Re: [PATCH v3 0/2] usb: typec: qcom-pmic-typec: enable DP support

[Guenter Roeck]

On 7/28/23 03:08, Dmitry Baryshkov wrote:
> To enable DisplayPort on the platforms supported by qcom-pmic-typec
> driver, we need to register a corresponding drm_bridge for this device
> to be able to receive the OOB hotplug event sent to the corresponding
> DRM connector.
>
> Reception of the hotplug event is implemented by [1], but there is no
> direct dependency on that patchset. This series implements the remaining
> parts: registration of the drm_bridge and setting of the proper
> destination for the OOB hotplug event.
>
> [1] https://patchwork.freedesktop.org/series/120393/
>
> Changes since v2:
> - Reworded commit message for the first patch to explicitly mention that
>    the "displayport" OF property was rejected (Bjorn)
> - Removed several #ifdefs from the qcom-pmic-typec patch (Bryan, Konrad,
>    Greg K-H)
>
> Changes since v1:
> - Properly handle CONFIG_DRM dependency. Disallow building DRM as a
>    module if qcom-pmic-typec driver is built-in (Bryan).

 config TYPEC_QCOM_PMIC
 	tristate "Qualcomm PMIC USB Type-C Port Controller Manager driver"
 	depends on ARCH_QCOM || COMPILE_TEST
+	depends on DRM || DRM=n

This disallows building TYPEC_QCOM_PMIC into the kernel if DRM is built
as module, which is pretty much the opposite of what is claimed above.
It does not affect DRM at all.

Not that it matters much, but I find it confusing if the change log
claims to do the opposite of what the code is doing.

Guenter

> Dmitry Baryshkov (2):
>    usb: typec: altmodes/displayport: add support for embedded DP cases
>    usb: typec: qcom-pmic-typec: register drm_bridge
>
>   drivers/usb/typec/altmodes/displayport.c      |  5 ++-
>   drivers/usb/typec/tcpm/Kconfig                |  1 +
>   drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c | 35 +++++++++++++++++++
>   3 files changed, 40 insertions(+), 1 deletion(-)