Re: [PATCH v3 3/3] arm64: dts: amlogic: add reset controller for Amlogic C3 SoC
From: Dmitry Rokosov
Date: Wed Jul 19 2023 - 07:52:30 EST
On Wed, Jul 19, 2023 at 02:09:54PM +0800, zelong dong wrote:
> From: Zelong Dong <zelong.dong@xxxxxxxxxxx>
>
> Add the reset controller device of Amlogic C3 SoC family
>
> Signed-off-by: Zelong Dong <zelong.dong@xxxxxxxxxxx>
Reviewed-by: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> index 60ad4f3eef9d..28698c42e11e 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> @@ -6,6 +6,7 @@
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/reset/amlogic,c3-reset.h>
>
> / {
> cpus {
> @@ -72,6 +73,12 @@ apb4: bus@fe000000 {
> #size-cells = <2>;
> ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
>
> + reset: reset-controller@2000 {
> + compatible = "amlogic,c3-reset";
> + reg = <0x0 0x2000 0x0 0x98>;
> + #reset-cells = <1>;
> + };
> +
> uart_b: serial@7a000 {
> compatible = "amlogic,meson-s4-uart",
> "amlogic,meson-ao-uart";
> --
> 2.35.1
>
>
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-amlogic
--
Thank you,
Dmitry