Re: [PATCH 3/4] dt-bindings: pinctrl-zynqmp: Add output-enable configuration

[Conor Dooley]

On Mon, Jul 17, 2023 at 03:03:46PM +0530, Sai Krishna Potthuri wrote:
> Add 'output-enable' configuration parameter to the properties list.
> 
> Using these pinctrl properties observed hang issues with older Xilinx
> ZynqMP Platform Management Firmware, hence reverted the patch previously.
> Commit ff8356060e3a5e126abb ("Revert "dt-bindings: pinctrl-zynqmp: Add
> output-enable configuration"").

And what has changed since then that makes it okay to add?
Is the old firmware not still in the wild?

Thanks,
Conor.

> 
> Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@xxxxxxx>
> ---
>  .../devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml      | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
> index 2722dc7bb03d..1e2b9b627b12 100644
> --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
> @@ -274,6 +274,10 @@ patternProperties:
>            slew-rate:
>              enum: [0, 1]
>  
> +          output-enable:
> +            description:
> +              This will internally disable the tri-state for MIO pins.
> +
>            drive-strength:
>              description:
>                Selects the drive strength for MIO pins, in mA.
> -- 
> 2.25.1
>

Attachment: signature.asc
Description: PGP signature