Re: [PATCH v1] arm64: dts: qcom: sc7280: Add PCIe0 node

[Krzysztof Kozlowski]

On 31/07/2023 07:29, Krishna Chaitanya Chundru wrote:
> 
> On 7/28/2023 9:27 PM, Krzysztof Kozlowski wrote:
>> On 28/07/2023 17:10, Krishna Chaitanya Chundru wrote:
>>> On 7/28/2023 5:33 PM, Krzysztof Kozlowski wrote:
>>>> On 28/07/2023 12:39, Krishna chaitanya chundru wrote:
>>>>> Add PCIe dtsi node for PCIe0 controller on sc7280 platform.
>>>>>
>>>>> Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
>>>> Thank you for your patch. There is something to discuss/improve.
>>>>
>>>>
>>>>> +		pcie0_phy: phy@1c06000 {
>>>>> +			compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy";
>>>>> +			reg = <0 0x01c06000 0 0x1c0>;
>>>>> +			#address-cells = <2>;
>>>>> +			#size-cells = <2>;
>>>>> +			ranges;
>>>>> +			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
>>>>> +				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
>>>>> +				 <&gcc GCC_PCIE_CLKREF_EN>,
>>>>> +				 <&gcc GCC_PCIE0_PHY_RCHNG_CLK>;
>>>>> +			clock-names = "aux", "cfg_ahb", "ref", "refgen";
>>>>> +
>>>>> +			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
>>>>> +			reset-names = "phy";
>>>>> +
>>>>> +			assigned-clocks = <&gcc GCC_PCIE0_PHY_RCHNG_CLK>;
>>>>> +			assigned-clock-rates = <100000000>;
>>>>> +
>>>>> +			status = "disabled";
>>>>> +
>>>>> +			pcie0_lane: phy@1c0e6200 {
>>>> Isn't this old-style of bindings? Wasn't there a change? On what tree
>>>> did you base it?
>> The work was here:
>> https://lore.kernel.org/all/20230324022514.1800382-5-dmitry.baryshkov@xxxxxxxxxx/
>>
>> But I don't remember the status.
>>
>>> Let me rebase and send it again.
>> This anyway looks like wrong compatible. You used sm8250.
> 
> The patch was send on latest linux-next only and the above change is not 
> merged yet.

I don't think we will want old DTS syntax... but this actually depends
on the status of Dmitry's patchset.

> 
> We are using the same compatible string as sm8250 because the phy is 
> same both from hardware and software perspective for sm8250.
> 
> that is why we are using the same compatible string.
> 
> Can you let me know if we want create a separate compatible string for 
> this even though  we are using same phy?

https://elixir.bootlin.com/linux/v6.1-rc1/source/Documentation/devicetree/bindings/writing-bindings.rst#42


Best regards,
Krzysztof