Re: [PATCH 3/8] AMR: dts: imx28-m28evk: populate fixed regulators

[Krzysztof Kozlowski]

On 26/07/2023 15:08, Fabio Estevam wrote:
> Patches 1, 2, 3, and 4 have a typo in the Subject: s/AMR/ARM.
> 
> On Wed, Jul 26, 2023 at 4:03 AM Krzysztof Kozlowski
> <krzysztof.kozlowski@xxxxxxxxxx> wrote:
>>
>> Fixed regulators put under "regulators" node will not be populated,
>> unless simple-bus or something similar is used.  Drop the "regulators"
>> wrapper node to fix this.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>> ---
>>  arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts | 45 ++++++++++------------
>>  1 file changed, 20 insertions(+), 25 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts b/arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts
>> index e350d57a4cec..6bf26f386a5e 100644
>> --- a/arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts
>> +++ b/arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts
>> @@ -18,33 +18,28 @@ backlight {
>>                 default-brightness-level = <6>;
>>         };
>>
>> -       regulators {
>> -               reg_vddio_sd0: regulator@1 {
>> -                       compatible = "regulator-fixed";
>> -                       reg = <1>;
>> -                       regulator-name = "vddio-sd0";
>> -                       regulator-min-microvolt = <3300000>;
>> -                       regulator-max-microvolt = <3300000>;
>> -                       gpio = <&gpio3 28 0>;
>> -               };
>> +       reg_vddio_sd0: regulator-1 {
> 
> It should be better to write:
> 
> reg_vddio_sd0: regulator-vddio-sd0 {
> 
> regulator-1 is not very descriptive.

Node names should be generic, not descriptive. These are old sources, so
they do not use fully override-by-phandle/label style, thus with
existing naming I reduce the chances of wrong overrides in some other
board or DTSI.

Best regards,
Krzysztof