Re: [PATCH] ARM: dts: at91: ksz9477_evb: Add missing timer nodes

[claudiu beznea]

On 26.07.2023 21:33, Conor Dooley wrote:
> On Wed, Jul 26, 2023 at 10:19:02AM +0200, Lukasz Majewski wrote:
> > Dear Community,
> >
> > > Without this change the KSZ9477-EVB board hangs just after passing
> > > execution flow from u-boot to Linux kernel.
> > >
> > > This code has been copied from at91-sama5d3_xplained.dts.
> > >
> > > Test setup: Linux 6.5-rc1
> > > Config:     arch/arm/configs/sama5_defconfig
> > > Toolchain:  gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabi
> > >
> > > Signed-off-by: Lukasz Majewski <lukma@xxxxxxx>
> > > ---
> > >   .../boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts  | 12
> > > ++++++++++++ 1 file changed, 12 insertions(+)
> > >
> > > diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
> > > b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts index
> > > 14af1fd6d247..99cd6d15998b 100644 ---
> > > a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts +++
> > > b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts @@ -162,6
> > > +162,18 @@ };
> > >   };
> > >   
> > > +&tcb0 {
> > > +	timer0: timer@0 {
> > > +		compatible = "atmel,tcb-timer";
> > > +		reg = <0>;
> > > +	};
> > > +
> > > +	timer1: timer@1 {
> > > +		compatible = "atmel,tcb-timer";
> > > +		reg = <1>;
> > > +	};
> > > +};
> > > +
> > >   &usb0 {
> > >   	pinctrl-names = "default";
> > >   	pinctrl-0 = <&pinctrl_usba_vbus>;
> >
> > Gentle ping on this fix ...
>
> Claudiu has left Microchip, so things might've got a bit lost on the
> way. I've added his new address, Claudiu, will you take a look/pick this
> up please? I can also do it if that is easier for you.

It's on my list.

Thanks,
Claudiu

> Thanks,
> Conor.
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel