[PATCH 2/2] ARM: dts: marvell: dove: drop incorrect reg in fixed regulators

[Krzysztof Kozlowski]

Fixed regulators are not in some bus and bindings do not allow a "reg"
property.  Move them out of "regulators" node to top-level.

  dove-cubox.dtb: regulator@1: Unevaluated properties are not allowed ('reg' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm/boot/dts/marvell/dove-cm-a510.dtsi | 18 +++++--------
 arch/arm/boot/dts/marvell/dove-cubox.dts    | 29 ++++++++-------------
 arch/arm/boot/dts/marvell/dove-d3plug.dts   | 29 ++++++++-------------
 arch/arm/boot/dts/marvell/dove-sbc-a510.dts | 28 +++++++++-----------
 4 files changed, 41 insertions(+), 63 deletions(-)

diff --git a/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi b/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi
index 1082fdfbfe60..621cb145a8f6 100644
--- a/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi
+++ b/arch/arm/boot/dts/marvell/dove-cm-a510.dtsi
@@ -108,18 +108,12 @@ led-system {
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		wifi_power: regulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "WiFi Power";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
-		};
+	wifi_power: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "WiFi Power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/marvell/dove-cubox.dts b/arch/arm/boot/dts/marvell/dove-cubox.dts
index dbba0c8cdab1..bfde99486a87 100644
--- a/arch/arm/boot/dts/marvell/dove-cubox.dts
+++ b/arch/arm/boot/dts/marvell/dove-cubox.dts
@@ -28,24 +28,17 @@ led-power {
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 1 0>;
-			pinctrl-0 = <&pmx_gpio_1>;
-			pinctrl-names = "default";
-		};
+	usb_power: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 1 0>;
+		pinctrl-0 = <&pmx_gpio_1>;
+		pinctrl-names = "default";
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/marvell/dove-d3plug.dts b/arch/arm/boot/dts/marvell/dove-d3plug.dts
index 5aa5d4a7d51d..a451fd576990 100644
--- a/arch/arm/boot/dts/marvell/dove-d3plug.dts
+++ b/arch/arm/boot/dts/marvell/dove-d3plug.dts
@@ -37,24 +37,17 @@ led-status {
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 8 0>;
-			pinctrl-0 = <&pmx_gpio_8>;
-			pinctrl-names = "default";
-		};
+	usb_power: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 8 0>;
+		pinctrl-0 = <&pmx_gpio_8>;
+		pinctrl-names = "default";
 	};
 };
 
diff --git a/arch/arm/boot/dts/marvell/dove-sbc-a510.dts b/arch/arm/boot/dts/marvell/dove-sbc-a510.dts
index df021f9b0117..8585ee5533bf 100644
--- a/arch/arm/boot/dts/marvell/dove-sbc-a510.dts
+++ b/arch/arm/boot/dts/marvell/dove-sbc-a510.dts
@@ -76,22 +76,20 @@ chosen {
 		stdout-path = &uart0;
 	};
 
-	regulators {
-		usb0_power: regulator@2 {
-			compatible = "regulator-fixed";
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
-		};
+	usb0_power: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB Power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
+	};
 
-		mmc_power: regulator@3 {
-			compatible = "regulator-fixed";
-			regulator-name = "MMC Power";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
-		};
+	mmc_power: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MMC Power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
 	};
 };
 
-- 
2.34.1