[RESEND PATCH v3 11/11] mtd: spi-nor: spansion: switch cypress_nor_get_page_size() to use vreg_offset

From: Tudor Ambarus
Date: Mon Jul 24 2023 - 04:15:00 EST


All users of cypress_nor_get_page_size() retrieve n_dice and vreg_offset
from SFDP. Switch cypress_nor_get_page_size() to always use vreg_offset
so that we use the same code base for both single and multi chip package
flashes. cypress_nor_get_page_size() is now called in the post_sfdp()
hook instead of post_bfpt(), as vreg_offset and n_dice are parsed after
BFPT and we now use them to get the page size in the post_sfdp hook.
Consequently the null checks on n_dice and vreg_offset are moved to
the post_sfdp() hook.

Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
---
drivers/mtd/spi-nor/spansion.c | 105 +++++++++++++--------------------
1 file changed, 42 insertions(+), 63 deletions(-)

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 4027f0038ce5..0b01af33aa57 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -471,28 +471,17 @@ static int cypress_nor_set_addr_mode_nbytes(struct spi_nor *nor)
return 0;
}

-static int cypress_nor_get_page_size_single_chip(struct spi_nor *nor)
-{
- struct spi_mem_op op =
- CYPRESS_NOR_RD_ANY_REG_OP(nor->params->addr_mode_nbytes,
- SPINOR_REG_CYPRESS_CFR3V, 0,
- nor->bouncebuf);
- int ret;
-
- ret = spi_nor_read_any_reg(nor, &op, nor->reg_proto);
- if (ret)
- return ret;
-
- if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR3_PGSZ)
- nor->params->page_size = 512;
- else
- nor->params->page_size = 256;
-
- return 0;
-}
-
-
-static int cypress_nor_get_page_size_mcp(struct spi_nor *nor)
+/**
+ * cypress_nor_get_page_size() - Get flash page size configuration.
+ * @nor: pointer to a 'struct spi_nor'
+ *
+ * The BFPT table advertises a 512B or 256B page size depending on part but the
+ * page size is actually configurable (with the default being 256B). Read from
+ * CFR3V[4] and set the correct size.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int cypress_nor_get_page_size(struct spi_nor *nor)
{
struct spi_mem_op op =
CYPRESS_NOR_RD_ANY_REG_OP(nor->params->addr_mode_nbytes,
@@ -522,23 +511,6 @@ static int cypress_nor_get_page_size_mcp(struct spi_nor *nor)
return 0;
}

-/**
- * cypress_nor_get_page_size() - Get flash page size configuration.
- * @nor: pointer to a 'struct spi_nor'
- *
- * The BFPT table advertises a 512B or 256B page size depending on part but the
- * page size is actually configurable (with the default being 256B). Read from
- * CFR3V[4] and set the correct size.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int cypress_nor_get_page_size(struct spi_nor *nor)
-{
- if (nor->params->n_dice)
- return cypress_nor_get_page_size_mcp(nor);
- return cypress_nor_get_page_size_single_chip(nor);
-}
-
static void cypress_nor_ecc_init(struct spi_nor *nor)
{
/*
@@ -575,20 +547,26 @@ s25fs256t_post_bfpt_fixup(struct spi_nor *nor,
if (nor->bouncebuf[0])
return -ENODEV;

- return cypress_nor_get_page_size(nor);
+ return 0;
}

static int s25fs256t_post_sfdp_fixup(struct spi_nor *nor)
{
struct spi_nor_flash_parameter *params = nor->params;

+ if (!params->n_dice || !params->vreg_offset) {
+ dev_err(nor->dev, "%s failed. The volatile register offset could not be retrieved from SFDP.\n",
+ __func__);
+ return -EOPNOTSUPP;
+ }
+
/* PP_1_1_4_4B is supported but missing in 4BAIT. */
params->hwcaps.mask |= SNOR_HWCAPS_PP_1_1_4;
spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP_1_1_4],
SPINOR_OP_PP_1_1_4_4B,
SNOR_PROTO_1_1_4);

- return 0;
+ return cypress_nor_get_page_size(nor);
}

static int s25fs256t_late_init(struct spi_nor *nor)
@@ -623,10 +601,20 @@ s25hx_t_post_bfpt_fixup(struct spi_nor *nor,

static int s25hx_t_post_sfdp_fixup(struct spi_nor *nor)
{
- struct spi_nor_erase_type *erase_type =
- nor->params->erase_map.erase_type;
+ struct spi_nor_flash_parameter *params = nor->params;
+ struct spi_nor_erase_type *erase_type = params->erase_map.erase_type;
unsigned int i;

+ if (!params->n_dice || !params->vreg_offset) {
+ dev_err(nor->dev, "%s failed. The volatile register offset could not be retrieved from SFDP.\n",
+ __func__);
+ return -EOPNOTSUPP;
+ }
+
+ /* The 2 Gb parts duplicate info and advertise 4 dice instead of 2. */
+ if (params->size == SZ_256M)
+ params->n_dice = 2;
+
/*
* In some parts, 3byte erase opcodes are advertised by 4BAIT.
* Convert them to 4byte erase opcodes.
@@ -644,10 +632,6 @@ static int s25hx_t_post_sfdp_fixup(struct spi_nor *nor)
}
}

- /* The 2 Gb parts duplicate info and advertise 4 dice instead of 2. */
- if (nor->params->size == SZ_256M)
- nor->params->n_dice = 2;
-
return cypress_nor_get_page_size(nor);
}

@@ -655,12 +639,6 @@ static int s25hx_t_late_init(struct spi_nor *nor)
{
struct spi_nor_flash_parameter *params = nor->params;

- if (!params->n_dice || !params->vreg_offset) {
- dev_err(nor->dev, "%s failed. The volatile register offset could not be retrieved from SFDP.\n",
- __func__);
- return -EOPNOTSUPP;
- }
-
/* Fast Read 4B requires mode cycles */
params->reads[SNOR_CMD_READ_FAST].num_mode_clocks = 8;
params->ready = cypress_nor_sr_ready_and_clear;
@@ -694,6 +672,17 @@ static int cypress_nor_set_octal_dtr(struct spi_nor *nor, bool enable)
static int s28hx_t_post_sfdp_fixup(struct spi_nor *nor)
{
struct spi_nor_flash_parameter *params = nor->params;
+
+ if (!params->n_dice || !params->vreg_offset) {
+ dev_err(nor->dev, "%s failed. The volatile register offset could not be retrieved from SFDP.\n",
+ __func__);
+ return -EOPNOTSUPP;
+ }
+
+ /* The 2 Gb parts duplicate info and advertise 4 dice instead of 2. */
+ if (params->size == SZ_256M)
+ params->n_dice = 2;
+
/*
* On older versions of the flash the xSPI Profile 1.0 table has the
* 8D-8D-8D Fast Read opcode as 0x00. But it actually should be 0xEE.
@@ -719,10 +708,6 @@ static int s28hx_t_post_sfdp_fixup(struct spi_nor *nor)
*/
params->rdsr_addr_nbytes = 4;

- /* The 2 Gb parts duplicate info and advertise 4 dice instead of 2. */
- if (params->size == SZ_256M)
- params->n_dice = 2;
-
return cypress_nor_get_page_size(nor);
}

@@ -737,12 +722,6 @@ static int s28hx_t_late_init(struct spi_nor *nor)
{
struct spi_nor_flash_parameter *params = nor->params;

- if (!params->n_dice || !params->vreg_offset) {
- dev_err(nor->dev, "%s failed. The volatile register offset could not be retrieved from SFDP.\n",
- __func__);
- return -EOPNOTSUPP;
- }
-
params->set_octal_dtr = cypress_nor_set_octal_dtr;
params->ready = cypress_nor_sr_ready_and_clear;
cypress_nor_ecc_init(nor);
--
2.34.1