[PATCH v9 2/7] dt-bindings: soc: qcom: eud: Document vendor-specific 'secure mode' property

[Bhupesh Sharma]

On some SoCs (like the SM6115 / SM4250 SoC), the enable bit inside
'tcsr_check_reg' needs to be set first to 'enable' EUD mode.

So introduce a vendor-specific dt-property 'qcom,secure-eud-reg'
which specifies the base address of the TCSR reg space and the offset
of the 'tcsr_check_reg'.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
index f2c5ec7e6437b..ca38d219e57d5 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml
@@ -45,6 +45,14 @@ properties:
         $ref: /schemas/graph.yaml#/properties/port
         description: This port is to be attached to the type C connector.
 
+  qcom,secure-eud-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to TCSR hardware block
+          - description: offset of the secure mode manager register
+    description: TCSR hardware block
+
 required:
   - compatible
   - reg
-- 
2.38.1