Re: [RFC PATCH 0/4] Implement a PSCI SYSTEM_RESET2 reboot-mode driver

[Elliot Berman]

On 7/25/2023 12:12 PM, Florian Fainelli wrote:
> Hello,
>
> On 7/24/23 15:30, Elliot Berman wrote:
> > PSCI implements a restart notifier for architectural defined resets.
> > The SYSTEM_RESET2 call allows vendor firmware to define additional reset
> > types which could be mapped to the reboot reason.
> >
> > Implement a driver to wire the reboot-mode framework to make vendor
> > SYSTEM_RESET2 calls on reboot.
> >
> > This is a continuation from 
> > https://lore.kernel.org/all/4a679542-b48d-7e11-f33a-63535a5c68cb@xxxxxxxxxxx/
>
> Would appreciate being CC'd on a the non-RFC postings of this patch. 
> FWIW, my use case is better described with this earlier submission:
>
> https://lore.kernel.org/lkml/20220122035421.4086618-1-f.fainelli@xxxxxxxxx/T/#m74e4243c1af3a8d896e19b573b58f562fa09961d
>
> It would be neat if I could leverage your driver in order to implement 
> this custom "reboot powercycle" implementation. Towards that goal, we 
> would likely need to specify the desired reboot "sub" operation 
> alongside its PSCI SYSTEM_RESET2 reboot type argument?
>
> Thanks!

I think you you want to describe the PSCI vendor reset under a warm 
reboot with command "powercycle"? In other words, my series only lets DT 
describe either reboot_mode (warm) or cmd (powercycle) but not both 
simultaneously?

Please correct me if I got it wrong! Otherwise, I can incorporate way to 
describe vendor reset type matching both reboot_mode and cmd in the DT.

- Elliot