Re: [PATCH V1 2/2] regulator: aw37503: add device-tree binding

[like]

Hello Krzysztof Kozlowski,
Thank you very much for your advice.

> On 26/07/2023 10:16, like@xxxxxxxxxx wrote:
> > From: Alec Li <like@xxxxxxxxxx>
> > 
> > Add aw37503 regulator device-tree binding documentation
> 
> subject rather like:
> regulator: dt-bindings: Add Awinic aw37503

I will modify it as suggested.

> > 
> > Signed-off-by: Alec Li <like@xxxxxxxxxx>
> > ---
> >  .../bindings/regulator/awinic,aw37503.yaml    | 73 +++++++++++++++++++
> >  1 file changed, 73 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml b/Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml
> > new file mode 100644
> > index 000000000000..0cd6fb001e20
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/regulator/awinic,aw37503.yaml
> > @@ -0,0 +1,73 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/regulator/awinic,aw37503.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Awinic AW37503 Voltage Regulator
> > +
> > +maintainers:
> > +  - Alec Li <like@xxxxxxxxxx>
> > +
> > +description: |
> 
> Do not need '|' unless you need to preserve formatting.

I will modify it as suggested.

> > +  The AW37503 is dual voltage regulator, designed to support positive/negative
> > +  supply for driving TFT-LCD panels. It support software-configurable output
> > +  switching and monitoring. The output voltages can be programmed via an I2C
> > +  compatible interface.
> > +
> > +properties:
> > +  compatible:
> > +    const:
> > +      - awinic,aw37503
> 
> This has to be in one line. As pointed out by Rob's bot: please test it
> before sending.

I will test it before sending and modify it as suggested.

> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  patternProperties:
> 
> <sigh>
> 
> > +    "^out[pn]$":
> > +      type: object
> > +      $ref: regulator.yaml#
> > +      unvaluatedproperties: false
> > +
> > +      required:
> > +        - regulator-name
> > +        - enable-gpios
> 
> regulator.yaml does not define enable-gpios, so you must define it in
> properties.

I will modify it as suggested.

> > +
> > +      additionalProperties: false
> 
> Drop, you already have unevaluatedProperties.

I will modify it as suggested.

> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - outp
> > +  - outn
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +
> > +    i2c {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        aw37503@3e {
> 
> Node names should be generic. See also an explanation and list of
> examples (not exhaustive) in DT specification:
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

I will modify it as suggested.

 
Best regards,
Alec Li