[PATCH v3 3/3] input: pm8xxx-vibrator: add new SPMI vibrator support

[Fenglin Wu]

Add new SPMI vibrator module which is very similar to the SPMI vibrator
module inside PM8916 but just has a finer drive voltage step (1mV vs
100mV) hence its drive level control is expanded to across 2 registers.
Name the module as 'qcom,spmi-vib-gen2', and it can be found in
following Qualcomm PMICs: PMI632, PM7250B, PM7325B, PM7550BA. Also, add
a compatible string 'qcom,spmi-vib-gen1' for SPMI vibrator inside PM8916
to maintain the completeness of the hardware version history.

Signed-off-by: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
---
 drivers/input/misc/pm8xxx-vibrator.c | 37 ++++++++++++++++++++++++++--
 1 file changed, 35 insertions(+), 2 deletions(-)

diff --git a/drivers/input/misc/pm8xxx-vibrator.c b/drivers/input/misc/pm8xxx-vibrator.c
index 77bb0018d4e1..2cbccc5c6cf3 100644
--- a/drivers/input/misc/pm8xxx-vibrator.c
+++ b/drivers/input/misc/pm8xxx-vibrator.c
@@ -17,6 +17,8 @@
 #define SSBI_VIB_DRV_SHIFT		3
 #define SPMI_VIB_DRV_LEVEL_MASK		0xff
 #define SPMI_VIB_DRV_SHIFT		0
+#define SPMI_VIB_DRV2_LEVEL_MASK	0x0f
+#define SPMI_VIB_DRV2_SHIFT		8
 
 #define VIB_MAX_LEVEL_mV	(3100)
 #define VIB_MIN_LEVEL_mV	(1200)
@@ -27,11 +29,13 @@
 enum pm8xxx_vib_type {
 	SSBI_VIB,
 	SPMI_VIB_GEN1,
+	SPMI_VIB_GEN2,
 };
 
 enum {
 	VIB_DRV_REG,
 	VIB_EN_REG,
+	VIB_DRV2_REG,
 	VIB_MAX_REG,
 };
 
@@ -44,6 +48,12 @@ static struct reg_field spmi_vib_gen1_regs[VIB_MAX_REG] = {
 	REG_FIELD(0x46, 7, 7),
 };
 
+static struct reg_field spmi_vib_gen2_regs[VIB_MAX_REG] = {
+	REG_FIELD(0x40, 0, 7),
+	REG_FIELD(0x46, 7, 7),
+	REG_FIELD(0x41, 0, 3),
+};
+
 /**
  * struct pm8xxx_vib - structure to hold vibrator data
  * @vib_input_dev: input device supporting force feedback
@@ -94,6 +104,22 @@ static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on)
 
 	vib->reg_vib_drv = val;
 
+	if (vib->hw_type == SPMI_VIB_GEN2) {
+		mask = SPMI_VIB_DRV2_LEVEL_MASK;
+		shift = SPMI_VIB_DRV2_SHIFT;
+
+		if (on)
+			val = (vib->level >> shift) & mask;
+		else
+			val = 0;
+
+		rc = regmap_field_write(vib->r_fields[VIB_DRV2_REG], val);
+		if (rc < 0)
+			return rc;
+
+		vib->reg_vib_drv |= val << shift;
+	}
+
 	if (vib->hw_type != SSBI_VIB)
 		rc = regmap_field_write(vib->r_fields[VIB_EN_REG], on);
 
@@ -116,10 +142,13 @@ static void pm8xxx_work_handler(struct work_struct *work)
 		vib->active = true;
 		vib->level = ((VIB_MAX_LEVELS * vib->speed) / MAX_FF_SPEED) +
 						VIB_MIN_LEVEL_mV;
-		vib->level /= 100;
+		if (vib->hw_type != SPMI_VIB_GEN2)
+			vib->level /= 100;
 	} else {
 		vib->active = false;
-		vib->level = VIB_MIN_LEVEL_mV / 100;
+		vib->level = VIB_MIN_LEVEL_mV;
+		if (vib->hw_type != SPMI_VIB_GEN2)
+			vib->level /= 100;
 	}
 
 	pm8xxx_vib_set(vib, vib->active);
@@ -200,6 +229,8 @@ static int pm8xxx_vib_probe(struct platform_device *pdev)
 
 		if (vib->hw_type == SPMI_VIB_GEN1)
 			regs = spmi_vib_gen1_regs;
+		else
+			regs = spmi_vib_gen2_regs;
 
 		for (i = 0; i < VIB_MAX_REG; i++)
 			if (regs[i].reg != 0)
@@ -266,6 +297,8 @@ static const struct of_device_id pm8xxx_vib_id_table[] = {
 	{ .compatible = "qcom,pm8058-vib", .data = (void *)SSBI_VIB },
 	{ .compatible = "qcom,pm8921-vib", .data = (void *)SSBI_VIB },
 	{ .compatible = "qcom,pm8916-vib", .data = (void *)SPMI_VIB_GEN1 },
+	{ .compatible = "qcom,spmi-vib-gen1", .data = (void *)SPMI_VIB_GEN1 },
+	{ .compatible = "qcom,spmi-vib-gen2", .data = (void *)SPMI_VIB_GEN2 },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, pm8xxx_vib_id_table);
-- 
2.25.1