[PATCH v3 1/2] net: phy: at803x: fix the wol setting functions

From: Li Yang
Date: Fri Jul 28 2023 - 18:02:42 EST


In commit 7beecaf7d507 ("net: phy: at803x: improve the WOL feature"), it
seems not correct to use a wol_en bit in a 1588 Control Register which is
only available on AR8031/AR8033(share the same phy_id) to determine if WoL
is enabled. Change it back to use AT803X_INTR_ENABLE_WOL for determining
the WoL status which is applicable on all chips supporting wol. Also update
the at803x_set_wol() function to only update the 1588 register on chips
having it. After this change, disabling wol at probe from commit
d7cd5e06c9dd ("net: phy: at803x: disable WOL at probe") is no longer
needed. So that part is removed.

Fixes: 7beecaf7d507 ("net: phy: at803x: improve the WOL feature")
Signed-off-by: Li Yang <leoyang.li@xxxxxxx>
Reviewed-by: Viorel Suman <viorel.suman@xxxxxxx>
Reviewed-by: Wei Fang <wei.fang@xxxxxxx>
---
drivers/net/phy/at803x.c | 40 ++++++++++++++++++----------------------
1 file changed, 18 insertions(+), 22 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index c1f307d90518..1d61f7190367 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -459,21 +459,27 @@ static int at803x_set_wol(struct phy_device *phydev,
phy_write_mmd(phydev, MDIO_MMD_PCS, offsets[i],
mac[(i * 2) + 1] | (mac[(i * 2)] << 8));

- /* Enable WOL function */
- ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_PHY_MMD3_WOL_CTRL,
- 0, AT803X_WOL_EN);
- if (ret)
- return ret;
+ /* Enable WOL function for 1588 */
+ if (phydev->drv->phy_id == ATH8031_PHY_ID) {
+ ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
+ AT803X_PHY_MMD3_WOL_CTRL,
+ 0, AT803X_WOL_EN);
+ if (ret)
+ return ret;
+ }
/* Enable WOL interrupt */
ret = phy_modify(phydev, AT803X_INTR_ENABLE, 0, AT803X_INTR_ENABLE_WOL);
if (ret)
return ret;
} else {
- /* Disable WoL function */
- ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, AT803X_PHY_MMD3_WOL_CTRL,
- AT803X_WOL_EN, 0);
- if (ret)
- return ret;
+ /* Disable WoL function for 1588 */
+ if (phydev->drv->phy_id == ATH8031_PHY_ID) {
+ ret = phy_modify_mmd(phydev, MDIO_MMD_PCS,
+ AT803X_PHY_MMD3_WOL_CTRL,
+ AT803X_WOL_EN, 0);
+ if (ret)
+ return ret;
+ }
/* Disable WOL interrupt */
ret = phy_modify(phydev, AT803X_INTR_ENABLE, AT803X_INTR_ENABLE_WOL, 0);
if (ret)
@@ -508,11 +514,11 @@ static void at803x_get_wol(struct phy_device *phydev,
wol->supported = WAKE_MAGIC;
wol->wolopts = 0;

- value = phy_read_mmd(phydev, MDIO_MMD_PCS, AT803X_PHY_MMD3_WOL_CTRL);
+ value = phy_read(phydev, AT803X_INTR_ENABLE);
if (value < 0)
return;

- if (value & AT803X_WOL_EN)
+ if (value & AT803X_INTR_ENABLE_WOL)
wol->wolopts |= WAKE_MAGIC;
}

@@ -858,9 +864,6 @@ static int at803x_probe(struct phy_device *phydev)
if (phydev->drv->phy_id == ATH8031_PHY_ID) {
int ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
int mode_cfg;
- struct ethtool_wolinfo wol = {
- .wolopts = 0,
- };

if (ccr < 0)
return ccr;
@@ -876,13 +879,6 @@ static int at803x_probe(struct phy_device *phydev)
priv->is_fiber = true;
break;
}
-
- /* Disable WOL by default */
- ret = at803x_set_wol(phydev, &wol);
- if (ret < 0) {
- phydev_err(phydev, "failed to disable WOL on probe: %d\n", ret);
- return ret;
- }
}

return 0;
--
2.25.1.377.g2d2118b