Re: [PATCH v3 3/3] hwmon: (peci/dimmtemp) Add Sapphire Rapids support

[Winiarska, Iwona]

On Wed, 2023-07-19 at 20:41 +0200, Naresh Solanki wrote:
> From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
> 
> This patch extends the functionality of the hwmon (peci/dimmtemp) to
> include support for Sapphire Rapids platform.
> 
> Sapphire Rapids can accommodate up to 8 CPUs, each with 16 DIMMs. To
> accommodate this configuration, the maximum supported DIMM count is
> increased, and the corresponding Sapphire Rapids ID and threshold code
> are added.
> 
> The patch has been tested on a 4S system with 64 DIMMs installed.
> Default thresholds are utilized for Sapphire Rapids, as accessing the
> threshold requires accessing the UBOX device on Uncore bus 0, which can
> only be achieved using MSR access. The non-PCI-compliant MMIO BARs are
> not available for this purpose.
> 
> Signed-off-by: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
> Signed-off-by: Naresh Solanki <Naresh.Solanki@xxxxxxxxxxxxx>
> Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx>
> ---
> Changes in V3:
> - Update Acked-by in commit message.
> Changes in V2:
> - Update subject.
> ---
>  drivers/hwmon/peci/dimmtemp.c | 24 +++++++++++++++++++++++-
>  1 file changed, 23 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/hwmon/peci/dimmtemp.c b/drivers/hwmon/peci/dimmtemp.c
> index ed968401f93c..edafbfd66fef 100644
> --- a/drivers/hwmon/peci/dimmtemp.c
> +++ b/drivers/hwmon/peci/dimmtemp.c
> @@ -30,8 +30,10 @@
>  #define DIMM_IDX_MAX_ON_ICX    2
>  #define CHAN_RANK_MAX_ON_ICXD  4
>  #define DIMM_IDX_MAX_ON_ICXD   2
> +#define CHAN_RANK_MAX_ON_SPR   128

Where was this number taken from?
Single CPU has 8 channels (not 128), and dimmtemp hwmon binds to a single CPU.

> +#define DIMM_IDX_MAX_ON_SPR    2
>  
> -#define CHAN_RANK_MAX          CHAN_RANK_MAX_ON_HSX
> +#define CHAN_RANK_MAX          CHAN_RANK_MAX_ON_SPR

Then - there's no need for changing the MAX value.

>  #define DIMM_IDX_MAX           DIMM_IDX_MAX_ON_HSX
>  #define DIMM_NUMS_MAX          (CHAN_RANK_MAX * DIMM_IDX_MAX)
>  
> @@ -530,6 +532,15 @@ read_thresholds_icx(struct peci_dimmtemp *priv, int
> dimm_order, int chan_rank, u
>         return 0;
>  }
>  
> +static int
> +read_thresholds_spr(struct peci_dimmtemp *priv, int dimm_order, int
> chan_rank, u32 *data)
> +{
> +       /* Use defaults */
> +       *data = (95 << 16) | (90 << 8);
> +
> +       return 0;
> +}
> +

Rather than hardcoding the defaults, it should be possible to compute it in a
similar way to ICX (and with that - commit message should be updated).
We're starting from 1e:00.2 instead of 13:00.2, and offsets within IMC start
from 0x219a8 with 0x8000 shift.
It would look like this (note - not tested on actual SPR):

static int
read_thresholds_spr(struct peci_dimmtemp *priv, int dimm_order, int chan_rank, u32 *data)
{
	u32 reg_val;
	u64 offset;
	int ret;
	u8 dev;

	ret = peci_ep_pci_local_read(priv->peci_dev, 0, 30, 0, 2, 0xd4, &reg_val);
	if (ret || !(reg_val & BIT(31)))
		return -ENODATA; /* Use default or previous value */

	ret = peci_ep_pci_local_read(priv->peci_dev, 0, 30, 0, 2, 0xd0, &reg_val);
	if (ret)
		return -ENODATA; /* Use default or previous value */

	/*
	 * Device 26, Offset 219a8: IMC 0 channel 0 -> rank 0
	 * Device 26, Offset 299a8: IMC 0 channel 1 -> rank 1
	 * Device 27, Offset 219a8: IMC 1 channel 0 -> rank 2
	 * Device 27, Offset 299a8: IMC 1 channel 1 -> rank 3
	 * Device 28, Offset 219a8: IMC 2 channel 0 -> rank 4
	 * Device 28, Offset 299a8: IMC 2 channel 1 -> rank 5
	 * Device 29, Offset 219a8: IMC 3 channel 0 -> rank 6
	 * Device 29, Offset 299a8: IMC 3 channel 1 -> rank 7
	 */
	dev = 26 + chan_rank / 2;
	offset = 0x219a8 + dimm_order * 4 + (chan_rank % 2) * 0x8000;

	ret = peci_mmio_read(priv->peci_dev, 0, GET_CPU_SEG(reg_val), GET_CPU_BUS(reg_val),
			     dev, 0, offset, data);
	if (ret)
		return ret;

	return 0;
}

Thanks
-Iwona

>  static const struct dimm_info dimm_hsx = {
>         .chan_rank_max  = CHAN_RANK_MAX_ON_HSX,
>         .dimm_idx_max   = DIMM_IDX_MAX_ON_HSX,
> @@ -572,6 +583,13 @@ static const struct dimm_info dimm_icxd = {
>         .read_thresholds = &read_thresholds_icx,
>  };
>  
> +static const struct dimm_info dimm_spr = {
> +       .chan_rank_max  = CHAN_RANK_MAX_ON_SPR,
> +       .dimm_idx_max   = DIMM_IDX_MAX_ON_SPR,
> +       .min_peci_revision = 0x40,
> +       .read_thresholds = &read_thresholds_spr,
> +};
> +
>  static const struct auxiliary_device_id peci_dimmtemp_ids[] = {
>         {
>                 .name = "peci_cpu.dimmtemp.hsx",
> @@ -597,6 +615,10 @@ static const struct auxiliary_device_id
> peci_dimmtemp_ids[] = {
>                 .name = "peci_cpu.dimmtemp.icxd",
>                 .driver_data = (kernel_ulong_t)&dimm_icxd,
>         },
> +       {
> +               .name = "peci_cpu.dimmtemp.spr",
> +               .driver_data = (kernel_ulong_t)&dimm_spr,
> +       },
>         { }
>  };
>  MODULE_DEVICE_TABLE(auxiliary, peci_dimmtemp_ids);