre-pivot and cleanup hook.
[ 3.397265] systemd[1]: Finished dracut pre-pivot and cleanup hook.
Starting Kdump Vmcore Save Service...
[ 3.398217] systemd[1]: Starting Kdump Vmcore Save Service...
[ 3.408204] kdump[599]: Kdump is using the default log level(3).
[ 3.426352] kdump[635]: saving to /sysroot/var/crash/127.0.0.1-2023-07-31-09:01:28/
[ 3.428846] kdump[639]: Remounting the dump target in rw mode.
[ 3.432897] kdump[643]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2023-07-31-09:01:28/
[ 3.438898] kdump[649]: saving vmcore-dmesg.txt complete
[ 3.440087] kdump[651]: saving vmcore
[ 3.442524] kdump.sh[652]: readpage_elf: Attempt to read non-existent page at 0x4000000000000000.
[ 3.442592] kdump.sh[652]: readmem: type_addr: 0, addr:0, size:8
[ 3.442655] kdump.sh[652]: get_vmemmap_list_info: Can't get vmemmap region addresses
[ 3.442725] kdump.sh[652]: get_machdep_info_ppc64: Can't get vmemmap list info.
[ 3.442800] kdump.sh[652]: makedumpfile Failed.
[ 3.443770] kdump[654]: saving vmcore failed, exitcode:1
[ 3.444996] kdump[656]: saving the /run/initramfs/kexec-dmesg.log to /sysroot/var/crash/127.0.0.1-2023-07-31-09:01:28//
[ 3.453087] kdump[663]: saving vmcore failed
[ 3.453351] systemd[1]: kdump-capture.service: Main process exited, code=exited, status=1/FAILURE
[ 3.453443] systemd[1]: kdump-capture.service: Failed with result 'exit-code'.
[ 3.453575] systemd[1]: Failed to start Kdump Vmcore Save Service.
[FAILED] Failed to start Kdump Vmcore Save Service.
See 'systemctl status kdump-capture.service' for details.
[ 3.453676] systemd[1]: kdump-capture.service: Triggering OnFailure= dependencies.
[ OK ] Stopped target Timer Units.
[ 3.454022] systemd[1]: Stopped target Timer Units.
[ 3.454105] systemd[1]: dracut-pre-udev.service: Deactivated successfully.
[ OK ] Stopped dracut pre-udev hook.
[ 3.454180] systemd[1]: Stopped dracut pre-udev hook.
[ 3.454263] systemd[1]: dracut-cmdline.service: Deactivated successfully.
[ OK ] Stopped dracut cmdline hook.
[ 3.454338] systemd[1]: Stopped dracut cmdline hook.
[ 3.454414] systemd[1]: dracut-cmdline-ask.service: Deactivated successfully.
[ OK ] Stopped dracut ask for additional cmdline parameters.
[ 3.454488] systemd[1]: Stopped dracut ask for additional cmdline parameters.
[ 3.454590] systemd[1]: dracut-pre-pivot.service: Deactivated successfully.
[ OK ] Stopped dracut pre-pivot and cleanup hook.
[ 3.454671] systemd[1]: Stopped dracut pre-pivot and cleanup hook.
[ 3.454742] systemd[1]: Stopped target Initrd Default Target.
[ OK ] Stopped target Initrd Default Target.
[ 3.454813] systemd[1]: Stopped target Basic System.
[ OK ] Stopped target Basic System.
[ 3.454880] systemd[1]: Stopped target Initrd File Systems.
[ OK ] Stopped target Initrd File Systems.
[ OK ] Stopped target Initrd Root File System.
[ 3.454946] systemd[1]: Stopped target Initrd Root File System.
[ OK ] Stopped target Initrd /usr File System.
[ 3.455018] systemd[1]: Stopped target Initrd /usr File System.
[ OK ] Stopped target Path Units.
[ 3.455104] systemd[1]: Stopped target Path Units.
[ 3.455167] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.
[ 3.490076] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.
[ OK ] Stopped Dispatch Password â?¦ts to Console Directory Watch.
[ OK ] Stopped target Remote File Systems.
[ 3.490145] systemd[1]: Stopped target Remote File Systems.
[ OK ] Stopped target Preparation for Remote File Systems.
[ 3.490217] systemd[1]: Stopped target Preparation for Remote File Systems.
[ OK ] Stopped target Slice Units.
[ 3.490308] systemd[1]: Stopped target Slice Units.
[ OK ] Stopped target Socket Units.
[ 3.490370] systemd[1]: Stopped target Socket Units.
[ OK ] Stopped target System Initialization.
[ 3.490435] systemd[1]: Stopped target System Initialization.
[ OK ] Stopped target Swaps.
[ 3.490499] systemd[1]: Stopped target Swaps.
[ 3.490862] systemd[1]: Unmounting /sysroot...
Unmounting /sysroot...
[ 3.490942] systemd[1]: dracut-initqueue.service: Deactivated successfully.
[ OK ] Stopped dracut initqueue hook.
[ 3.491101] systemd[1]: Stopped dracut initqueue hook.
[ 3.491991] systemd[1]: Starting Kdump Error Handler...
Starting Kdump [ 3.494603] XFS (sda3): Unmounting Filesystem f9147eae-d3ac-44c4-875d-162ec95a7528
Error Handler...
[ 3.492080] systemd[1]: systemd-sysctl.service: Deactivated successfully.
[ OK ] Stopped Apply Kernel Variables.
[ 3.492163] systemd[1]: Stopped Apply Kernel Variables.
[ 3.492334] systemd[1]: systemd-modules-load.service: Deactivated successfully.
[ OK ] Stopped Load Kernel Modules.
[ 3.492394] systemd[1]: Stopped Load Kernel Modules.
[ 3.492463] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.
[ OK ] Stopped Create Static Device Nodes in /dev.
[ 3.492531] systemd[1]: Stopped Create Static Device Nodes in /dev.
[ 3.492657] systemd[1]: kmod-static-nodes.service: Deactivated successfully.
[ OK ] Stopped Create List of Static Device Nodes.
[ 3.492720] systemd[1]: Stopped Create List of Static Device Nodes.
[ 3.492794] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.
[ OK ] Stopped Create Volatile Files and Directories.
[ 3.492858] systemd[1]: Stopped Create Volatile Files and Directories.
[ OK ] Stopped target Local File Systems.
[ 3.492975] systemd[1]: Stopped target Local File Systems.
[ 3.493030] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.
[ OK ] Stopped Coldplug All udev Devices.
[ 3.493091] systemd[1]: Stopped Coldplug All udev Devices.
[ 3.493154] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.
[ OK ] Closed udev Control Socket.
[ 3.493209] systemd[1]: Closed udev Control Socket.
[ 3.493281] systemd[1]: systemd-udevd-kernel.socket: Deactivated successfully.
[ OK ] Closed udev Kernel Socket.
[ 3.493339] systemd[1]: Closed udev Kernel Socket.
[ 3.493499] systemd[1]: run-credentials-systemd\x2dsysctl.service.mount: Deactivated successfully.
[ 3.493577] systemd[1]: run-credentials-systemd\x2dtmpfiles\x2dsetup.service.mount: Deactivated successfully.
[ 3.493651] systemd[1]: run-credentials-systemd\x2dtmpfiles\x2dsetup\x2ddev.service.mount: Deactivated successfully.
[ 3.493969] systemd[1]: sysroot.mount: Deactivated successfully.
[ OK ] Unmounted /sysroot.
[ 3.494120] systemd[1]: Unmounted /sysroot.
[ 3.494268] systemd[1]: systemd-fsck-root.service: Deactivated successfully.
[ OK ] Stopped File System Check â?¦e-d3ac-44c4-875d-162ec95a7528.
[ 3.494326] systemd[1]: Stopped File System Check on /dev/disk/by-uuid/f9147eae-d3ac-44c4-875d-162ec95a7528.
[ OK ] Stopped target Initrd Root Device.
[ 3.494402] systemd[1]: Stopped target Initrd Root Device.
[ 3.502280] kdump[678]: Kdump is using the default log level(3).
[ 3.505899] kdump[683]: Executing failure action systemctl reboot -f
[ 3.509339] systemd[1]: Shutting down.
[ 3.510828] kdump[686]: Executing final action systemctl reboot -f
Failed to execute operation: Transport endpoint is not connected
[ 3.575126] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 3.575318] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[ 3.579467] systemd-journald[397]: Received SIGTERM from PID 1 (systemd-shutdow).
[ 3.613416] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[ 3.616697] systemd-shutdown[1]: Unmounting file systems.
[ 3.616788] systemd-shutdown[1]: All filesystems unmounted.
[ 3.616793] systemd-shutdown[1]: Deactivating swaps.
[ 3.616806] systemd-shutdown[1]: All swaps deactivated.
[ 3.616810] systemd-shutdown[1]: Detaching loop devices.
[ 3.616913] systemd-shutdown[1]: All loop devices detached.
[ 3.616917] systemd-shutdown[1]: Stopping MD devices.
[ 3.616960] systemd-shutdown[1]: All MD devices stopped.
[ 3.616965] systemd-shutdown[1]: Detaching DM devices.
[ 3.617006] systemd-shutdown[1]: All DM devices detached.
[ 3.617010] systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
[ 3.617547] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 3.617733] systemd-shutdown[1]: Rebooting.
[ 3.619047] reboot: Restarting system