Re: [PATCH] ARM: dts: imx: Set default tuning step for imx7d usdhc0

[wangxiaolei]

On 7/22/23 8:16 AM, Fabio Estevam wrote:
> CAUTION: This email comes from a non Wind River email account!
> Do not click links or open attachments unless you recognize the sender and know the content is safe.
>
> Hi Xiaolei,
>
> On Fri, Jul 21, 2023 at 8:21 PM Xiaolei Wang <xiaolei.wang@xxxxxxxxxxxxx> wrote:
> > If the tuning step is not set, the tuning step is set to 1.
> > For some sd cards, the following Tuning timeout will occur,
> > so set the default tuning step.
> >
> > Tuning failed, falling back to fixed sampling clock
> > mmc0: Tuning failed, falling back to fixed sampling clock
> >
> > Fixes: 1e336aa0c025 ("mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting")
> > Signed-off-by: Xiaolei Wang <xiaolei.wang@xxxxxxxxxxxxx>
> > ---
> >   arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts | 1 +
> >   1 file changed, 1 insertion(+)
> >
> > diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts
> > index 75f1cd14bea1..d7396fbfcaf8 100644
> > --- a/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts
> > +++ b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts
> > @@ -493,6 +493,7 @@ &usdhc1 {
> >          vmmc-supply = <&reg_sd1_vmmc>;
> >          wakeup-source;
> >          keep-power-in-suspend;
> > +       fsl,tuning-step = <2>;
> I wondering if this should be a imx7s.dtsi property instead.
>
> NXP vendor kernel passes:
>
> fsl,tuning-step = <2>;
> fsl,tuning-start-tap = <20>;
>
> https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/arch/arm/boot/dts/imx7s.dtsi#L1216-L1217
>
> Bough? Any suggestions?

Oh, I didn't notice this patch on linux-imx, I refer to the settings in 
https://github.com/nxp-imx/uboot-imx.git,

but it should be the same, I think it is better to bring this patch in

thanks

xiaolei

> Thanks