[PATCH 2/4] arm64: dts: qcom: sm8350: Update the RPMHPD bindings entry

From: Rohit Agarwal
Date: Thu Jul 20 2023 - 04:09:33 EST

Next message: Rohit Agarwal: "[PATCH 3/4] arm64: dts: qcom: sm8450: Update the RPMHPD bindings entry"
Previous message: Rohit Agarwal: "[PATCH 4/4] arm64: dts: qcom: sm8550: Update the RPMHPD bindings entry"
In reply to: Rohit Agarwal: "[PATCH 4/4] arm64: dts: qcom: sm8550: Update the RPMHPD bindings entry"
Next in thread: Rohit Agarwal: "[PATCH 3/4] arm64: dts: qcom: sm8450: Update the RPMHPD bindings entry"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Update the RPMHPD bindings entry as per the new generic bindings defined in
rpmhpd.h for SM8350 SoC.

Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 75 ++++++++++++++++++------------------
1 file changed, 38 insertions(+), 37 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 88ef478..edc072e 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -15,6 +15,7 @@
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/power/qcom,rpmhpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/interconnect/qcom,sm8350.h>
@@ -737,7 +738,7 @@
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_120mhz>;
dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
<&gpi_dma2 1 0 QCOM_GPI_SPI>;
@@ -769,7 +770,7 @@
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_120mhz>;
dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
<&gpi_dma2 1 1 QCOM_GPI_SPI>;
@@ -801,7 +802,7 @@
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
<&gpi_dma2 1 2 QCOM_GPI_SPI>;
@@ -833,7 +834,7 @@
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
<&gpi_dma2 1 3 QCOM_GPI_SPI>;
@@ -851,7 +852,7 @@
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
<&gpi_dma2 1 4 QCOM_GPI_SPI>;
@@ -869,7 +870,7 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart18_default>;
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
status = "disabled";
};
@@ -896,7 +897,7 @@
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
<&gpi_dma2 1 5 QCOM_GPI_SPI>;
@@ -963,7 +964,7 @@
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
<&gpi_dma0 1 0 QCOM_GPI_SPI>;
@@ -995,7 +996,7 @@
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
<&gpi_dma0 1 1 QCOM_GPI_SPI>;
@@ -1027,7 +1028,7 @@
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
<&gpi_dma0 1 2 QCOM_GPI_SPI>;
@@ -1045,7 +1046,7 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart3_default_state>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
status = "disabled";
};
@@ -1058,7 +1059,7 @@
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
<&gpi_dma0 1 3 QCOM_GPI_SPI>;
@@ -1090,7 +1091,7 @@
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
<&gpi_dma0 1 4 QCOM_GPI_SPI>;
@@ -1122,7 +1123,7 @@
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
<&gpi_dma0 1 5 QCOM_GPI_SPI>;
@@ -1154,7 +1155,7 @@
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
<&gpi_dma0 1 6 QCOM_GPI_SPI>;
@@ -1172,7 +1173,7 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart6_default>;
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
status = "disabled";
};
@@ -1199,7 +1200,7 @@
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
<&gpi_dma0 1 7 QCOM_GPI_SPI>;
@@ -1266,7 +1267,7 @@
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_120mhz>;
dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
<&gpi_dma1 1 0 QCOM_GPI_SPI>;
@@ -1298,7 +1299,7 @@
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
<&gpi_dma1 1 1 QCOM_GPI_SPI>;
@@ -1330,7 +1331,7 @@
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
<&gpi_dma1 1 2 QCOM_GPI_SPI>;
@@ -1362,7 +1363,7 @@
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
<&gpi_dma1 1 3 QCOM_GPI_SPI>;
@@ -1394,7 +1395,7 @@
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
<&gpi_dma1 1 4 QCOM_GPI_SPI>;
@@ -1426,7 +1427,7 @@
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
<&gpi_dma1 1 5 QCOM_GPI_SPI>;
@@ -2003,8 +2004,8 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";

- power-domains = <&rpmhpd SM8350_CX>,
- <&rpmhpd SM8350_MSS>;
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MSS>;
power-domain-names = "cx", "mss";

interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
@@ -2044,8 +2045,8 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";

- power-domains = <&rpmhpd SM8350_LCX>,
- <&rpmhpd SM8350_LMX>;
+ power-domains = <&rpmhpd RPMHPD_LCX>,
+ <&rpmhpd RPMHPD_LMX>;
power-domain-names = "lcx", "lmx";

memory-region = <&pil_slpi_mem>;
@@ -2114,7 +2115,7 @@
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
interconnect-names = "sdhc-ddr","cpu-sdhc";
iommus = <&apps_smmu 0x4a0 0x0>;
- power-domains = <&rpmhpd SM8350_CX>;
+ power-domains = <&rpmhpd RPMHPD_CX>;
operating-points-v2 = <&sdhc2_opp_table>;
bus-width = <4>;
dma-coherent;
@@ -2475,7 +2476,7 @@
assigned-clock-rates = <19200000>;

operating-points-v2 = <&dpu_opp_table>;
- power-domains = <&rpmhpd SM8350_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;

interrupt-parent = <&mdss>;
interrupts = <0>;
@@ -2538,7 +2539,7 @@
#sound-dai-cells = <0>;

operating-points-v2 = <&dp_opp_table>;
- power-domains = <&rpmhpd SM8350_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;

status = "disabled";

@@ -2606,7 +2607,7 @@
<&mdss_dsi0_phy 1>;

operating-points-v2 = <&dsi0_opp_table>;
- power-domains = <&rpmhpd SM8350_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;

phys = <&mdss_dsi0_phy>;

@@ -2704,7 +2705,7 @@
<&mdss_dsi1_phy 1>;

operating-points-v2 = <&dsi1_opp_table>;
- power-domains = <&rpmhpd SM8350_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;

phys = <&mdss_dsi1_phy>;

@@ -2795,7 +2796,7 @@
#reset-cells = <1>;
#power-domain-cells = <1>;

- power-domains = <&rpmhpd SM8350_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
};

pdc: interrupt-controller@b220000 {
@@ -3188,8 +3189,8 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";

- power-domains = <&rpmhpd SM8350_LCX>,
- <&rpmhpd SM8350_LMX>;
+ power-domains = <&rpmhpd RPMHPD_LCX>,
+ <&rpmhpd RPMHPD_LMX>;
power-domain-names = "lcx", "lmx";

memory-region = <&pil_adsp_mem>;
@@ -3417,8 +3418,8 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";

- power-domains = <&rpmhpd SM8350_CX>,
- <&rpmhpd SM8350_MXC>;
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>;
power-domain-names = "cx", "mxc";

interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
--
2.7.4

Next message: Rohit Agarwal: "[PATCH 3/4] arm64: dts: qcom: sm8450: Update the RPMHPD bindings entry"
Previous message: Rohit Agarwal: "[PATCH 4/4] arm64: dts: qcom: sm8550: Update the RPMHPD bindings entry"
In reply to: Rohit Agarwal: "[PATCH 4/4] arm64: dts: qcom: sm8550: Update the RPMHPD bindings entry"
Next in thread: Rohit Agarwal: "[PATCH 3/4] arm64: dts: qcom: sm8450: Update the RPMHPD bindings entry"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]