[PATCH 1/2] arm64: dts: rockchip: rk3399: switch to enable-gpios

[Krzysztof Kozlowski]

The recommended name for enable GPIOs property in regulator-gpio is
enable-gpios.  This is also required by bindings:

  rk3399-gru-bob.dtb: ppvar-sd-card-io: Unevaluated properties are not allowed ('enable-gpio' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 23bfba86daab..c9bf1d5c3a42 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -250,7 +250,7 @@ ppvar_sd_card_io: ppvar-sd-card-io {
 		pinctrl-0 = <&sd_io_pwr_en &sd_pwr_1800_sel>;
 
 		enable-active-high;
-		enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
 		states = <1800000 0x1>,
 			 <3000000 0x0>;
-- 
2.34.1