[PATCH net-next v5 01/11] net: phy: nxp-c45-tja11xx: use phylib master/slave implementation

From: Radu Pirea (NXP OSS)
Date: Mon Jul 31 2023 - 05:16:53 EST


Remove the custom implementation of master/save setup and read status
and use genphy_c45_config_aneg and genphy_c45_read_status since phylib
has support for master/slave setup and master/slave status.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@xxxxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
---
drivers/net/phy/nxp-c45-tja11xx.c | 77 +------------------------------
1 file changed, 2 insertions(+), 75 deletions(-)

diff --git a/drivers/net/phy/nxp-c45-tja11xx.c b/drivers/net/phy/nxp-c45-tja11xx.c
index 029875a59ff8..41b8af0547e4 100644
--- a/drivers/net/phy/nxp-c45-tja11xx.c
+++ b/drivers/net/phy/nxp-c45-tja11xx.c
@@ -19,13 +19,6 @@

#define PHY_ID_TJA_1103 0x001BB010

-#define PMAPMD_B100T1_PMAPMD_CTL 0x0834
-#define B100T1_PMAPMD_CONFIG_EN BIT(15)
-#define B100T1_PMAPMD_MASTER BIT(14)
-#define MASTER_MODE (B100T1_PMAPMD_CONFIG_EN | \
- B100T1_PMAPMD_MASTER)
-#define SLAVE_MODE (B100T1_PMAPMD_CONFIG_EN)
-
#define VEND1_DEVICE_CONTROL 0x0040
#define DEVICE_CONTROL_RESET BIT(15)
#define DEVICE_CONTROL_CONFIG_GLOBAL_EN BIT(14)
@@ -988,72 +981,6 @@ static int nxp_c45_cable_test_get_status(struct phy_device *phydev,
return nxp_c45_start_op(phydev);
}

-static int nxp_c45_setup_master_slave(struct phy_device *phydev)
-{
- switch (phydev->master_slave_set) {
- case MASTER_SLAVE_CFG_MASTER_FORCE:
- case MASTER_SLAVE_CFG_MASTER_PREFERRED:
- phy_write_mmd(phydev, MDIO_MMD_PMAPMD, PMAPMD_B100T1_PMAPMD_CTL,
- MASTER_MODE);
- break;
- case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
- case MASTER_SLAVE_CFG_SLAVE_FORCE:
- phy_write_mmd(phydev, MDIO_MMD_PMAPMD, PMAPMD_B100T1_PMAPMD_CTL,
- SLAVE_MODE);
- break;
- case MASTER_SLAVE_CFG_UNKNOWN:
- case MASTER_SLAVE_CFG_UNSUPPORTED:
- return 0;
- default:
- phydev_warn(phydev, "Unsupported Master/Slave mode\n");
- return -EOPNOTSUPP;
- }
-
- return 0;
-}
-
-static int nxp_c45_read_master_slave(struct phy_device *phydev)
-{
- int reg;
-
- phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN;
- phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
-
- reg = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, PMAPMD_B100T1_PMAPMD_CTL);
- if (reg < 0)
- return reg;
-
- if (reg & B100T1_PMAPMD_MASTER) {
- phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_FORCE;
- phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER;
- } else {
- phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_FORCE;
- phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE;
- }
-
- return 0;
-}
-
-static int nxp_c45_config_aneg(struct phy_device *phydev)
-{
- return nxp_c45_setup_master_slave(phydev);
-}
-
-static int nxp_c45_read_status(struct phy_device *phydev)
-{
- int ret;
-
- ret = genphy_c45_read_status(phydev);
- if (ret)
- return ret;
-
- ret = nxp_c45_read_master_slave(phydev);
- if (ret)
- return ret;
-
- return 0;
-}
-
static int nxp_c45_get_sqi(struct phy_device *phydev)
{
int reg;
@@ -1355,11 +1282,11 @@ static struct phy_driver nxp_c45_driver[] = {
.features = PHY_BASIC_T1_FEATURES,
.probe = nxp_c45_probe,
.soft_reset = nxp_c45_soft_reset,
- .config_aneg = nxp_c45_config_aneg,
+ .config_aneg = genphy_c45_config_aneg,
.config_init = nxp_c45_config_init,
.config_intr = nxp_c45_config_intr,
.handle_interrupt = nxp_c45_handle_interrupt,
- .read_status = nxp_c45_read_status,
+ .read_status = genphy_c45_read_status,
.suspend = genphy_c45_pma_suspend,
.resume = genphy_c45_pma_resume,
.get_sset_count = nxp_c45_get_sset_count,
--
2.34.1