Re: [PATCH v7 5/7] clk: starfive: jh7110-sys: Add PLL clocks source from DTS

[Emil Renner Berthing]

On Mon, 17 Jul 2023 at 04:30, Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx> wrote:
>
> Modify PLL clocks source to be got from DTS or
> the fixed factor clocks.
>
> Signed-off-by: Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
> ---
>  drivers/clk/starfive/Kconfig                  |  1 +
>  .../clk/starfive/clk-starfive-jh7110-sys.c    | 66 ++++++++++++-------
>  2 files changed, 45 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
> index 5195f7be5213..978b78ec08b1 100644
> --- a/drivers/clk/starfive/Kconfig
> +++ b/drivers/clk/starfive/Kconfig
> @@ -35,6 +35,7 @@ config CLK_STARFIVE_JH7110_SYS
>         select AUXILIARY_BUS
>         select CLK_STARFIVE_JH71X0
>         select RESET_STARFIVE_JH7110 if RESET_CONTROLLER
> +       select CLK_STARFIVE_JH7110_PLL
>         default ARCH_STARFIVE
>         help
>           Say yes here to support the system clock controller on the
> diff --git a/drivers/clk/starfive/clk-starfive-jh7110-sys.c b/drivers/clk/starfive/clk-starfive-jh7110-sys.c
> index e6031345ef05..3884eff9fe93 100644
> --- a/drivers/clk/starfive/clk-starfive-jh7110-sys.c
> +++ b/drivers/clk/starfive/clk-starfive-jh7110-sys.c
> @@ -7,6 +7,7 @@
>   */
>
>  #include <linux/auxiliary_bus.h>
> +#include <linux/clk.h>
>  #include <linux/clk-provider.h>
>  #include <linux/init.h>
>  #include <linux/io.h>
> @@ -389,6 +390,7 @@ static int __init jh7110_syscrg_probe(struct platform_device *pdev)
>         struct jh71x0_clk_priv *priv;
>         unsigned int idx;
>         int ret;
> +       struct clk *pllclk;
>
>         priv = devm_kzalloc(&pdev->dev,
>                             struct_size(priv, reg, JH7110_SYSCLK_END),
> @@ -402,28 +404,42 @@ static int __init jh7110_syscrg_probe(struct platform_device *pdev)
>         if (IS_ERR(priv->base))
>                 return PTR_ERR(priv->base);
>
> -       /*
> -        * These PLL clocks are not actually fixed factor clocks and can be
> -        * controlled by the syscon registers of JH7110. They will be dropped
> -        * and registered in the PLL clock driver instead.
> -        */
> -       /* 24MHz -> 1000.0MHz */
> -       priv->pll[0] = devm_clk_hw_register_fixed_factor(priv->dev, "pll0_out",
> -                                                        "osc", 0, 125, 3);
> -       if (IS_ERR(priv->pll[0]))
> -               return PTR_ERR(priv->pll[0]);
> -
> -       /* 24MHz -> 1066.0MHz */
> -       priv->pll[1] = devm_clk_hw_register_fixed_factor(priv->dev, "pll1_out",
> -                                                        "osc", 0, 533, 12);
> -       if (IS_ERR(priv->pll[1]))
> -               return PTR_ERR(priv->pll[1]);
> -
> -       /* 24MHz -> 1188.0MHz */
> -       priv->pll[2] = devm_clk_hw_register_fixed_factor(priv->dev, "pll2_out",
> -                                                        "osc", 0, 99, 2);
> -       if (IS_ERR(priv->pll[2]))
> -               return PTR_ERR(priv->pll[2]);
> +       /* Use fixed factor clocks if can not get the PLL clocks from DTS */
> +       pllclk = clk_get(priv->dev, "pll0_out");
> +       if (IS_ERR(pllclk)) {
> +               /* 24MHz -> 1000.0MHz */
> +               priv->pll[0] = devm_clk_hw_register_fixed_factor(priv->dev, "pll0_out",
> +                                                                "osc", 0, 125, 3);
> +               if (IS_ERR(priv->pll[0]))
> +                       return PTR_ERR(priv->pll[0]);
> +       } else {
> +               clk_put(pllclk);
> +               priv->pll[0] = NULL;

Not really important enough for a respin, but setting these to NULL is
not needed as devm_kzalloc() already zeroes the memory allocated.

In any case:
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>

> +       }
> +
> +       pllclk = clk_get(priv->dev, "pll1_out");
> +       if (IS_ERR(pllclk)) {
> +               /* 24MHz -> 1066.0MHz */
> +               priv->pll[1] = devm_clk_hw_register_fixed_factor(priv->dev, "pll1_out",
> +                                                                "osc", 0, 533, 12);
> +               if (IS_ERR(priv->pll[1]))
> +                       return PTR_ERR(priv->pll[1]);
> +       } else {
> +               clk_put(pllclk);
> +               priv->pll[1] = NULL;
> +       }
> +
> +       pllclk = clk_get(priv->dev, "pll2_out");
> +       if (IS_ERR(pllclk)) {
> +               /* 24MHz -> 1188.0MHz */
> +               priv->pll[2] = devm_clk_hw_register_fixed_factor(priv->dev, "pll2_out",
> +                                                                "osc", 0, 99, 2);
> +               if (IS_ERR(priv->pll[2]))
> +                       return PTR_ERR(priv->pll[2]);
> +       } else {
> +               clk_put(pllclk);
> +               priv->pll[2] = NULL;
> +       }
>
>         for (idx = 0; idx < JH7110_SYSCLK_END; idx++) {
>                 u32 max = jh7110_sysclk_data[idx].max;
> @@ -462,6 +478,12 @@ static int __init jh7110_syscrg_probe(struct platform_device *pdev)
>                                 parents[i].fw_name = "tdm_ext";
>                         else if (pidx == JH7110_SYSCLK_MCLK_EXT)
>                                 parents[i].fw_name = "mclk_ext";
> +                       else if (pidx == JH7110_SYSCLK_PLL0_OUT && !priv->pll[0])
> +                               parents[i].fw_name = "pll0_out";
> +                       else if (pidx == JH7110_SYSCLK_PLL1_OUT && !priv->pll[1])
> +                               parents[i].fw_name = "pll1_out";
> +                       else if (pidx == JH7110_SYSCLK_PLL2_OUT && !priv->pll[2])
> +                               parents[i].fw_name = "pll2_out";
>                         else
>                                 parents[i].hw = priv->pll[pidx - JH7110_SYSCLK_PLL0_OUT];
>                 }
> --
> 2.25.1
>