Re: [PATCH v1] arm64: dts: qcom: sc7280: Add PCIe0 node

[Krzysztof Kozlowski]

On 28/07/2023 12:39, Krishna chaitanya chundru wrote:
> Add PCIe dtsi node for PCIe0 controller on sc7280 platform.
> 
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>

Thank you for your patch. There is something to discuss/improve.


> +		pcie0_phy: phy@1c06000 {
> +			compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy";
> +			reg = <0 0x01c06000 0 0x1c0>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
> +				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
> +				 <&gcc GCC_PCIE_CLKREF_EN>,
> +				 <&gcc GCC_PCIE0_PHY_RCHNG_CLK>;
> +			clock-names = "aux", "cfg_ahb", "ref", "refgen";
> +
> +			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
> +			reset-names = "phy";
> +
> +			assigned-clocks = <&gcc GCC_PCIE0_PHY_RCHNG_CLK>;
> +			assigned-clock-rates = <100000000>;
> +
> +			status = "disabled";
> +
> +			pcie0_lane: phy@1c0e6200 {

Isn't this old-style of bindings? Wasn't there a change? On what tree
did you base it?

> +
> +			pcie0_wake_n: pcie0-wake-n {

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).

Nodes end with 'state'.


> +				pins = "gpio89";
> +				function = "gpio";
> +
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
Best regards,
Krzysztof