Re: [PATCH] power: supply: core: Avoid duplicate hwmon device from thermal framework

[Sebastian Reichel]

Hi,

On Tue, Jun 13, 2023 at 05:07:23PM +0800, Chen-Yu Tsai wrote:
> When the power supply device being registered supports a temperature
> readout, the core registers a thermal zone for it. The thermal core
> would register a hwmon device for that unless told otherwise.
> 
> When CONFIG_POWER_SUPPLY_HWMON is enabled, the power supply core creates
> a hwmon device. This results in a second entry, one which has a better
> name than the one registered through the thermal framework. It could
> potentially have readouts other than temperature.
> 
> To simplify the result, tell the thermal framework to not register a
> hwmon device if CONFIG_POWER_SUPPLY_HWMON is enabled. The result is
> one hwmon device with all the readings the device supports.

Thanks, queued.

-- Sebastian

>  drivers/power/supply/power_supply_core.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c
> index 3791aec69ddc..4aa466c945e2 100644
> --- a/drivers/power/supply/power_supply_core.c
> +++ b/drivers/power/supply/power_supply_core.c
> @@ -1305,8 +1305,12 @@ static int psy_register_thermal(struct power_supply *psy)
>  
>  	/* Register battery zone device psy reports temperature */
>  	if (psy_has_property(psy->desc, POWER_SUPPLY_PROP_TEMP)) {
> +		/* Prefer our hwmon device and avoid duplicates */
> +		struct thermal_zone_params tzp = {
> +			.no_hwmon = IS_ENABLED(CONFIG_POWER_SUPPLY_HWMON)
> +		};
>  		psy->tzd = thermal_zone_device_register(psy->desc->name,
> -				0, 0, psy, &psy_tzd_ops, NULL, 0, 0);
> +				0, 0, psy, &psy_tzd_ops, &tzp, 0, 0);
>  		if (IS_ERR(psy->tzd))
>  			return PTR_ERR(psy->tzd);
>  		ret = thermal_zone_device_enable(psy->tzd);
> -- 
> 2.41.0.162.gfafddb0af9-goog
>

Attachment: signature.asc
Description: PGP signature