Re: [PATCH v5 2/2] net: phy: motorcomm: Add pad drive strength cfg support

[Andrew Lunn]

On Thu, Jul 20, 2023 at 07:15:09PM +0800, Samin Guo wrote:
> The motorcomm phy (YT8531) supports the ability to adjust the drive
> strength of the rx_clk/rx_data, and the default strength may not be
> suitable for all boards. So add configurable options to better match
> the boards.(e.g. StarFive VisionFive 2)
> 
> When we configure the drive strength, we need to read the current
> LDO voltage value to ensure that it is a legal value at that LDO
> voltage.
> 
> Reviewed-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
> Signed-off-by: Samin Guo <samin.guo@xxxxxxxxxxxxxxxx>

Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

    Andrew