[PATCH v4 0/6] can: tcan4x5x: Introduce tcan4552/4553

[Markus Schneider-Pargmann]

Hi everyone,

This series introduces two new chips tcan-4552 and tcan-4553. The
generic driver works in general but needs a few small changes. These are
caused by the removal of wake and state pins.

v4 updates the printks to use '%pe'.

Based on v6.5-rc1.

Best,
Markus

Changes in v4:
- Use printk("... %pe\n", ERR_PTR(ret)) for new printks

Changes in v3:
- Rebased to v6.5-rc1
- Removed devicetree compatible check in tcan driver. The device version
  is now unconditionally detected using the ID2 register

Changes in v2:
- Update the binding documentation to specify tcan4552 and tcan4553 with
  the tcan4x5x as fallback
- Update the driver to use auto detection as well. If compatible differs
  from the ID2 register, use the ID2 register and print a warning.
- Small style changes

Previous versions:
v3 - https://lore.kernel.org/lkml/20230721135009.1120562-1-msp@xxxxxxxxxxxx
v2 - https://lore.kernel.org/lkml/20230621093103.3134655-1-msp@xxxxxxxxxxxx
v1 - https://lore.kernel.org/lkml/20230314151201.2317134-1-msp@xxxxxxxxxxxx

Markus Schneider-Pargmann (6):
  dt-bindings: can: tcan4x5x: Add tcan4552 and tcan4553 variants
  can: tcan4x5x: Remove reserved register 0x814 from writable table
  can: tcan4x5x: Check size of mram configuration
  can: tcan4x5x: Rename ID registers to match datasheet
  can: tcan4x5x: Add support for tcan4552/4553
  can: tcan4x5x: Add error messages in probe

 .../devicetree/bindings/net/can/tcan4x5x.txt  |  11 +-
 drivers/net/can/m_can/m_can.c                 |  16 ++
 drivers/net/can/m_can/m_can.h                 |   1 +
 drivers/net/can/m_can/tcan4x5x-core.c         | 142 +++++++++++++++---
 drivers/net/can/m_can/tcan4x5x-regmap.c       |   1 -
 5 files changed, 145 insertions(+), 26 deletions(-)


base-commit: 06c2afb862f9da8dc5efa4b6076a0e48c3fbaaa5
-- 
2.40.1