Re: [PATCH 1/2] hwmon: (isl28022) new driver for ISL28022 power monitor

[Carsten Spieß]

 On 7/26/23 18:19, Guenter Roeck wrote:
> Please provide a register dump (using i2cdump) for this chip. 

# i2cdump -y -r 0-9 1 0x40 w
     0,8  1,9  2,a  3,b  4,c  5,d  6,e  7,f
00: ff67 ca00 a25d c803 5006 0080 817f 00ff 
08: 0000 0000  

Please note that due to big vs.- little endian bytes are swapped,
should be read as:
00: 67ff 00ca 5da2 03c8 0650 8000 7f81 ff00
08: 0000 0000  

corresponding sensor values are about (not read at same time):
in0:           1.99 V  
in1:          23.97 V  
power1:        6.10 W  
curr1:       248.00 mA 

in0 should be read as mV

Regards, Carsten

Attachment: pgpa6xKQ_PlUW.pgp
Description: Digitale Signatur von OpenPGP