Re: [PATCH v6 2/3] ARM: dts: imx6qdl: Add Variscite VAR-SOM-MX6 SoM support

[James Hilliard]

On Fri, Jul 21, 2023 at 4:43 AM Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> wrote:
>
> On 21/07/2023 12:33, James Hilliard wrote:
> > This patch adds support for the Variscite VAR_SOM-MX6 SoM with :
> > - i.MX6 Quad or Dual Lite SoC
> > - 256 – 4096 MB DDR3
> > - 4-64 GB eMMC
> > - 128 – 1024 MB SLC NAND
> > - Camera Interface
> > - HDMI+CEC interface
> > - LVDS / DSI / Parallel RGB interfaces
> > - Ethernet RGMII interface
> > - On-SoM Wi-Fi/Bluetooth with WiLink wl183x SDIO Module
> > - SD/MMC/SDIO interface
> > - USB Host + USB OTG interface
> > - I2C interfaces
> > - SPI interfaces
> > - PCI-Express 2.0 interface
> > - on-SoM Audio Codec with HP/Line-In interfaces + DMIC interface
> > - Digital Audio interface
> > - S/PDIF interface
> >
> > Product website : https://www.variscite.com/product/system-on-module-som/cortex-a9/var-som-mx6-cpu-freescale-imx6/
> >
> > Support is handled with a SoM-centric dtsi exporting the default interfaces
> > along the default pinmuxing to be enabled by the board dts file.
> >
> > This file is based on the one provided by Variscite on their own
> > kernel, but adapted for mainline.
> >
> > Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
> > Signed-off-by: James Hilliard <james.hilliard1@xxxxxxxxx>
> > ---
> >  .../arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi | 544 ++++++++++++++++++
> >  1 file changed, 544 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
> >
> > diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
> > new file mode 100644
> > index 000000000000..a7d2aecd83fe
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
> > @@ -0,0 +1,544 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Support for Variscite VAR-SOM-MX6 Module
> > + *
> > + * Copyright 2011 Linaro Ltd.
> > + * Copyright 2012 Freescale Semiconductor, Inc.
> > + * Copyright (C) 2014-2016 Variscite, Ltd.
> > + * Author: Donio Ron <ron.d@xxxxxxxxxxxxx>
> > + * Copyright 2022 Bootlin
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "imx6q.dtsi"
> > +#include <dt-bindings/clock/imx6qdl-clock.h>
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/sound/fsl-imx-audmux.h>
> > +
> > +/ {
> > +     model = "Variscite VAR-SOM-MX6 module";
> > +     compatible = "variscite,var-som-imx6q", "fsl,imx6q";
> > +
> > +     chosen {
> > +             stdout-path = &uart1;
> > +     };
> > +
> > +     memory@10000000 {
> > +             device_type = "memory";
> > +             reg = <0x10000000 0x40000000>;
> > +     };
> > +
> > +     reg_3p3v: regulator-3p3v {
> > +             compatible = "regulator-fixed";
> > +             regulator-name = "3P3V";
> > +             regulator-min-microvolt = <3300000>;
> > +             regulator-max-microvolt = <3300000>;
> > +             regulator-always-on;
> > +     };
> > +
> > +     reg_3v3_touch: reg-3v3-touch {
>
> The prefix is still different than all others. You used "regulator" in
> other places, but here it is "reg". Keep your code consistent.

Ok, I'll change it to this when I send my v7:
reg_3v3_touch: regulator-3v3-touch

>
> > +             compatible = "regulator-fixed";
> > +             regulator-name = "touch_3v3_supply";
> > +             regulator-always-on;
>
> Also, missing constraints.

Hmm, what's the correct way to determine the constraint values?

I'm guessing they should just be set to this based on the name?:
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;

>
>
> Best regards,
> Krzysztof
>