[PATCH 5/8] ARM: dts: imx23: drop incorrect reg in fixed regulators

[Krzysztof Kozlowski]

Fixed regulators are not in some bus and bindings do not allow a "reg"
property.  Move them out of "regulators" node to top-level.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts | 23 +++++++------------
 .../boot/dts/nxp/mxs/imx23-stmp378x_devb.dts  | 19 +++++----------
 2 files changed, 14 insertions(+), 28 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts b/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts
index 0729e72f2283..229e727b222e 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dts
@@ -101,21 +101,14 @@ usb0: usb@80080000 {
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
-			gpio = <&gpio0 17 0>;
-		};
+	reg_usb0_vbus: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
+		gpio = <&gpio0 17 0>;
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts
index da4b88f32eaa..69124ba6a666 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx23-stmp378x_devb.dts
@@ -59,18 +59,11 @@ duart: serial@80070000 {
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_vddio_sd0: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 29 0>;
-		};
+	reg_vddio_sd0: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 29 0>;
 	};
 };
-- 
2.34.1