[PATCH v3 0/2] usb: typec: qcom-pmic-typec: enable DP support

[Dmitry Baryshkov]

To enable DisplayPort on the platforms supported by qcom-pmic-typec
driver, we need to register a corresponding drm_bridge for this device
to be able to receive the OOB hotplug event sent to the corresponding
DRM connector.

Reception of the hotplug event is implemented by [1], but there is no
direct dependency on that patchset. This series implements the remaining
parts: registration of the drm_bridge and setting of the proper
destination for the OOB hotplug event.

[1] https://patchwork.freedesktop.org/series/120393/

Changes since v2:
- Reworded commit message for the first patch to explicitly mention that
  the "displayport" OF property was rejected (Bjorn)
- Removed several #ifdefs from the qcom-pmic-typec patch (Bryan, Konrad,
  Greg K-H)

Changes since v1:
- Properly handle CONFIG_DRM dependency. Disallow building DRM as a
  module if qcom-pmic-typec driver is built-in (Bryan).

Dmitry Baryshkov (2):
  usb: typec: altmodes/displayport: add support for embedded DP cases
  usb: typec: qcom-pmic-typec: register drm_bridge

 drivers/usb/typec/altmodes/displayport.c      |  5 ++-
 drivers/usb/typec/tcpm/Kconfig                |  1 +
 drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c | 35 +++++++++++++++++++
 3 files changed, 40 insertions(+), 1 deletion(-)

-- 
2.39.2