[V3,11/11] arm64: dts: qcom: ipq9574: Add nodes to bring up multipd

[Manikanta Mylavarapu]

Enable nodes required for multipd remoteproc bring up.

Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
---
Changes in V3:
	- Fixed all comments and rebased for TOT.
	- Removed WCSS userpd nodes from dtsi file,
	  because it vary based on no of radio's connected.
 
Changes in V2:
	- Corrected syntax like alignmnet and kept nodes in sorted
	  order.
	- Added 'firmware-name' property.

 arch/arm64/boot/dts/qcom/ipq9574.dtsi | 59 +++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index a21225007f60..f8273408f698 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -198,6 +198,11 @@ smem@4aa00000 {
 			hwlocks = <&tcsr_mutex 0>;
 			no-map;
 		};
+
+		q6_region: wcnss@4ab00000 {
+			reg = <0x0 0x4ab00000 0x0 0x2b00000>;
+			no-map;
+		};
 	};
 
 	soc: soc@0 {
@@ -714,6 +719,36 @@ frame@b128000 {
 				status = "disabled";
 			};
 		};
+
+		q6v5_wcss: remoteproc@cd00000 {
+			compatible = "qcom,ipq9574-q6-mpd";
+			reg = <0x0cd00000 0x4040>;
+			firmware-name = "ath11k/IPQ9574/hw1.0/q6_fw.mdt",
+					"ath11k/IPQ9574/hw1.0/m3_fw.mdt";
+			interrupts-extended = <&intc GIC_SPI 325 IRQ_TYPE_EDGE_RISING>,
+					      <&wcss_smp2p_in 0 IRQ_TYPE_NONE>,
+					      <&wcss_smp2p_in 1 IRQ_TYPE_NONE>,
+					      <&wcss_smp2p_in 2 IRQ_TYPE_NONE>,
+					      <&wcss_smp2p_in 3 IRQ_TYPE_NONE>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			qcom,smem-states = <&wcss_smp2p_out 0>,
+					   <&wcss_smp2p_out 1>;
+			qcom,smem-state-names = "shutdown",
+						"stop";
+			memory-region = <&q6_region>;
+
+			glink-edge {
+				interrupts = <GIC_SPI 321 IRQ_TYPE_EDGE_RISING>;
+				label = "rtr";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 8>;
+			};
+		};
 	};
 
 	thermal-zones {
@@ -971,4 +1006,28 @@ timer {
 			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
+
+	wcss: wcss-smp2p {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_SPI 322 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 9>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		wcss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		wcss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
 };
-- 
2.34.1