[PATCH v2 3/4] ARM: dts: st: ste: switch to enable-gpios

[Krzysztof Kozlowski]

The recommended name for enable GPIOs property in regulator-gpio is
"enable-gpios".  This is also required by bindings:

  ste-hrefv60plus-stuib.dtb: regulator-gpio: Unevaluated properties are not allowed ('enable-gpio' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Changes in v2:
1. Correct subject prefix: AMR->ARM
---
 arch/arm/boot/dts/st/ste-href520-tvk.dts       | 2 +-
 arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts  | 2 +-
 arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts    | 2 +-
 arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts | 2 +-
 arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts   | 2 +-
 arch/arm/boot/dts/st/ste-snowball.dts          | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/st/ste-href520-tvk.dts b/arch/arm/boot/dts/st/ste-href520-tvk.dts
index 4201547c5988..7f661f8f13ad 100644
--- a/arch/arm/boot/dts/st/ste-href520-tvk.dts
+++ b/arch/arm/boot/dts/st/ste-href520-tvk.dts
@@ -28,7 +28,7 @@ vmmci: regulator-gpio {
 			  2900000 0x0>;
 
 		gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-		enable-gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts
index dfc933214c1a..a29e345a43d3 100644
--- a/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts
+++ b/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts
@@ -27,7 +27,7 @@ vmmci: regulator-gpio {
 			  2900000 0x0>;
 
 		gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>;
-		enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
diff --git a/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts
index 75506339a93c..1968bd143114 100644
--- a/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts
+++ b/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts
@@ -27,7 +27,7 @@ vmmci: regulator-gpio {
 			  2900000 0x0>;
 
 		gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>;
-		enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 };
diff --git a/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts
index 52c56ed17ae6..7a5b6aa1db5b 100644
--- a/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts
+++ b/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts
@@ -29,7 +29,7 @@ vmmci: regulator-gpio {
 			  2900000 0x0>;
 
 		gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-		enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts
index 2db2f8be8b03..d5af3f375161 100644
--- a/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts
+++ b/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts
@@ -29,7 +29,7 @@ vmmci: regulator-gpio {
 			  2900000 0x0>;
 
 		gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-		enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/st/ste-snowball.dts b/arch/arm/boot/dts/st/ste-snowball.dts
index 9a3d6546399d..27c2ec51e732 100644
--- a/arch/arm/boot/dts/st/ste-snowball.dts
+++ b/arch/arm/boot/dts/st/ste-snowball.dts
@@ -229,7 +229,7 @@ vmmci: regulator-gpio {
 			/* GPIO228 SD_SEL */
 			gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
 			/* GPIO217 MMC_EN */
-			enable-gpio = <&gpio6 25 GPIO_ACTIVE_HIGH>;
+			enable-gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 
 			regulator-min-microvolt = <1800000>;
-- 
2.34.1